Cutting Tools

1 each, taper, second and plug lead.IS0 529.(1) Diameter and pitch not mentioned in ISO. • Tap Type Straight Flute• Thread Standard Metric Coarse• Finish/Coating Bright• Thread Length 36mm

Used to produce a close tolerance surface finish by enlarging pre-drilled holes to a finished size. Manufactured from HSS with a 45 bevelled head. Manufactured to BS 328-4.\n\nTolerances (to H7)\nDiameter: ~ up to 3.. Tolerance: +.8, -.7.\nDiameter: Over...

The European version of machine reamers ideally suited for use on high performance CNC machines. They are also available, to special order, with a higher cobalt content or made from solid carbide for the machining of tougher more exotic materials...

Long Series E430T.Used for profile milling and producing open slots. Bright finish. Flute type: 30° helix. Manufactured to BS 122 : Part 4 : 1980.Metric Tolerances:Diameter: up to 38.00. Tolerance: +0.0630, -0.0130.Diameter: Over 38.00. Tolerance: +0...

Regular Series\nFor optimum performance and maximum swarf removal when plunging, slotting and routing in light alloys, brass, aluminium, non-ferrous and other soft materials. Manufactured to USCTi Standards. Available in 2 flute for maximum swarf...

Countersink Set• 6 Piece Set• Straight shank• Ground flute• 90° angle• Set contains 2-5, 5-10, 10-15, 15-20, 20-25, 25-30mm • Finish/Coating Bright• Number of Pieces 6• Countersink...

Sherwood machine reamers are used to produce a close tolerance surface finish by enlarging pre-drilled holes to a finished size. Manufactured from HSS with a 45 bevelled head. Conform to BS 122 : Part 2 and BS 328 Part 4.\n\nInch Tolerances\nDiameter: ~...

Long Series E430T.Used for profile milling and producing open slots. Bright finish. Flute type: 30° helix. Manufactured to BS 122 : Part 4 : 1980.Inch Tolerances:Diameter: up to 1/2". Tolerance: +0.0025, 0.0005.Diameter: Over 1/2". Tolerance: +0...

HSS Straight Flute UNC (Unified Coarse) Ground Thread Tap SetSherwood HSS Taps are the general purpose option for thread cutting in most materials including steel, some stainless steels, cast irons and non-ferrous materials such as Aluminium, Brass and...

HSS Ground Thread Straight Flute BSW (British Standard Whitworth) Tap SetSherwood HSS Taps are the general purpose option for thread cutting in most materials including steel, some stainless steels, cast irons and non-ferrous materials such as...

IS0 529 - Straight Flute - Sets of Three.1 each, taper, second and plug lead.Thread Forms are Class 2 medium fit tolerance.Sherwood HSS Taps are the general purpose option for thread cutting in most materials including steel, some stainless steels, cast...

45 piece metric coarse and metric fine combined set of machine ground carbon steel taps and dies. For general workshop and maintenance use only. Supplied in a robust plastic carrying case.Contents:Tap Wrench,'T' Type Tap Wrench,Die Holder,Die...

Solid Carbide Screw Drill SetContents: SD2, SD3, SD4, SD5 and SD6 • Number of Pieces 5• Drill Diameter 2mm• Type SD2• Material Carbide• Minimum Tap Size M3

Cutting edge geometry increases cutting performance and reduces cutting forces producing a solid Slug of material which is ejected when the cutter breaks through and the hole is complete. Cutters are faster, easier and are more accurate than the...

4 Flute: Regular Series - MetricCentre cutting as standard. For maximum strength when milling harder materials where rapid swarf removal is not needed. 4 flute milling cutters have one of the strongest tooth structures available in solid cutters...

4 Flute: Regular Series - Metric Centre Cutting As Standard. For Maximum Strength When Milling Harder Materials Where Rapid Swarf Removal Is Not Needed. 4 Flute Milling Cutters Have One Of The Strongest Tooth Structures Available In Solid Cutters...

3 Flute: Regular Series - Metric Centre Cutting As Standard. Offer A Combination Of Advantages Achieved With Two And Four Flutes Giving Profile And Peripheral Milling Capability In Addition To Slotting And Plunging. Manufactured To Works Standards...

4 Flute: Regular Series - MetricCentre cutting as standard. For maximum strength when milling harder materials where rapid swarf removal is not needed. 4 flute milling cutters have one of the strongest tooth structures available in solid cutters...

Long Series - 4 Flute - MetricFor optimum performance and maximum swarf removal when plunging, slotting and routing in light alloys, brass, aluminium, non ferrous and other soft materials. Manufactured to USCTi Standards.Metric TolerancesDiameter: Over 1...

Straight ShankThe Indexa ER Collet chuck is manufactured as part of Europe's most popular collet system. The collapsing collet design can be used for a range of diameters and maintains concentricity for drilling and milling. Long reach options are also...

95° approach for 80° negative trigon inserts. • Minimum Bore Diameter (D) 48mm• Insert Inscribed Circle 12.7mm• Shank Diameter (d) 40mm• Cutting Height (h1) 18.5mm

90° approach for negative triangular inserts. • Number of Bars in Set N/A• Clearance Angle 0°• Minimum Bore Diameter (D) 39mm• Shank Diameter (d) 32mm

93° approach for 55° negative rhombic inserts. • Number of Bars in Set N/A• Clearance Angle 0°• Minimum Bore Diameter (D) 39mm• Shank Diameter (d) 32mm

95° approach for 80° negative rhombic inserts. • Number of Bars in Set N/A• Clearance Angle 0°• Minimum Bore Diameter (D) 39mm• Shank Diameter (d) 32mm

90° approach for negative triangular inserts. • Number of Bars in Set N/A• Clearance Angle 0°• Minimum Bore Diameter (D) 31mm• Shank Diameter (d) 25mm

95° approach for 80° negative rhombic inserts. • Number of Bars in Set N/A• Clearance Angle 0°• Minimum Bore Diameter (D) 31mm• Shank Diameter (d) 2mm

95° approach for negative 80° Trigon inserts. • Number of Bars in Set N/A• Clearance Angle 0°• Minimum Bore Diameter (D) 23mm• Shank Diameter (d) 20mm

Face Mill Adaptors - FM TypeFrom an extensive programme of quality spindle nose tooling, used with an extensive range of face and shell millsBT = BT-MAS 403DN = DIN69871/AIS = ISO/DIN 2080/QC = ISO/DIN 2080 Quick Change • MFR Part No...

Manufactured from hardened and tempered high alloy steel.All supplied in hard wearing bench cases. Conform to DIN 6499.ER11: Number of collets: 10. Range 1.0 - 7.0mm.ER16: Number of collets: 9. Range 1.0 - 10.0mm.ER20: Number of collets: 11. Range 2.0 -...

Manufactured from hardened and tempered high alloy steel.All supplied in hard wearing bench cases. Conform to DIN 6499.ER11: Number of collets: 10. Range 1.0 - 7.0mm.ER16: Number of collets: 9. Range 1.0 - 10.0mm.ER20: Number of collets: 11. Range 2.0 -...

Manufactured from hardened and tempered high alloy steel.All supplied in hard wearing bench cases. Conform to DIN 6499.ER11: Number of collets: 10. Range 1.0 - 7.0mm.ER16: Number of collets: 9. Range 1.0 - 10.0mm.ER20: Number of collets: 11. Range 2.0 -...

Manufactured from hardened and tempered high alloy steel.All supplied in hard wearing bench cases. Conform to DIN 6499.ER11: Number of collets: 10. Range 1.0 - 7.0mm.ER16: Number of collets: 9. Range 1.0 - 10.0mm.ER20: Number of collets: 11. Range 2.0 -...

Boring Bar Sleeves - E2-1\nManufactured to DIN 6988. Suitable for use in NC lathes with VDI fixing disc. Features: All tools are fully carburised and hardened. Surface hardness of 58 - 6HRC. Tensile strength above 1N/mm2. Surfaces blued; seat, parallel...

Type E2\nManufactured to DIN 6988. Suitable for use in NC lathes with VDI fixing disc. Features: All tools are fully carburized and hardened. Surface hardness of 58-6HRc. Tensile strength above 1N/mm2. Surfaces blued; seat, parallel shank and shoulder...

For use on manual and CNC lathes, this universal style tool block will accurately clamp all parting blades of the corresponding width, 26mm or 32mm. The rigid clamping method allows blades to be set securely for varying depths of cut.Compatible with...

For use on manual and CNC lathes, this universal style tool block will accurately clamp all parting blades of the corresponding width, 26mm or 32mm. The rigid clamping method allows blades to be set securely for varying depths of cut.Compatible with...

For use on manual and CNC lathes, this universal style tool block will accurately clamp all parting blades of the corresponding width, 26mm or 32mm. The rigid clamping method allows blades to be set securely for varying depths of cut.Compatible with...

For use on manual and CNC lathes, this universal style tool block will accurately clamp all parting blades of the corresponding width, 26mm or 32mm. The rigid clamping method allows blades to be set securely for varying depths of cut.Compatible with...

For use on manual and CNC lathes, this universal style tool block will accurately clamp all parting blades of the corresponding width, 26mm or 32mm. The rigid clamping method allows blades to be set securely for varying depths of cut.Compatible with...

Dual DIR - Internal Threading Toolholder • Centre to Cutting Tip 16.2mm• Insert Type Laydown• ISO Designation DIR 0025R 16• Overall Length 200mm• Cutting Direction Right Hand