Cutting Tools

Tungsten carbide tipped with roll forged flutes. A general purpose mortar and masonry drill bit suitable for workshop and maintenance. Manufactured to DIN 8039. 150mm to 160mm length. • Flute Length 85mm• Shank...

Tungsten carbide tipped with roll forged flutes. A general purpose mortar and masonry drill bit suitable for workshop and maintenance. Manufactured to DIN 8039. 75mm to 120mm length. • Flute Length 75mm• Shank...

Recommended for simple, low cost removal of broken screws, bolts etc, without damaging the threads of the component. • Maximum Screw Capacity 7/32in.• Type Screw Extractor• Minimum Screw Capacity 5/32in...

For use with Mag Base broaching units, Piller Drills, drill presses, lathes etc. • Type Adaptor No.2 Morse Taper

Inch SeriesUsed to produce 60 centres in components for subsequent manufacturing operations to be carried out. Tool life is extended and difficult materials may be drilled. Manufactured to BS328. 60° inclusive angle. 118° drill point...

Bi-Material File Handle.Polypropylene file handles with integral hanging hole and covered with a ribbed rubber grip for increased purchase and added comfort.Available in three sizes: 0, 1 and 2. • Size 2• Handle...

Manufactured from top quality sintered steels. For use on a wide range of applications from roughing to finishing. Manufactured to BS1296:Part 3:1978.Facing • Tip Material HSS• Standards Met BS 1296 Part 3:...

Manufactured from top quality sintered steels. For use on a wide range of applications from roughing to finishing. Manufactured to BS1296:Part 3:1978.Facing • Tip Material HSS• Standards Met BS 1296 Part 3:...

Tungsten carbide tipped with roll forged flutes. A general purpose mortar and masonry drill bit suitable for workshop and maintenance. Manufactured to DIN 8039. 400mm length. • Flute Length 235mm• Shank...

Tungsten carbide tipped with roll forged flutes. A general purpose mortar and masonry drill bit suitable for workshop and maintenance. Manufactured to DIN 8039. 150mm to 160mm length. • Flute Length 85mm• Shank...

Tungsten carbide tipped with roll forged flutes. A general purpose mortar and masonry drill bit suitable for workshop and maintenance. Manufactured to DIN 8039. 75mm to 120mm length. • Flute Length 75mm• Shank...

Manufactured from top quality sintered steels. For use on a wide range of applications from roughing to finishing. Manufactured to BS1296:Part 3:1978.Parting Off • Tip Material HSS• Standards Met BS 1296 Part 3:...

Manufactured from top quality sintered steels. For use on a wide range of applications from roughing to finishing. Manufactured to BS1296:Part 3:1978.Parting Off • Tip Material HSS• Standards Met BS 1296 Part 3:...

Tungsten carbide tipped with roll forged flutes. A general purpose mortar and masonry drill bit suitable for workshop and maintenance. Manufactured to DIN 8039. 400mm length. • Flute Length 295mm• Shank...

Tungsten carbide tipped with roll forged flutes. A general purpose mortar and masonry drill bit suitable for workshop and maintenance. Manufactured to DIN 8039. 300mm length. • Flute Length 175mm• Shank...

Tungsten carbide tipped with roll forged flutes. A general purpose mortar and masonry drill bit suitable for workshop and maintenance. Manufactured to DIN 8039. 150mm to 160mm length. • Flute Length 85mm• Shank...

Tungsten carbide tipped with roll forged flutes. A general purpose mortar and masonry drill bit suitable for workshop and maintenance. Manufactured to DIN 8039. 75mm to 120mm length. • Flute Length 75mm• Shank...

Tungsten carbide tipped with roll forged flutes. A general purpose mortar and masonry drill bit suitable for workshop and maintenance. Manufactured to DIN 8039. 300mm length. • Flute Length 210mm• Shank...

Tungsten carbide tipped with roll forged flutes. A general purpose mortar and masonry drill bit suitable for workshop and maintenance. Manufactured to DIN 8039. 150mm to 160mm length. • Flute Length 85mm• Shank...

Tungsten carbide tipped with roll forged flutes. A general purpose mortar and masonry drill bit suitable for workshop and maintenance. Manufactured to DIN 8039. 75mm to 120mm length. • Flute Length 75mm• Shank...

Manufactured from top quality sintered steels. For use on a wide range of applications from roughing to finishing. Manufactured to BS1296:Part 3:1978.External Screw CuttingRight Hand • Tip Material HSS• Standards Met BS 1296...

Manufactured from top quality sintered steels. For use on a wide range of applications from roughing to finishing. Manufactured to BS1296:Part 3:1978.External Screw CuttingRight Hand • Tip Material HSS• Standards Met BS 1296...

Tungsten carbide tipped with roll forged flutes. A general purpose mortar and masonry drill bit suitable for workshop and maintenance. Manufactured to DIN 8039. 300mm length. • Flute Length 180mm• Shank...

Tungsten carbide tipped with roll forged flutes. A general purpose mortar and masonry drill bit suitable for workshop and maintenance. Manufactured to DIN 8039. 150mm to 160mm length. • Flute Length 85mm• Shank...

Tungsten carbide tipped with roll forged flutes. A general purpose mortar and masonry drill bit suitable for workshop and maintenance. Manufactured to DIN 8039. 75mm to 120mm length. • Flute Length 55mm• Shank...

Tungsten carbide tipped with roll forged flutes. A general purpose mortar and masonry drill bit suitable for workshop and maintenance. Manufactured to DIN 8039. 150mm to 160mm length. • Flute Length 80mm• Shank...

Tungsten carbide tipped with roll forged flutes. A general purpose mortar and masonry drill bit suitable for workshop and maintenance. Manufactured to DIN 8039. 75mm to 120mm length. • Flute Length 55mm• Shank...

7 Piece - Standard LengthStandard Length: No.6 x 75, No.8 x 85, No.10 x 85, No.10A x 100, No.12 x 100, No.16 x 120, No.20 x 120mm.7 Piece - Standard & Medium LengthStandard Length: No.10 x 85, No.12 x 100, No.14 x 100, No.16 x 120, No.20 x 120.Medium...

Tungsten carbide tipped with roll forged flutes. A general purpose mortar and masonry drill bit suitable for workshop and maintenance. Manufactured to DIN 8039. 150mm to 160mm length. • Flute Length 80mm• Shank...

Tungsten carbide tipped with roll forged flutes. A general purpose mortar and masonry drill bit suitable for workshop and maintenance. Manufactured to DIN 8039. 75mm to 120mm length. • Flute Length 45mm• Shank...

Recommended for simple, low cost removal of broken screws, bolts etc, without damaging the threads of the component. • Maximum Screw Capacity 5/32in.• Type Screw Extractor• Minimum Screw Capacity 3/32in...

Inch SeriesUsed to produce 60 centres in components for subsequent manufacturing operations to be carried out. Tool life is extended and difficult materials may be drilled. Manufactured to BS328. 60° inclusive angle. 118° drill point...

Bi-Material File Handle.Polypropylene file handles with integral hanging hole and covered with a ribbed rubber grip for increased purchase and added comfort.Available in three sizes: 0, 1 and 2. • Size 1• Handle...

Manufactured from top quality sintered steels. For use on a wide range of applications from roughing to finishing. Manufactured to BS1296:Part 3:1978.Light Turning & FacingRight Hand • Tip Material HSS• Standards Met BS...

Bi-Material File Handle.Polypropylene file handles with integral hanging hole and covered with a ribbed rubber grip for increased purchase and added comfort.Available in three sizes: 0, 1 and 2. • Size 0• Handle...

With straight flutes and short fluted helix at point. Ideal for tapping through holes as swarf is directed ahead of the tap. Flutes are narrower than those of taps required to pull swarf towards the shank and act as lubricant channels, giving greater tap...

With high helix (45), right hand spiral flutes, designed to pull swarf towards the shank of the tap. Most suitable for blind-hole tapping. Manufactured to BS 949 : Part 4 : 199 and ISO 529 : 1975. Tolerance 6H.\r\nOxidised finish (black): special heat...

With high helix (45), right hand spiral flutes, designed to pull swarf towards the shank of the tap. Most suitable for blind-hole tapping. Manufactured to BS 949 : Part 4 : 199 and ISO 529 : 1975. Tolerance 6H.\r\nBright finish: standard finish for...

HSS - EV. Oxide Finish. Tolerance 6H. Manufactured to DIN 371.

With straight flutes and short fluted helix at point. Ideal for tapping through holes as swarf is directed ahead of the tap. Flutes are narrower than those of taps required to pull swarf towards the shank and act as lubricant channels, giving greater tap...