KENNEDY PROFESSIONAL

Made from steel, bright chrome plated and can be fixed or loose in a toolbox, or fitted to a bench or wall. Can be used with any size square drive socket. • Product Type Socket...

Chrome vanadium. For converting square drive tooling to use hexagon bits. • Drive Size 3/8in.• Material Chrome Vanadium Steel• Overall...

5% Cobalt Square Inch.Cut faster, 'stand up' longer and reduce costs. Square and rectangular toolbits supplied with 15° bevelled ends. Parting-off blades supplied with 2° side taper, 10°...

HSS Round Inch.Cut faster, 'stand up' longer and reduce costs. Square and rectangular toolbits supplied with 15° bevelled ends. Parting-off blades supplied with 2° side taper, 10° bevel...

HSS Round Inch.Cut faster, 'stand up' longer and reduce costs. Square and rectangular toolbits supplied with 15° bevelled ends. Parting-off blades supplied with 2° side taper, 10° bevel...

Square DriveChrome plated with polished steel head and retractable torque setting lever. "Click & Snap" action indicates when the pre-set torque level has been reached. Push through square drive...

Chrome vanadium. Rubber grip, 72 tooth ratchet. With thumb lever for reversing without having to remove the socket or accessory. With quick release. A high quality wrench for the professional user...

Fully chromed all steel handle with thumb lever for reversing without having to remove the socket or accessory.   • Product Type Ratchet Handle • Overall...

Reversible Ratchet HeadPush-Through Square Drive Head • Drive Size 3/8in.• Head Type Reversible Ratchet Head• Compatible Spigot...

Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings. • Overall Length 75mm• Finish/Coating Black...

Chrome vanadium. For using a combination of square drive socketry in the same application.   • Product Type Female/Male Converter • Drive Size 1/2in.

Drive ConverterChrome vanadium. For using a combination of square drive sockets in one application.   • Drive Type Square • Overall Length 27mm • Number...

Square - InchHigh grade mild steel Self colour. Available in square or rectangular sections. Inch manufactured from: BS46 PART 1 1958 grade steel.Length: 12".Other sizes available on request...

InchManufactured from fully hardened carbon steel. Ergonomically designed handle to provide high grip and torque with user comfort.   • Tip Material Steel • Number of...

Manufactured from chrome vanadium steel with a chrome satin finish body and highly polished heads. 15° open jaw angle to shank and ring end offset.Chrome plated finish to pevent from corosion...

Bi-Hexagon Sockets12 point - side drive design gives a higher torque than normal sockets, grip worn nuts and will not round off existing nuts. All have a ball-retaining groove on each face of the...

Bi-Hexagon Sockets12 point – side drive design gives a higher torque than normal sockets, grip worn nuts and will not round off existing nuts. All have a ball-retaining groove on each face of...

Rectangular - InchHigh grade mild steel. Available in square or rectangular sections.Inch manufactured from: BS46 PART 7 1958 grade steel.Length: 12".Other sizes available on request...

Chrome vanadium steel* with a satin finish body and highly polished heads, with a 15° offset.DIN 3110: 1/4" x 5/16" to 1 5/16" x 1 5/8" AF.ASME B107.39: 1 7/16" x 1 5/8" to 1 13/16" x 2" AF.*1...

Made from chrome vanadium steel with a satin finish body and highly polished heads, with double ended closed jaw bi-hexagon offset. Conform to DIN 838.   • Material Chrome...

Conform to ASME B107.4 & ANSI B107.9. Made from high quality chrome vanadium steel. Satin finish body with highly polished heads. Offset ends. The wrench will fit over the pipe to give a positive...

Chrome vanadium steel with a satin finish body and highly polished heads, with a 15° offset.DIN 3110 & BS192:1982.   • Overall Length 220mm • Type Open...

Manufactured from M35 HSS and used for the deburring and chamfering of most metals and plastics. Straight shank. Manufactured to BS328:Part 5:1983.Rose PatternInclusive angle 90°. Overall length:...

Twisted wire handle for hand use.For industrial maintenance, agricultural, workshop, machinery etc. For decarbonising and heavy duty cleaning use of tubes, struts, awkward places etc...

With all steel, hardened and tempered bodies, solid construction, hardened ground jaws and knurled adjustable handles for extra grip. Straight handle design provides greater leverage, especially when...

Heavy DutyWith spring loaded jaws of hardened forged and milled steel. Jaw swivels 180° allowing easy tightening and loosening of basin nuts on both 15mm and 22mm pipes. With sliding tommy bar...

Box section extending shank with spring loaded retainer. Spring loaded jaws of hardened forged and milled steel. Jaw swivels 180° allowing easy tightening and loosening of basin nuts on both 15mm...

Suitable for repairing damaged and worn threads, also ideal for new applications. Ideal for use with alloys and other light materials. Can also be used for converting from metric to inch and vice...

Range includes 1xD, 1.5xD and 2xD lengths (ISO Metric threads). Our quality inserts are now supplied in packs of 10 or 50. Other sizes and lengths are available on request, please ask for further...

Range includes 1xD, 1.5xD and 2xD lengths (ISO Metric threads). Our quality inserts are now supplied in packs of 10 or 50. Other sizes and lengths are available on request, please ask for further...

Range includes 1xD, 1.5xD and 2xD lengths (ISO Metric threads). Our quality inserts are now supplied in packs of 10 or 50. Other sizes and lengths are available on request, please ask for further...

Range includes 1xD, 1.5xD and 2xD lengths (ISO Metric threads). Our quality inserts are now supplied in packs of 10 or 50. Other sizes and lengths are available on request, please ask for further...

Suitable for repairing damaged and worn threads, also ideal for new applications. Ideal for use with alloys and other light materials. Can also be used for converting from metric to inch and vice...

Range includes 1xD, 1.5xD and 2xD lengths (ISO Metric threads). Our quality inserts are now supplied in packs of 10 or 50. Other sizes and lengths are available on request, please ask for further...

Range includes 1xD, 1.5xD and 2xD lengths (ISO Metric threads). Our quality inserts are now supplied in packs of 10 or 50. Other sizes and lengths are available on request, please ask for further...

Range includes 1xD, 1.5xD and 2xD lengths (ISO Metric threads). Our quality inserts are now supplied in packs of 10 or 50. Other sizes and lengths are available on request, please ask for further...

Range includes 1xD, 1.5xD and 2xD lengths (ISO Metric threads). Our quality inserts are now supplied in packs of 10 or 50. Other sizes and lengths are available on request, please ask for further...

With high helix (45), right hand spiral flutes, designed to pull swarf towards the shank of the tap. Most suitable for blind-hole tapping. Manufactured to BS 949 : Part 4 : 199 and ISO 529 : 1975...

Chrome vanadium steel with mirror polish finish, preventing oil and dirt from adhering to the spanner, making for easier cleaning and preventing rust. 72-teeth ratcheting system which needs only...

Manufactured from hardened chrome vanadium steel with a polished mirror finish. Conform to: ANSI B17.6.

5% Cobalt Parting-Off Inch.Cut faster, 'stand up' longer and reduce costs. Square and rectangular toolbits supplied with 15° bevelled ends. Parting-off blades supplied with 2° side taper,...

5% Cobalt Parting-Off Inch.Cut faster, 'stand up' longer and reduce costs. Square and rectangular toolbits supplied with 15° bevelled ends. Parting-off blades supplied with 2° side taper,...

AFManufactured from high quality steel tube. Zinc plated for corrosion resistance, each supplied with tommy bar. • Spanner Size  3/8in. x 7/16in.• Type Box...

For use where access is limited. With a built-in ratchet mechanism to provide speed and a reversible action which can be achieved by depressing the reversing lever or by simply turning the wrench...

For use where access is limited. With a built-in ratchet mechanism to provide speed and a reversible action which can be achieved by depressing the reversing lever or by simply turning the wrench...

InchManufactured from fully hardened carbon steel. Ergonomically designed handle to provide high grip and torque with user comfort. • Handle Material Chrome Vanadium...

Mechanical drop forged, hardened and tempered plated steel. Ideal for releasing seized/damaged nuts • MFR Part No. NS12• Overall Length 85mm• Pressure...

Conform to: ASME B107.4 & ANSI B107.6. Made from chrome vanadium steel with a highly polished mirror finish. Made to American Federal Standards, giving higher torque therefore improved...

Hardened and precision ground. Conform with DIN 6325.Inch: Sizes 1/16” and 1/8” are manufactured from non-hardened silver steel, 3/16” and above are high quality case hardened mild...

FlatAll Kennedy screwdriver bits have a hardness of 58 - 62HRC. High alloy chrome molybdenum steel for use on hand and power tools.   • Tip Size 10.0• Bit...

Hardened and precision ground. Conform with DIN 6325.Inch: Sizes 1/16” and 1/8” are manufactured from non-hardened silver steel, 3/16” and above are high quality case hardened mild...

Hardened and precision ground. Conform with DIN 6325.Inch: Sizes 1/16” and 1/8” are manufactured from non-hardened silver steel, 3/16” and above are high quality case hardened mild...

Hardened and precision ground. Conform with DIN 6325.Inch: Sizes 1/16” and 1/8” are manufactured from non-hardened silver steel, 3/16” and above are high quality case hardened mild...

FlatAll Kennedy screwdriver bits have a hardness of 58 - 62HRC. High alloy chrome molybdenum steel for use on hand and power tools. • Tip Size 10.0• Bit Material Chrome...

Hardened and precision ground. Conform with DIN 6325.Inch: Sizes 1/16” and 1/8” are manufactured from non-hardened silver steel, 3/16” and above are high quality case hardened mild...

Hardened and precision ground. Conform with DIN 6325.Inch: Sizes 1/16” and 1/8” are manufactured from non-hardened silver steel, 3/16” and above are high quality case hardened mild...

Hardened and precision ground. Conform with DIN 6325.Inch: Sizes 1/16” and 1/8” are manufactured from non-hardened silver steel, 3/16” and above are high quality case hardened mild...

Hardened and precision ground. Conform with DIN 6325.Inch: Sizes 1/16” and 1/8” are manufactured from non-hardened silver steel, 3/16” and above are high quality case hardened mild...

Hardened and precision ground. Conform with DIN 6325.Inch: Sizes 1/16” and 1/8” are manufactured from non-hardened silver steel, 3/16” and above are high quality case hardened mild...

Hardened and precision ground. Conform with DIN 6325.Inch: Sizes 1/16” and 1/8” are manufactured from non-hardened silver steel, 3/16” and above are high quality case hardened mild...

Hardened and precision ground. Conform with DIN 6325.Inch: Sizes 1/16” and 1/8” are manufactured from non-hardened silver steel, 3/16” and above are high quality case hardened mild...

Manufactured from hardened and polished steel, the blades are precision milled for optimum accuracy when measuring internal and external radii. Enclosed in a steel case.Size range:34 Blade Metric: 1...

Manufactured from hardened and polished steel, the blades are precision milled for optimum accuracy when measuring internal and external radii. Enclosed in a steel case.Size range:34 Blade Metric: 1...

Ideal for accurately measuring internal and external thread forms. Manufactured from hardened and polished steel, the blades are precision milled for optimum accuracy.Enclosed in a steel case.Range...

Conform to ASME B107.4. & ANSI B107.9M. Made from high quality chrome vanadium steel. Satin finish body with highly polished heads. Offset ends. The wrench will fit over the pipe to give a...

Made from grade A hickory with a waxed finish. Manufactured to BS 3823. • Shaft Length 30mm• Compatible Head Weight 7lb• Shaft...

Drop forged hardened chrome vanadium steel. Ideal for cutting both flat and round section steels. Hardened carbon steel jaws. Tubular steel handles with cushion grip for maximum operator comfort...

Centre CutDrop forged hardened carbon steel suitable for round and flat sections. With adjustable arms and cushion grips. Tubular handles for maximum strength combined with low weight...

Chrome vanadium steel. Specifically designed for use with slotted retaining rings. Conform to DIN 1810A. • Number of Pieces 1• Minimum Jaw...

Manufactured from hardened and tempered stainless steel. The edges are ground parallel to give the square an exact right angle on both the inside and outside of the stock and blade.Squareness...

The curved blade provides greater leverage. Made from square section chrome vanadium with ground points. Impact resistant plastic handles offer a more comfortable and secure grip to make these pry...

Round End - Flexible BladeSpring tempered flexible steel blades. 12mm blade width. With hanging hole.Finest quality spring tempered rustless steel. Satin chrome. Anti-glare finish with permanent...

Round End - Rigid BladeSpring tempered rigid steel blades. 150mm/6” = 19mm blade width. Other lengths = 25mm blade width. With hanging hole.Finest quality spring tempered stainless steel. Satin...

Suitable for use in confined spaces. Manufactured from forged carbon heat treated steel with ground points. These traditional designs are ideal for use by tradesmen in any industrial environment...

Adjustable WrenchesSmooth jaw adjustment with self-locking design which prevents the jaws opening unintentionally under load.Spark-resistant tools are used to eliminate the chances of accidental...

Adjustable WrenchesSmooth jaw adjustment with self-locking design which prevents the jaws opening unintentionally under load.Spark-resistant tools are used to eliminate the chances of accidental...

Pipe WrenchesSerrated jaws with knurled adjusting nut. Heavy Duty.Spark-resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive...

For general duty usage. Made from square section chrome vanadium with ground points. Impact resistant plastic handles offer a more comfortable and secure grip to make these pry bars user friendly...

Manufactured from high strength 'I' beam section chrome vanadium steel for improved strength and rigidity, the jaws are heat treated for extended tool life. High polished corrosion-resistant finish...

Galvanised steel double arm head. For use with 1” diameter stale with screw hole for fixing. • Roller Length 12.0in.• Roller Core Diameter 25mm• Head...

Round End - Flexible BladeSpring tempered flexible steel blades. 12mm blade width. With hanging hole.Finest quality spring tempered rustless steel. Satin chrome. Anti-glare finish with permanent...

Lightweight aluminium body with powder coat finish. 1 horizontal, 2 plumb vials. Shock absorbing end caps. Milled working faces for precise measurement. Beam structure makes it strong and durable...

For double arm rollers. Medium pile, suitable for rough surfaces such as stucco, concrete, pebble dash, embossed wallpaper, brick and block walls. To fit KENNEDY 300mm wide double arm roller head...

The rigid drain off area helps remove the excess paint from the roller preventing drips and evenly coating your paint roller. • Type Paint Tray• For Use With 12 Inch...

Manufactured from high strength 'I' beam section phosphate vanadium steel for improved strength and rigidity, the jaws are heat treated for extended tool life. High polished corrosion-resistant...