Cutting Tools

Series J100 - MetricGeneral purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium alloy and graphite. Point angle: 118°, helix angle: normal, web thickness: standard, relief angle: 10° - 20°,...

Series J100 - MetricGeneral purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium alloy and graphite. Point angle: 118°, helix angle: normal, web thickness: standard, relief angle: 10°-20°,...

Regular Series\nFor optimum performance and maximum swarf removal when plunging, slotting and routing in light alloys, brass, aluminium, non-ferrous and other soft materials. Manufactured to USCTi Standards. Available in 2 flute for maximum swarf...

Regular Series\nFor maximum strength when milling harder materials where rapid swarf removal is not needed. Four flute milling cutters have one of the strongest tooth structures available in solid cutters. Centre cutting as standard. Manufactured to ANSI...

Regular Series\nFor optimum performance and maximum swarf removal when plunging, slotting and routing in light alloys, brass, aluminium, non-ferrous and other soft materials. Manufactured to USCTi Standards. Available in 2 flute for maximum swarf...

Regular Series\nFor optimum performance and maximum swarf removal when plunging, slotting and routing in most materials including brass, aluminium, non-ferrous and other soft materials. Manufactured to USCTi Standards.\n\nMetric Tolerances\nDiameter:...

Used to produce a close tolerance surface finish by enlarging pre-drilled holes to a finished size to allow the fitting of hardened and ground taper pins in the building of jigs, fixtures and dies. \nManufactured to BS 328-4

Designed for close tolerance hole location. Suitable for continuous production on aluminium, plastics, free cutting steels, cast iron, titanium and some aerospace materials. The stability of carbide makes the tool more rigid and less likely to deflect,...

Series E100 HSS Straight Shank Extra Length DrillsMetricGeneral-purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium alloy and graphite. Point angle: 118°, helix angle: normal, web thickness: standard,...

Series E100 HSS Straight Shank Extra Length DrillsMetricGeneral-purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium alloy and graphite. Point angle: 118°, helix angle: normal, web thickness: standard,...

Manufactured to DIN 212.Tolerances (to H7)Diameter: ~ up to 5.50. Tolerance: +0.004, -0.000.Diameter: Over 5.50 ~. Tolerance: +0.005, -0.000. • Shank Type Straight• Number of Flutes 6• Cutting Direction Right...

The European version of machine reamers ideally suited for use on high performance CNC machines. They are also available, to special order, with a higher cobalt content or made from solid carbide for the machining of tougher more exotic materials...

Metric.Used to produce a close tolerance surface finish by hand in almost any environment i.e. on site or in a workshop. Manufactured to BS 328 : Part 4 : 1990 and DIN 206B.METRIC TOLERANCES:Diameter: ~ up to 3.00. Tolerance: +0.008, -0.007.Diameter:...

Left hand spiral flute, right hand cutting. Manufactured to BS 328-4.METRIC TOLERANCES (to H7):Diameter: ~ up to 3.00. Tolerance: High +0.008, Low -0.004.Diameter: Over 3.00 ~ up to 6.00. Tolerance: High +0.010, Low -0.005.Diameter: Over 6.00 ~ up to 10...

Series L100 HSS Straight Shank Long Series DrillsMetricGeneral purpose drills which are designed to drill steels with tensile strength up to 1,000N/mm2, cast steel, grey cast iron, malleable cast iron, nickel brass and graphite. Point angle: 118°,...

HSS Straight Shank Stub DrillsBright Finish - MetricGeneral purpose drills for use on automatics and turret lathes. Suitable for drilling steels, cast iron, alloy steel and malleable cast iron. Point angle: 118°, helix angle: normal, web thickness:...

  Series L100 HSS Straight Shank Long Series DrillsBright Finish - MetricGeneral purpose drills to drill steels with tensile strength up to 1,000N/mm2, cast steel, grey cast iron, malleable cast iron, nickel brass and graphite. Point angle:...

Series J102 - MetricGeneral purpose drills for drilling a wide variety of metallic and non-metallic materials.Point angle: 118°. Tolerance of diameter: h7. Tolerance of shank: h6. Supply unit. All diameters - 1 pce.Manufacturing Standard: BS 328, DIN...

HSS 90° Straight Shank Spotting DrillsSeries C520Special drill for accurate and fast spotting on NC machines, jig drills and other capital-intensive boring machines. For countersinking and chamfering of tapping holes in one operation. Only suitable...

HSS 120° Straight Shank Spotting DrillsSeries C530Special drill for accurate and fast spotting on NC machines, jig drills and other capital-intensive boring machines. For countersinking and chamfering of tapping holes in one operation. Only suitable...

BS 1127.For use in diestocks to produce external screw threads. • Thread Standard Metric Coarse• Thread Size M11 X 1.5• Thread Direction Right Hand• Material High Speed Steel

1 each, taper, second and plug lead.IS0 529.(1) Diameter and pitch not mentioned in ISO. • Tap Type Straight Flute• Thread Standard Metric Coarse• Finish/Coating Bright• Thread Length 20mm

Sherwood HSS Taps are the general purpose option for thread cutting in most materials including steel, some stainless steels, cast irons and non-ferrous materials such as Aluminium, Brass and many others.Manufactured with precision ground flutes for...

Sherwood HSS Taps are the general purpose option for thread cutting in most materials including steel, some stainless steels, cast irons and non-ferrous materials such as Aluminium, Brass and many others.Manufactured with precision ground flutes for...

Short Series - Metric.Bright finish. Flute type: 30° helix. Manufactured to BS 122: Part 4: 1980.METRIC TOLERANCES:Diameter: ~ up to 3.00. Tolerance: +0.013 -0.033.Diameter: Over 3.00 ~ up to 6.00. Tolerance:+ 0.020 -0.038.Diameter: Over 6.00 ~ up to...

Regular Series Type E411T.Used for profile milling and producing open slots. Bright finish. Flute type : 30° helix.Manufactured to BS 122 : Part 4 : 1980.Metric Tolerances:Diameter: up to 38.00mm. Tolerance: +0.0630, -0.0130.Diameter: Over 38.00mm...

Short Series S210T - Metric.Used for milling keyways and slots. Bright finish. Flute type: 30° helix. Manufactured to BS 122: Part 4: 1980.METRIC TOLERANCES:Diameter: ~ up to 3.00. Tolerance: +0.013 -0.033.Diameter: Over 3.00 ~ up to 6.00...

Short Series E410T.Used for profile milling and producing open slots. Bright finish. Flute type : 30° helix.Manufactured to BS 122 : Part 4 : 1980.METRIC TOLERANCES:Diameter: up to 38.00mm. Tolerance: +0.0630, -0.0130.Diameter: Over 38.00mm ~...

Long Series 5230T.Used for milling keyways and slots. Bright finish. Flute type: 30° helix. Manufactured to BS 122: Part 4: 1980.METRIC TOLERANCES:Diameter: ~ up to 3.00. Tolerance: +0.013 -0.033;Diameter: Over 3.00 ~ up to 6.00. Tolerance:+ 0.020...

Long Series E430T.Used for profile milling and producing open slots. Bright finish. Flute type: 30° helix. Manufactured to BS 122 : Part 4 : 1980.Metric Tolerances:Diameter: up to 38.00. Tolerance: +0.0630, -0.0130.Diameter: Over 38.00. Tolerance: +0...

For steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium alloy and graphite. \nPoint angle: 118. Helix angle: normal. \nWeb thickness: standard. \nRelief angle: 1-2. \nTolerance of diameter: h8. \nTolerance of shank: f11. To...

Sherwood machine reamers are used to produce a close tolerance surface finish by enlarging pre-drilled holes to a finished size. Manufactured from HSS with a 45 bevelled head. Conform to BS 122 : Part 2 and BS 328 Part 4.\n\nInch Tolerances\nDiameter: ~...

Inch.Used to produce a close tolerance surface finish by hand in almost any environment i.e. on site or in a workshop. Manufactured to BS 328-4 and DIN 206B.INCH TOLERANCES:Diameter: ~ up to 0.1181. Tolerance: +0.0005, -0.0013.Diameter: Over 0.1181 ~ up...

Short Series S210T.Used for milling keyways and slots. Bright finish. Flute type: 30° helix. Manufactured to BS 122: Part 4: 1980.INCH TOLERANCES:Diameter: up to 1/2". Tolerance: +0.0630, -0.0013.Diameter:Over 1/2". Tolerance: +0.1250, -0.0015...

Series S100 HSS Straight Shank Stub Drills - InchGeneral purpose drills for use on automatics and turret lathes. Suitable for drilling steels, cast iron, alloy steel and malleable cast iron.Features• 118° Poiunt angle• Helix angle:...

Series J100Suitable for drilling steel, cast steel, alloyed and unalloyed, grey cast iron, spheroidal iron, sintered powder metal, German silver and graphite. Manufactured to BS 328/DIN338RN.Black Finish (W-Finish)This is the most common surface finish...

For all dimensional specifications please refer to our catalogue.

Short Series S210T.Used for milling keyways and slots. Bright finish. Flute type: 30° helix. Manufactured to BS 122: Part 4: 1980.INCH TOLERANCES:Diameter: up to 1/2". Tolerance: +0.0630, -0.0013.Diameter:Over 1/2". Tolerance: +0.1250, -0.0015...

Short Series E410T.Used for profile milling and producing open slots. Bright finish. Flute type : 30° helix.Manufactured to BS 122 : Part 4 : 1980.INCH TOLERANCES:Diameter: up to 1/2". Tolerance: +0.0025, -0.0005.Diameter: Over 1/2" ~. Tolerance: +0...

Series J1\nSuitable for drilling steel, cast steel, alloyed and unalloyed, grey cast iron, spheroidal iron, sintered powder metal, German silver and graphite. Manufactured to BS 328/DIN338RN.\n\nBlack Finish (W-Finish) \nThis is the most common surface...