KENNEDY PROFESSIONAL

Club (or lump) hammers are fully forged and heat treated with flat face and chamfered edge for use with cold chisels, brick bolsters, star drills and masonry nails.Hickory ShaftWith fine grain,...

Ball Pein HammersFor use with cold chisels, punches, rivets and for shaping metal. Fine grain hardwood shaft.Spark-resistant tools are used to eliminate the chances of accidental fires or explosions...

1” Drive Inch Size, Standard Length, 6-PointConform to: SAE, USA Federal Standard GGG-W-660A.Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser...

Forged and hardened steel. Flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners. To DIN 133. • Standards Met DIN 133• Overall...

Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn...

Bi-hexagon. (12 point). This range of 1" (25mm) series sockets is the ultimate for high torque hand applications. The Bi-hexagon design gives strength and reliability under heavy loads. Used...

Forged and hardened steel. Flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners. To DIN 133. • Standards Met DIN 133• Overall...

Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn...

Forged and hardened steel. Flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners. To DIN 133. • Standards Met DIN 133• Overall...

HSS-Co Heavy Duty Straight Shank Jobber DrillsMetricHeavy duty drill made of 5% cobalt material with excellent heat resistance. To drill steels with tensile strength up to 1,400 N/mm², very hard...

Bi-hexagon. (12 point). This range of 1" (25mm) series sockets is the ultimate for high torque hand applications. The Bi-hexagon design gives strength and reliability under heavy loads. Used...

Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn...

Bi-hexagon. (12 point). This range of 1" (25mm) series sockets is the ultimate for high torque hand applications. The Bi-hexagon design gives strength and reliability under heavy loads. Used...

HSS-Co Heavy Duty Straight Shank Jobber DrillsMetricHeavy duty drill made of 5% cobalt material with excellent heat resistance. To drill steels with tensile strength up to 1,400 N/mm², very hard...

Interchangeable tips for use with Kennedy butane soldering tools.50BW - To Suit BS050 Soldering Iron75BW - To Suit BS075 Soldering Iron125BW - To Suit BS125 Soldering Iron • Length 2...

Double Flat Soldering Iron Tips (Chisel Tip) to suit 50BW Sildering Iron • For Use With BSO50 Soldering Iron• Length 2.4mm• Tip Size 2.4• MFR...

Interchangeable tips for use with Kennedy butane soldering tools.50BW - To Suit BS050 Soldering Iron75BW - To Suit BS075 Soldering Iron125BW - To Suit BS125 Soldering Iron • Length 2...

ParallelHave nickel chrome molybdenum steel blades, hardened and tempered. Chrome plated, with swivel tops which resist oil and acid. Supplied in plastic cases. Ideal for jewellers and watchmakers...

Expert quality, hardened and tempered chrome alloy steel blades. Fitted ­with a unique dual grip handle with revolving top designed for added user comfort whilst allowing more torque to be...

Expert quality, hardened and tempered chrome alloy steel blades. Fitted ­with a unique dual grip handle with revolving top designed for added user comfort whilst allowing more torque to be...

Ductile steel body with a knurled locking nut ensuring no loss of grip during use. • T-Handle Adjustability Sliding Handle• Tap Wrench Type Straight-handle...

QLT4502.5 tonne capacity. Made of a lightweight aluminium and steel construction. Its low profile makes it ideal for any type of car, including sports and race cars, and its swivel castor wheels...

Forged and hardened steel. Flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners. To DIN 133. • Standards Met DIN 133• Overall...

Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn...

Bi-hexagon. (12 point). This range of 1" (25mm) series sockets is the ultimate for high torque hand applications. The Bi-hexagon design gives strength and reliability under heavy loads. Used...

Manufactured to BS EN ISO 3650.Available in two grades:Grade 2: For workshop use.Grade 1: For inspection use.Many intermediate sizes to .001mm increments are also available from stock.Inch sizes...

Manufactured to BS EN ISO 3650.Available in two grades:Grade 2: For workshop use.Grade 1: For inspection use.Many intermediate sizes to .001mm increments are also available from stock.Inch sizes...

Cast iron welding electrode with an Iron-Nickel alloy core and a graphite coating producing a weld seam that has excellent machinability that is crack resistant.Features and Benefits:■ Operates with...

Pins to suit KEN5811300K range includes:2.5mm & 4mm6mm & 8mm3mm & 5mm7mm & 9mmPins are supplied in pairs. Wrench supplied seperately. • Number of...

Positive Indent (Standard)Drawn carbon steel nickel-plated hand stamps with chamfered edges to prevent accidental damage to workpiece. • Finish/Coating Nickel Plated• Set...

Positive Indent (Standard)Drawn carbon steel nickel-plated hand stamps with chamfered edges to prevent accidental damage to workpiece. • Finish/Coating Nickel Plated• Set...

2 Flute: Regular Series - Metric For Optimum Performance And Maximum Swarf Removal When Plunging, Slotting And Routing In Light Alloys, Brass, Aluminium, Non-Ferrous And Other Soft Materials...

Chrome vanadium steel with a nickel plating. Manufactured to ISO2936 (formerly DIN 911L). Supplied in an indexed plastic holder. • Short Arm Length 18mm• Handle...

MetricCan be used at angles of up to 25° from the screw head, making them ideal for awkward access areas. Manufactured from hardened carbon steel, available with fluted driver handles, L-wrench...

Manufactured from chrome vanadium steel with a nickel plating. Manufactured to ISO2936 (formerly DIN 911L). Set supplied in an indexed plastic holder. Individual hexagon key slots help to instantly...

MetricManufactured from fully hardened carbon steel in accordance with DIN 911. A quality ductile key with precision cut ends and accurate AF dimensional to ensure maximum socket contact. Ball end...

Metric - Standard LengthManufactured from fully hardened carbon steel in accordance with DIN 911 ensuring a quality ductile key with precision square cut ends and accurate AF dimensions to ensure...

Ball Nose - Metric\nLong Series - Metric\n \nSuitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick...

Long Series\nSuitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change.

Metric - Long ArmManufactured from fully hardened carbon steel in accordance with DIN 911 ensuring a quality ductile key with precision square cut ends and accurate AF dimensions to ensure full...

MetricManufactured from fully hardened carbon steel. Ergonomically designed handle to provide high grip and torque with user comfort.   • Tip Material Steel • Number of...

Manufactured from hardened carbon steel with a dual material 'T' handle grip for comfort and extra force. The ball drivers can be used at angles of up to 30° for use where access is restricted...

Long Series

Long Series

HexagonAll Kennedy screwdriver bits have a hardness of 58 - 62HRC. High alloy chrome molybdenum steel for use on hand and power tools. • Tip Size 2.5• Bit...

MetricManufactured from fully hardened carbon steel. Ergonomically designed handle to provide high grip and torque with user comfort. • Handle Material Chrome Vanadium...

A fully insulated screwdriver VDE tested up to 1000V. Professional high grip handles, magnetic tips, chrome vanadium steel blades.Parallel TipSlotted head screws are the most commonly used screw. To...

Volt-tested' to ensure safety on or near electrical equipment up to 1000V AC or 1500V DC. Insulated blades with magnetic tips. Conform with DIN 7438 and DIN EN 60900.Parallel TipSlotted head screws...

Forged and hardened steel. Flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners. To DIN 133. • Standards Met DIN 133• Overall...

Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn...

Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn...

Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn...

Ideal for accurately measuring internal and external thread forms. Manufactured from hardened and polished steel, the blades are precision milled for optimum accuracy.Enclosed in a steel case.Range...

Kennedy Brazed Tip Turning & Boring Tools are manufactured in three standard grades. (All sizes are nominal). Manufactured to ISO DIN BHMA Standards.P40: Roughing to heavy roughing of steel and...

Rectangular - MetricHigh grade mild steel Self colour. Available in square or rectangular sections. Metric manufactured from: BS4235 Part 1 1972 grade steel equivalent to DIN 6885.Length: 300mm.Other...

RatchetingHeat-treated steel circlip pliers for large equipment repair. Replaceable tips and spring ratchet locking mechanism to securely hold against snap ring tension. Black powder coated...

To suit Kennedy Heavy Duty Snap Ring Pliers (165mm-300mm) • Minimum Circlip Capacity 165mm• Type Circlip Plier• Overall Length 510mm• Maximum...

RatchetingHeat-treated steel circlip pliers for large equipment repair. Replaceable tips and spring ratchet locking mechanism to securely hold against snap ring tension. Black powder coated...

Heavy gauge steel, all welded construction. Durable and corrosion resistant two-part epoxy powder paint finish. With quick release lid clasps, padlock hasps and textured carry handles. Full width...

RatchetingHeat-treated steel circlip pliers for large equipment repair. Replaceable tips and spring ratchet locking mechanism to securely hold against snap ring tension. Black powder coated...

RatchetingHeat-treated steel circlip pliers for large equipment repair. Replaceable tips and spring ratchet locking mechanism to securely hold against snap ring tension. Black powder coated...

To suit Kennedy Heavy Duty Snap Ring Pliers (165mm-300mm) • Minimum Circlip Capacity 165mm• Type Circlip Plier• Overall Length 510mm• Maximum...

For use with Kennedy grease guns, flexible hoses improve access in confined spaces, 1/8" BSP connecting threads. • Hydraulic Tool...

For use with Kennedy grease guns, flexible hoses improve access in confined spaces, 1/8" BSP connecting threads. • Hydraulic Tool...

Recommended for cutting thin cross-sections such as tubing, small bars and light angle iron. Because blades are relatively thin they should be used only on light machines.Power Saw Hacksaw Blade...

Soft traditional yellow duster. 100% natural cotton with sewn edges.Features and Benefits• Soft absorbent cotton dusting towel ideal for...

Traditional plain cotton tea towel for general-purpose use.Features and Benefits• Soft absorbent cotton towel ideal for wiping up spills and...

Cuts wall pipe (welded and seamless) up to 5mm thick. The grip action eliminates hand gripping effort to ensure perfect tracking. • Compatible Pipe Material Wall...

Manufactured from M35 HSS and used for the deburring and chamfering of most metals and plastics. Straight shank. Manufactured to BS 328 : Part 5 : 1983. Inclusive angle 90°. • Standards...

20-Tonne 407Mm Maximim Heightbottle Jack

Tungsten carbide tipped SDS masonry drills are suitable for all SDS direct fitting hammer drills. High performance drill bits that withstand extreme heat generation ensuring maximum performance...

Tungsten carbide tipped SDS masonry drills are suitable for all SDS direct fitting hammer drills. High performance drill bits that withstand extreme heat generation ensuring maximum performance...

Tungsten carbide tipped SDS masonry drills are suitable for all SDS direct fitting hammer drills. High performance drill bits that withstand extreme heat generation ensuring maximum performance...

3 Flute: Regular Series - Metric Centre Cutting As Standard. Offer A Combination Of Advantages Achieved With Two And Four Flutes Giving Profile And Peripheral Milling Capability In Addition To...

4 Flute: Regular Series - Metric Centre Cutting As Standard. For Maximum Strength When Milling Harder Materials Where Rapid Swarf Removal Is Not Needed. 4 Flute Milling Cutters Have One Of The...

North polarity in centre separated from opposing pole by a continuous slot. Ideally suited for gripping applications. Supplied with M5 x 1 threaded bore fixing hole and keeper.*M3 x 0...

Kennedy Brazed Tip Turning & Boring Tools are manufactured in three standard grades. (All sizes are nominal). Manufactured to ISO DIN BHMA Standards.K20: General-purpose tools for most...

Kennedy Brazed Tip Turning & Boring Tools are manufactured in three standard grades. (All sizes are nominal). Manufactured to ISO DIN BHMA Standards.P30: Carbide tipped tools are suitable for...

Kennedy Brazed Tip Turning & Boring Tools are manufactured in three standard grades. (All sizes are nominal). Manufactured to ISO DIN BHMA Standards.P40: Roughing to heavy roughing of steel and...

Polypropylene tow rope. Zinc plated steel safety hook. Looped one end. Length: 3.6m.   • MFR Part No. 3124031 • Length 3.6 • Product Type Tow...

10-Piece Numbered Sets 0 - 9Stencils manufactured from hard-wearing quality steel with precision cut letters for a clean sharp image. Suitable for use with all paints and marking compounds for...

26-Piece Letter Sets A - ZStencils manufactured from hard-wearing quality steel with precision cut letters for a clean sharp image. Suitable for use with all paints and marking compounds for marking...

These premium quality bench vices are as good as you get. Made from solid steel with replaceable jaws, integral pipe jaws and anvil for versatility. Available in 100mm (4") and 150mm (6")...

Contents: Adjustable Wrench 205mm, Groove Joint 190mm & Combination 180mm • Handle Material PVC• Jaw Material Chrome Vanadium Steel• Number of...

Manufactured from the highest quality castings with precision cut screw mechanisms and precision machined jaws. Suitable for workshop, automotive and engineering use. • Overall...