KENNEDY PROFESSIONAL

All products are quality tested and fully insulated to 1000V AC. Conforms to VDE 0680/201 ( except extension bars) and EN 60900:2012 standards. All 1/2" square drive.Insulated Reversible Ratchet...

Single End Open Jaw.Chrome vanadium single ended open jaw spanners.Fully insulated to conform to VDE 0680/201 and EN 60900:2012 standards for safe electrical applications up to 1000V.Spanner...

nsulated Single End Ring SpannersChrome vanadium single ended open jaw spanners. Spanner dimensions conform to DIN 7446. Fully insulated to conform to VDE 0680/201 and EN 60900:2012 standards for...

1/2" Square DriveConform to DIN3124.The Ken-Grip® socket offers a new standard of performance with the ability to grip up to 95% of a rounded fastener. It has a unique patented design that grips...

3/8" Square DriveConform to DIN3124.The Ken-Grip® socket offers a new standard of performance with the ability to grip up to 95% of a rounded fastener. It has a unique patented design that grips...

Chrome vanadium wrenches designed to be used for getting into tight spots and hard to reach areas, in particular around tubing such as hydraulic lines etc.For use with 3/8" square drive tools...

Designed to engage the nut from the side. As it only engages on two faces of the fastener, care must be taken to ensure that the correct size spanner is always used. Tapered handle for assisting with...

MetricChrome vanadium steel. 15° cranked open end. Offset ring end. Up to 25% longer than conventional DIN 3113 combination spanners. Conform to DIN 3113B.Chrome plated finish to pevent from...

Open End16mm Bore - Metric • End Type Open Ended• Spigot Size 16mm• Spanner Size 19mm

Metric.Manufactured from chrome vanadium steel. Highly polished mirror finish prevents oil and dirt from adhering to the spanner making for easier cleaning and preventing rust. Long reach, wall drive...

Chrome vanadium steel with mirror polish finish, preventing oil and dirt from adhering to the spanner, making for easier cleaning and preventing rust. 72-teeth ratcheting system which needs only...

MetricBi-hexagonal 15 degree offset rings with a 72 teeth lever ratcheting system that requires only 5 degree movement to operate, making them ideal for use in tight areas. Made from high quality...

Cranked handle assists with location of spanner on to fixings within a recess. • Spanner Size 19mm• Material Chrome Vandadium Steel• Overall...

Ring End16mm Bore - Metric • End Type Ring End• Spigot Size 16mm• Spanner Size 19mm

MetricManufactured from quality chrome vanadium steel with hardened jaws and high polish mirror finish, corrosion-resistant and easy to clean.The jaws and ring are offset at 15° for easier...

Manufactured from quality chrome vanadium steel with hardened jaws and high polish mirror finish, corrosion resistant and easy to clean. Conforms to ANSI 8107.6.   • Head...

Single-Hexagon SocketsSix point - offer a more positive location, particularly on worn or rounded nuts, but require a one-sixth turn to engage the next point of the socket...

Single-Hexagon Sockets6 point - Offer a more positive location, particularly on worn or rounded nuts, but require a one-sixth turn to engage the next point of the socket.   • Socket...

Bi-Hexagon Sockets12 point - side drive design gives a higher torque than normal sockets, grip worn nuts and will not round off existing nuts.All have a ball-retaining groove on each face of the...

Bi-Hexagon Sockets12 point - side drive design gives a higher torque than normal sockets, grip worn nuts and will not round off existing nuts.All have a ball-retaining groove on each face of the...

Combination SpannersSpark-resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive environments. They resist the sparks that a...

Combination SpannersSpark-resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive environments. They resist the sparks that a...

Ring End Slogging WrenchWith flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.Spark-resistant tools are used to eliminate the chances of accidental fires...

Single Open End SpannersSpark-resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive environments. They resist the sparks that a...

Sockets12 point bi-hexagon.Spark-resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive environments. They resist the sparks that...

1/2" Sq. Dr. Spark Resistant SocketBeryllium Copper**Image for illustration purpose only • Material Beryllium Copper• Standards Met DIN3120• Square...

Sockets12 point bi-hexagon.Spark-resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive environments. They resist the sparks that...

Socket sizes: 17 and 19mm.Colour coded for easy identification. Can be used with retainer rings or pins. • Socket End Diameter 27mm• Socket Size 19mm• Socket...

Single-EndedMade from chrome vanadium steel with a black oxidised finish. Conform to DIN 894. • Overall Length 170mm• Type Open Ended...

MetricChrome vanadium steel (except * which are made from drop forged carbon steel) with a satin finish body and highly polished heads, with a 15° offset.DIN 3110: 4 x 5mm to 32 x 36mm.ASME B107...

Made from chrome vanadium steel with a satin finish body and highly polished heads, with double ended closed jaw bi-hexagon offset. Conform to DIN 838.   • Material Chrome...

MetricChrome vanadium steel (except * which are made from drop forged carbon steel) with a satin finish body and highly polished heads, with a 15° offset.DIN 3110: 4 x 5mm to 32 x 36mm.ASME B107...

MetricChrome vanadium steel (except * which are made from drop forged carbon steel) with a satin finish body and highly polished heads, with a 15° offset.DIN 3110: 4 x 5mm to 32 x 36mm.ASME B107...

For insertion and removal of fasteners and fixings using 1/2" square drive tooling. Made from chrome vanadium steel, fully chrome plated with a mirror finish and aluminium-free. All have ball...

Double-EndedMade from chrome vanadium steel with a black oxidised finish. Conform to DIN 895. • Overall Length 195mm• Type Open Ended...

Chrome vanadium steel. Suitable for heavy-duty construction applications. Ratchet action for use in confined spaces. Reversible head has two internal bi-hexagon sizes. Podger wrenches have tapered...

Double-EndedMade from chrome vanadium steel with a black oxidised finish. Conform to DIN 895. • Overall Length 205mm• Type Open Ended...

• Grips nuts and bolts which are up to 95% rounded off.• Will not damage new, worn or rusted nuts and bolts.• Fits a wide range Metric, UNC, UNF, BSW, BSF and E-Torx® sizes.•...

• Grips nuts and bolts which are up to 95% rounded off.• Will not damage new, worn or rusted nuts and bolts.• Fits a wide range Metric, UNC, UNF, BSW, BSF and E-Torx® sizes.•...

Inverted Cone.All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank.Cut Numbers:Cut 9 - ChipbreakerChipbreaker fast stock removal for improved control and reduced chips for...

Cylindrical Plain End.All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank.Cut Numbers:Cut 3 - Rapid CutFor use on softer non-ferrous and plastic materials, i.e. aluminium,...

BA. Conform to BS 1842 : 1952.15° Head Angle   • Overall Length 67mm • Type Open Ended Spanner • Finish/Coating Satin • Single or...

Machinists hammers suitable for use on metal. Manufactured to European DIN 1041 standard. • Overall Length 360mm• Shaft Material Wood• Head Material Drop...

Tested to the requirements of BS 876: 1995 (head stamped BS 876). Crack tested and heat treated handles. • Shaft Length 310mm• Head Weight 1lb• Shaft...

With textured slip resistant rubber grip. Shaft and grip combine to dampen the impact transmitted through to the user's hand and wrist. Reduces operator fatigue and the risk of RSI (Repetitive Strain...

Ball pein hammers are manufactured from high-grade drop forged steel fully heat-treated. Ideal for use with cold chisels, punches, rivets and for the shaping of metal. With fine grain, forged steel...

With fine grain, forged steel head, hardened and tempered with polished faces. • Shaft Length 310mm• Head Weight 1lb• Shaft...

With textured slip resistant rubber grip. Dampens the impact transmitted through to the user's hand and wrist. • Shaft Length 275mm• Head Weight 1lb• Shaft...

PBB100Single man operated pneumatic bleeder which simplifies the bleeding of hydraulic fluid in vehicle clutches and brake systems, also used for the collection of other non-corrosive fluid spillage...

Chemical and oil resistant polyethylene liquid measures.Graduations:1/4 ltr - 10ml,1/2 ltr - 10ml,1ltr - 10ml,2ltr - 20ml,3ltr - 50ml,5ltr - 100ml...

WIG1\nPneumatic tool for spraying and injecting wax underseal into areas that are difficult to access, such as door cavities, inside box section chassis and around wheel arches. Has a 1 litre...

hemical and oil-resistant polyethylene liquid measures. Integral dispensing spout resistant to extreme weather conditions. Can be used in conjunction with dispensing spouts listed below...

A robust measuring tool manufactured from hard rolled brass with permanent black figures and graduations.Flexible and rustless, it has a 19mm wide blade and countersunk fixing holes. • MFR...

Manufactured to BS EN ISO 3650.Available in two grades:Grade 2: For workshop use.Grade 1: For inspection use.Many intermediate sizes to .001mm increments are also available from stock.Inch sizes...

Manufactured to BS EN ISO 3650.Available in two grades:Grade 2: For workshop use.Grade 1: For inspection use.Many intermediate sizes to .001mm increments are also available from stock.Inch sizes...

Short Series - MetricKennedy KC3 throwaway 3* flute endmills are manufactured HSS-Co 5% making them much tougher than HSS. This means that Kennedy endmills can be used at higher speeds and feeds...

Morse Taper Drive to Threaded MountPrecision machined, fully hardened and ground to give maximum surface contact. • Length 92mm• Weight 100g• Product...

Morse Taper Drive to Threaded MountPrecision machined, fully hardened and ground to give maximum surface contact. • Length 95mm• Weight 80g• Product...

Morse Taper Drive to Jacobs TaperPrecision machined, fully hardened and ground to give maximum surface contact. • Length 90m• Weight 70g• Product Type Drill...

Morse Taper Drive to Jacobs TaperPrecision machined, fully hardened and ground to give maximum surface contact. • Length 95m• Weight 80g• Product Type Drill...

Morse Taper Drive to Jacobs TaperPrecision machined, fully hardened and ground to give maximum surface contact. • Length 95m• Weight 90g• Product Type Drill...

Morse Taper Drive to Jacobs TaperPrecision machined, fully hardened and ground to give maximum surface contact. • Length 95m• Weight 100g• Product Type Drill...

With two magnetic faces and large vee. Medium duty special clamp with fine adjustment.Mounts: 1/4" I/D lug, dovetail stem/spigotdiameter: 5/16".Base dimensions: 60 x 50 x 55mm.Column height x...

With two magnetic faces and large vee. Heavy duty with universal clamp and fine adjustment.Mounts: 1/4" I/D lug, stem/spigot diameter: 4mm, 8mm, 3/8" without bush.Base dimensions: 60 x 50 x 55mm...

Large stand with two powerful magnetic faces producing a magnetic pull of 80kg.Positive switching, fully adjustable joints and slotted 'V' groove for versatility. • MFR Part No...

Compact in design, this stand still has a magnetic pull of 30kg with positive switching, fully adjustable joints and slotted 'V' groove. • MFR Part No. NH-HP• Additional...

With two magnetic faces and large vee. Heavy duty with universal clamp.Mounts: 1/4" I/D lug, stem/spigot diameter: 1/4" and 1/8".Column height x dia.:175 x 12mm.Crossbar length x dia.: 165 x 10mm...

Spark Resistant ScrewdriverPozidriveAluminium Bronze**Image for illustration purpose only • Material Aluminium Bronze• Blade Length 50mm• Tip Size No...

AFManufactured from chrome vanadium steel with a chrome satin finish body and highly polished heads. 15 open jaw angle to shank and ring end offset.Chrome plated finish to pevent from corosion.Ring...

Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn...

Bi-hexagon. (12 point). This range of 1" (25mm) series sockets is the ultimate for high torque hand applications. The Bi-hexagon design gives strength and reliability under heavy loads. Used...

Af A Heavy Duty Range Designed To Cope With The Demands Of Industrial Agricultural Machinery And Heavy Plant, Static Or Mobile. All Kennedy Professional Sockets Have A Unique Double Knurl To Give A...

Made from high density hardwood. Delivers the necessary blow to shape sheet metal and still made to the exacting standards. • Overall Length 300mm• Weight...

StandardManufactured from high quality chrome vanadium with a fully polished finish. All with knurled ‘finger grip’. • Additional Features Knurled 'finger...

Manufactured from drop forged steel ribbed anti-twist frame suited to fabrication and welding applications, etc. • Type G-clamp• Opening Capacity 50mm• Throat...

Manufactured from drop forged ribbed anti-twist frame steel suited to fabrication and welding applications, etc. Resistant to rusting and weld spatter. • Body...

Manufactured from drop forged ribbed anti-twist frame steel suited to fabrication and other heavy applications, etc. • Type G-clamp• Opening...

Specialist clamp manufactured from drop forged steel, with extra throat depth for clamping workpieces further in from the edges, allowing a greater range of applications...

Plastic handles. Chrome plated lapped and pressed ferrules. Pure bristles vulcanised in rubber. Designed to give excellent results at an affordable price. For DIY and trade use. • Brush...

Laminating brush for fibreglass and resin projects. White bristle, stainless ferrule. Cream plastic handle. • Brush Width 2in.• Bristle Shape Flat

All steel drop forged solid construction for long life with knurled handles for extra grip.Designed to hold a range of different sizes of round split-adjustable dies. The three screw design easily...

High quality lacquered wood handles. Chrome plated lapped and pressed ferrules. Long pure black high quality bristles. Hard wearing brushes designed to give long life and the finest of finishes for...