KENNEDY PROFESSIONAL

Chrome vanadium clamping rollers grip worn or rounded fixings by compressing onto the fixing as the socket is turned, applying pressure to grip, turn and remove. Unscrews left and right hand threads...

Recommended for simple, low cost removal of broken screws, bolts etc, without damaging the threads of the component.4 Piece Sizes: No. 2, 3, 4 and 5.6 Piece Sizes: No. 1, 2, 3, 4, 5 and 6...

The benefits of having properly organised tool storage and control include:• The red underlay gives instant recognition of a missing tool and the top layer of foam is durable for industrial use...

The benefits of having properly organised tool storage and control include:• The red underlay gives instant recognition of a missing tool and the top layer of foam is durable for industrial use...

The benefits of having properly organised tool storage and control include:• The red underlay gives instant recognition of a missing tool and the top layer of foam is durable for industrial use...

The dual material grip handle design allows the user to apply the greatest force with the minimum amount of effort. Manufactured with a polypropylene core for strength and durability with a soft...

The dual material grip handle design allows the user to apply the greatest force with the minimum amount of effort. Manufactured with a polypropylene core for strength and durability with a soft...

Especially suitable for production line environments where repetitive work is undertaken. Double polished head and joint with induction hardened cutting edges. EN60900:2012 standard for Safe...

Especially suitable for production line environments where repetitive work is undertaken. Double polished head and joint with induction hardened cutting edges. EN60900:2012 standard for Safe...

Volt-tested' to ensure safety on or near electrical equipment up to 1000V AC or 1500V DC. Insulated blades with magnetic tips. Conform with DIN 7438 and DIN EN 60900.Parallel TipSlotted head screws...

Spark Resistant Eng. ScrewdriverSlottedAluminium Bronze**Image for illustration purpose only • Material Aluminium Bronze• Blade Length 100mm• Tip...

Extractable dowel pins complete with inner thread and slight flats for air release. DIN 7979D. EN 28735. ISO 8735. Material: AISI-52100 or DIN 1-3505 100 Cr 6. Hardness: 57-63 HRC...

Extractable dowel pins complete with inner thread and slight flats for air release. DIN 7979D. EN 28735. ISO 8735. Material: AISI-52100 or DIN 1-3505 100 Cr 6. Hardness: 57-63 HRC...

Hardened and precision ground. Conform with DIN 6325.Metric: Sizes 3mm are manufactured from non-hardened silver steel, 4mm and above are high quality through hardened mild steel.Tolerances:3mm = +0...

Extractable dowel pins complete with inner thread and slight flats for air release. DIN 7979D. EN 28735. ISO 8735. Material: AISI-52100 or DIN 1-3505 100 Cr 6. Hardness: 57-63 HRC...

Ball ShapeAll sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank.Cut Numbers:Cut 3 - Rapid CutFor use on softer non-ferrous and plastic materials, i.e. aluminium, fibreglass,...

Spark Resistant Eng. ScrewdriverSlottedAluminium Bronze**Image for illustration purpose only • Material Aluminium Bronze• Blade Length 75mm• Tip...

Chemical And Oil Resistant Polyethylene Liquid Measures. Graduations: 1/4 Ltr - 10Ml, 1/2 Ltr - 10Ml, 1Ltr - 10Ml, 2Ltr - 20Ml, 3Ltr - 50Ml, 5Ltr - 100Ml.

Chemical And Oil-Resistant Polyethylene Liquid Measures. Integral Dispensing Spout Resistant To Extreme Weather Conditions. Can Be Used In Conjunction With Dispensing Spouts Listed Below...

CrosspointSpark-resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive environments. They resist the sparks that a standard tool...

Allows profiles to be traced quickly and easily. • Overall Length 128mm• Includes 100mm Low Friction Plastic Blades• Type Contour Gauge• Pack...

StandardManufactured from high quality chrome vanadium with a fully polished finish.All with knurled ‘finger grip’. • Number of Pieces 1• Overall...

StandardManufactured from high quality chrome vanadium with a fully polished finish. All with knurled ‘finger grip’. • Product Type Extension Bar• Overall...

Body Repair Kit Spares to suit Kennedy Hydraulic Body Repair Kits • MFR Part No. B0005• Product Type Extension Tube• Description Small Extension Tube...

Adjustable PointManufactured from high quality steel, with a polished finish. Consisting of two legs which are held together by a large nut and screw to provide a firm friction joint. Each firm joint...

Plastic HandledHandy, economical lightweight plastic snips with finger hole for stability. Useful for cutting threads, wires, string, plastic pull straps etc. • End...

WobbleIn areas where clearance may be a problem the ‘wobble’ square drive can be used at an angle of up to 15°.Manufactured from high quality chrome vanadium with a fully polished...

Curved JawSpecially designed to grip circular objects. Ideal for plumbing and general pipe work.Rolled chrome vanadium steel bodies, drop forged hardened steel jaws with corrosion-resistant bright...

Straight Jaw Specially designed to grip circular objects. Ideal for plumbing and general pipe work.Rolled chrome vanadium steel bodies, drop forged hardened steel jaws with corrosion-resistant bright...

Rugged construction with a heavy duty return spring. Chrome plated piston inhibits rusting. 1/4 NPT thread size. Accessories easily snap on. For use with Porta Power/Body Dozer power units...

Manufactured from M35 HSS and used for the deburring and chamfering of most metals and plastics. Straight shank. Manufactured to BS 328 : Part 5 : 1983. Inclusive angle 90°. • Standards...

5-64mm (1/4"-2.1/2") Tube Cutter

Ideal for assembly and servicing of small precision mechanisms associated with electrical, electronic, ignition and refrigeration work. All bi-hexagon unless stated.Double knurl feature gives a high...

With compound action and self-opening jaws, this 5-blade pipe crimper provides accurate indentations in round duct and stove pipe. It has soft grip handles for comfort and rust resistant blades...

5 DrawerOver 25% deeper than standard size tool chests for extra storage.Manufactured from heavy gauge steel, electro-coated enamel finish for superior appearance and protection. Steel panels in the...

A quality range of precision screwdrivers. Combination tool and driver sets have carbon steel blades (tweezers are stainless steel). Driver only sets have nickel chrome molybdenum alloy steel blades...

A quality range of precision nut drivers.Combination tool and driver sets have carbon steel blades.All with attractive chromed handles.5-Piece Nut Driver Set (-9888K)Contents: Hexagon: 3.0, 3.5, 4.0,...

Leather, made with five pockets and one loop. Belt not included. • Length 280mm• Number of Pockets 5• Size 280mm x 280mm• Type Belt...

Manufactured from leather with a fully riveted double stitched construction. Chrome leather, five pockets and one loop. Belt not included.   • Length 250mm • Number of...

Leather, made with five pockets, two loops, webbing belt and tape holder. • Length 210mm• Number of Pockets 5• Size 220mm x...

Constructed from heavy gauge steel for heavy-duty use with a large diameter saddle for a secure hold under the jacking point. Extra long handle for easy access under bigger vehicles which also tilts...

Tungsten carbide tipped SDS masonry drills are suitable for all SDS direct fitting hammer drills. High performance drill bits that withstand extreme heat generation ensuring maximum performance...

Tungsten carbide tipped SDS masonry drills are suitable for all SDS direct fitting hammer drills. High performance drill bits that withstand extreme heat generation ensuring maximum performance...

Fork Connector TerminalsPack quantity: 100.Durable low cost copper or brass connectors. Manufactured as single piece connectors. Electro tinned to protect from corrosion. Insulated with flared entry,...

Fork Connector TerminalsPack quantity: 100.Durable low cost copper or brass connectors. Manufactured as single piece connectors. Electro tinned to protect from corrosion. Insulated with flared entry,...

Fork Connector TerminalsPack quantity: 100.Durable low cost copper or brass connectors. Manufactured as single piece connectors. Electro tinned to protect from corrosion. Insulated with flared entry,...

Manufactured to BS EN ISO 3650.Available in two grades:Grade 2: For workshop use.Grade 1: For inspection use.Many intermediate sizes to .001mm increments are also available from stock.Inch sizes...

Fork Connector TerminalsPack quantity: 100.Durable low cost copper or brass connectors. Manufactured as single piece connectors. Electro tinned to protect from corrosion. Insulated with flared entry,...

Female Socket Connector TerminalsPack quantity: 100.Durable low cost copper or brass connectors. Manufactured as single piece connectors. Electro tinned to protect from corrosion. Insulated with...

Fork Connector TerminalsPack quantity: 100.Durable low cost copper or brass connectors. Manufactured as single piece connectors. Electro tinned to protect from corrosion. Insulated with flared entry,...

Fork Connector TerminalsPack quantity: 100.Durable low cost copper or brass connectors. Manufactured as single piece connectors. Electro tinned to protect from corrosion. Insulated with flared entry,...

Positive Indent (Standard)\nDrawn carbon steel nickel-plated hand stamps with chamfered edges to prevent accidental damage to workpiece.

Positive Indent (Standard)\nDrawn carbon steel nickel-plated hand stamps with chamfered edges to prevent accidental damage to workpiece.

Long Series - 2 Flute - MetricFor optimum performance and maximum swarf removal when plunging, slotting and routing in light alloys, brass, aluminium, non ferrous and other soft materials...

2 Flute: Regular Series - Metric For Optimum Performance And Maximum Swarf Removal When Plunging, Slotting And Routing In Light Alloys, Brass, Aluminium, Non-Ferrous And Other Soft Materials...

Long Series - 3 Flute - MetricFor optimum performance and maximum swarf removal when plunging, slotting and routing in light alloys, brass, aluminium, non ferrous and other soft materials...

3 Flute: Regular Series - Metric Centre Cutting As Standard. Offer A Combination Of Advantages Achieved With Two And Four Flutes Giving Profile And Peripheral Milling Capability In Addition To...

Long Series - 4 Flute - MetricFor optimum performance and maximum swarf removal when plunging, slotting and routing in light alloys, brass, aluminium, non ferrous and other soft materials...

Chrome vanadium steel with a nickel plating. Manufactured to ISO2936 (formerly DIN 911L). Supplied in an indexed plastic holder. • Short Arm Length 28mm• Handle...

MetricCan be used at angles of up to 25° from the screw head, making them ideal for awkward access areas. Manufactured from hardened carbon steel, available with fluted driver handles, L-wrench...

Manufactured from chrome vanadium steel with a nickel plating. Manufactured to ISO2936 (formerly DIN 911L). Set supplied in an indexed plastic holder. Individual hexagon key slots help to instantly...

MetricManufactured from fully hardened carbon steel in accordance with DIN 911. A quality ductile key with precision cut ends and accurate AF dimensional to ensure maximum socket contact. Ball end...

Metric - Standard LengthManufactured from fully hardened carbon steel in accordance with DIN 911 ensuring a quality ductile key with precision square cut ends and accurate AF dimensions to ensure...

Metric - Long ArmManufactured from fully hardened carbon steel in accordance with DIN 911 ensuring a quality ductile key with precision square cut ends and accurate AF dimensions to ensure full...

MetricManufactured from fully hardened carbon steel. Ergonomically designed handle to provide high grip and torque with user comfort.   • Tip Material Steel • Number of...

Manufactured from hardened carbon steel with a dual material 'T' handle grip for comfort and extra force. The ball drivers can be used at angles of up to 30° for use where access is restricted...

Short Series - Metric - TiCN CoatedKennedy KC3 throwaway 3* flute endmills are manufactured HSS-Co 5% making them much tougher than HSS. This means that Kennedy endmills can be used at higher speeds...

Long Series

TiN-Coated to allow elevated cutting speeds and help to extend tool life.\n\nShort Series\n\nLong Series

Long Series

Flat1/4" Hex with ball recess.   • Bit Material Chrome Molybdenum Steel• For Use With Power Tools• Bit Type Slotted• Tip Size 5...

Flat1/4" Hex with ball recess. • Bit Material Chrome Molybdenum Steel• For Use With Power Tools• Bit Type Slotted• Tip Size 5...

MetricManufactured from fully hardened carbon steel. Ergonomically designed handle to provide high grip and torque with user comfort. • Handle Material Chrome Vanadium...

Bi-Material comfort handle. Slimline scissors ideal for fine and intricate detailed work. • End Shape Pointed• Blade Material Stainless Steel• Hand...

HSS-Co Heavy Duty Straight Shank Jobber DrillsMetricHeavy duty drill made of 5% cobalt material with excellent heat resistance. To drill steels with tensile strength up to 1,400 N/mm², very hard...

Tungsten carbide tipped SDS masonry drills are suitable for all SDS direct fitting hammer drills. High performance drill bits that withstand extreme heat generation ensuring maximum performance...

Tungsten carbide tipped SDS masonry drills are suitable for all SDS direct fitting hammer drills. High performance drill bits that withstand extreme heat generation ensuring maximum performance...

Manufactured to BS EN ISO 3650.Available in two grades:Grade 2: For workshop use.Grade 1: For inspection use.Many intermediate sizes to .001mm increments are also available from stock.Inch sizes...

Manufactured from Chrome Vanadium steel with a chrome satin finish body and highly polished heads. 15° open jaw angle to shank and ring end offset.Chrome plated finish to pevent from corosion...

Ideal for assembly and servicing of small precision mechanisms associated with electrical, electronic, ignition and refrigeration work. All bi-hexagon unless stated.Double knurl feature gives a high...

Designed to give access into otherwise restricted areas. A versatile tool suitable for use in many applications.   • Handle Length 95mm • Blade...

Long Series\nSuitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change.