Reamers

Used to produce a close tolerance surface finish by enlarging pre-drilled holes to a finished size. Manufactured from HSS with a 45 bevelled head. Manufactured to BS 328-4.TOLERANCES (to H7):Diameter: ~ up to 3.00. Tolerance: +0.008, -0.007.Diameter:...

Metric.Used to produce a close tolerance surface finish by hand in almost any environment i.e. on site or in a workshop. Manufactured to BS 328 : Part 4 : 1990 and DIN 206B.METRIC TOLERANCES:Diameter: ~ up to 3.00. Tolerance: +0.008, -0.007.Diameter:...

Metric.Used to produce a close tolerance surface finish in taper holes to allow the fitting of hardened and ground taper pins in the building of jigs, fixtures and dies. Manufactured to BS 328 : Part 4 : 1990 and DIN 9A.METRIC TOLERANCES:Diameter: Over 1...

Left hand spiral flute, right hand cutting. Manufactured to BS 328-4.METRIC TOLERANCES (to H7):Diameter: ~ up to 3.00. Tolerance: High +0.008, Low -0.004.Diameter: Over 3.00 ~ up to 6.00. Tolerance: High +0.010, Low -0.005.Diameter: Over 6.00 ~ up to 10...

Manufactured to DIN 212.Tolerances (to H7)Diameter: ~ up to 5.50. Tolerance: +0.004, -0.000.Diameter: Over 5.50 ~. Tolerance: +0.005, -0.000. • Shank Type Straight• Number of Flutes 6• Cutting Direction Right...

Metric.Used to produce a close tolerance surface finish by hand in almost any environment i.e. on site or in a workshop. Manufactured to BS 328 : Part 4 : 1990 and DIN 206B.METRIC TOLERANCES:Diameter: ~ up to 3.00. Tolerance: +0.008, -0.007.Diameter:...

Left hand spiral flute, right hand cutting. Manufactured to BS 328-4.METRIC TOLERANCES (to H7):Diameter: ~ up to 3.00. Tolerance: High +0.008, Low -0.004.Diameter: Over 3.00 ~ up to 6.00. Tolerance: High +0.010, Low -0.005.Diameter: Over 6.00 ~ up to 10...

Sherwood machine reamers are used to produce a close tolerance surface finish by enlarging pre-drilled holes to a finished size. Manufactured from HSS with a 45 bevelled head. Conform to BS 122 : Part 2 and BS 328 Part 4.INCH TOLERANCES:Diameter: ~ up to...

Inch.Used to produce a close tolerance surface finish by hand in almost any environment i.e. on site or in a workshop. Manufactured to BS 328-4 and DIN 206B.INCH TOLERANCES:Diameter: ~ up to 0.1181. Tolerance: +0.0005, -0.0013.Diameter: Over 0.1181 ~ up...

Inch.Sherwood Taper Pin hand reamers are used to produce a close tolerance surface finish in taper holes to allow the fitting of hardened and ground taper pins in the building of jigs, fixtures and dies. Manufactured to BS 328 : Part 4 : 1990 and DIN 9A...

Left hand spiral flute, right hand cutting. Manufactured to BS 122.INCH TOLERANCES:Diameter: ~ up to 1/8". Tolerance: High +0.0003, Low -0.0001.Diameter: Over 1/8" ~ up to 15/64". Tolerance: High +0.0004, Low -0.0002.Diameter: Over 15/64" ~ up to 3/8"...

Sherwood machine reamers are used to produce a close tolerance surface finish by enlarging pre-drilled holes to a finished size. Manufactured from HSS with a 45 bevelled head. Conform to BS 122 : Part 2 and BS 328 Part 4.INCH TOLERANCES:Diameter: ~ up to...

Inch.Used to produce a close tolerance surface finish by hand in almost any environment i.e. on site or in a workshop. Manufactured to BS 328-4 and DIN 206B.INCH TOLERANCES:Diameter: ~ up to 0.1181. Tolerance: +0.0005, -0.0013.Diameter: Over 0.1181 ~ up...

For all dimensional specifications please refer to our catalogue.

Sherwood Taper Pin hand reamers are used to produce a close tolerance surface finish in taper holes to allow the fitting of hardened and ground taper pins in the building of jigs, fixtures and dies. Manufactured to BS 328 : Part 4 : 199 and DIN 9A...

Inch.Used to produce a close tolerance surface finish by hand in almost any environment i.e. on site or in a workshop. Manufactured to BS 328-4 and DIN 206B.INCH TOLERANCES:Diameter: ~ up to 0.1181. Tolerance: +0.0005, -0.0013.Diameter: Over 0.1181 ~ up...

Inch.Sherwood Taper Pin hand reamers are used to produce a close tolerance surface finish in taper holes to allow the fitting of hardened and ground taper pins in the building of jigs, fixtures and dies. Manufactured to BS 328 : Part 4 : 1990 and DIN 9A...

Left hand spiral flute, right hand cutting. Manufactured to BS 122.INCH TOLERANCES:Diameter: ~ up to 1/8". Tolerance: High +0.0003, Low -0.0001.Diameter: Over 1/8" ~ up to 15/64". Tolerance: High +0.0004, Low -0.0002.Diameter: Over 15/64" ~ up to 3/8"...

Manufactured to DIN 212.Tolerances (to H7)Diameter: ~ up to 5.50. Tolerance: +0.004, -0.000.Diameter: Over 5.50 ~. Tolerance: +0.005, -0.000. • Shank Type Straight• Number of Flutes 6• Cutting Direction Right...

Metric.Used to produce a close tolerance surface finish by hand in almost any environment i.e. on site or in a workshop. Manufactured to BS 328 : Part 4 : 1990 and DIN 206B.METRIC TOLERANCES:Diameter: ~ up to 3.00. Tolerance: +0.008, -0.007.Diameter:...

Manufactured to DIN 212.Tolerances (to H7)Diameter: ~ up to 5.50. Tolerance: +0.004, -0.000.Diameter: Over 5.50 ~. Tolerance: +0.005, -0.000. • Shank Type Straight• Number of Flutes 6• Cutting Direction Right...

Used to produce a close tolerance surface finish by enlarging pre-drilled holes to a finished size. Manufactured from HSS with a 45 bevelled head. Manufactured to BS 328-4.TOLERANCES (to H7):Diameter: ~ up to 3.00. Tolerance: +0.008, -0.007.Diameter:...

Metric.Used to produce a close tolerance surface finish by hand in almost any environment i.e. on site or in a workshop. Manufactured to BS 328 : Part 4 : 1990 and DIN 206B.METRIC TOLERANCES:Diameter: ~ up to 3.00. Tolerance: +0.008, -0.007.Diameter:...

Metric.Used to produce a close tolerance surface finish in taper holes to allow the fitting of hardened and ground taper pins in the building of jigs, fixtures and dies. Manufactured to BS 328 : Part 4 : 1990 and DIN 9A.METRIC TOLERANCES:Diameter: Over 1...

Left hand spiral flute, right hand cutting. Manufactured to BS 328-4.METRIC TOLERANCES (to H7):Diameter: ~ up to 3.00. Tolerance: High +0.008, Low -0.004.Diameter: Over 3.00 ~ up to 6.00. Tolerance: High +0.010, Low -0.005.Diameter: Over 6.00 ~ up to 10...

Used to produce a close tolerance surface finish by enlarging pre-drilled holes to a finished size. Manufactured from HSS with a 45 bevelled head. Manufactured to BS 328-4.\n\nTolerances (to H7)\nDiameter: ~ up to 3.. Tolerance: +.8, -.7.\nDiameter: Over...

Used to produce a close tolerance surface finish by enlarging pre-drilled holes to a finished size. Manufactured from HSS with a 45 bevelled head. Manufactured to BS 328-4.TOLERANCES (to H7):Diameter: ~ up to 3.00. Tolerance: +0.008, -0.007.Diameter:...

Metric.Used to produce a close tolerance surface finish by hand in almost any environment i.e. on site or in a workshop. Manufactured to BS 328 : Part 4 : 1990 and DIN 206B.METRIC TOLERANCES:Diameter: ~ up to 3.00. Tolerance: +0.008, -0.007.Diameter:...

Used to produce a close tolerance surface finish by enlarging pre-drilled holes to a finished size. Manufactured from HSS with a 45 bevelled head. Manufactured to BS 328-4.TOLERANCES (to H7):Diameter: ~ up to 3.00. Tolerance: +0.008, -0.007.Diameter:...

Manufactured to DIN 212.Tolerances (to H7)Diameter: ~ up to 5.50. Tolerance: +0.004, -0.000.Diameter: Over 5.50 ~. Tolerance: +0.005, -0.000. • Shank Type Straight• Number of Flutes 8• Cutting Direction Right...

Used to produce a close tolerance surface finish by enlarging pre-drilled holes to a finished size. Manufactured from HSS with a 45 bevelled head. Manufactured to BS 328-4.TOLERANCES (to H7):Diameter: ~ up to 3.00. Tolerance: +0.008, -0.007.Diameter:...

Metric.Used to produce a close tolerance surface finish by hand in almost any environment i.e. on site or in a workshop. Manufactured to BS 328 : Part 4 : 1990 and DIN 206B.METRIC TOLERANCES:Diameter: ~ up to 3.00. Tolerance: +0.008, -0.007.Diameter:...

Metric.Used to produce a close tolerance surface finish by hand in almost any environment i.e. on site or in a workshop. Manufactured to BS 328 : Part 4 : 1990 and DIN 206B.METRIC TOLERANCES:Diameter: ~ up to 3.00. Tolerance: +0.008, -0.007.Diameter:...

Used to produce a close tolerance surface finish in taper holes to allow the fitting of hardened and ground taper pins in the building of jigs, fixtures and dies. Manufactured to BS 328 : Part 4 : 199 and DIN 9A.\n\nMetric Tolerances\nDiameter: Over 1.5...

Left hand spiral flute, right hand cutting. Manufactured to BS 328-4.METRIC TOLERANCES (to H7):Diameter: ~ up to 3.00. Tolerance: High +0.008, Low -0.004.Diameter: Over 3.00 ~ up to 6.00. Tolerance: High +0.010, Low -0.005.Diameter: Over 6.00 ~ up to 10...

Used to produce a close tolerance surface finish by enlarging pre-drilled holes to a finished size. Manufactured from HSS with a 45 bevelled head. Manufactured to BS 328-4.TOLERANCES (to H7):Diameter: ~ up to 3.00. Tolerance: +0.008, -0.007.Diameter:...

Metric.Used to produce a close tolerance surface finish by hand in almost any environment i.e. on site or in a workshop. Manufactured to BS 328 : Part 4 : 1990 and DIN 206B.METRIC TOLERANCES:Diameter: ~ up to 3.00. Tolerance: +0.008, -0.007.Diameter:...

Used to produce a close tolerance surface finish by enlarging pre-drilled holes to a finished size. Manufactured from HSS with a 45 bevelled head. Manufactured to BS 328-4.TOLERANCES (to H7):Diameter: ~ up to 3.00. Tolerance: +0.008, -0.007.Diameter:...

Metric.Used to produce a close tolerance surface finish by hand in almost any environment i.e. on site or in a workshop. Manufactured to BS 328 : Part 4 : 1990 and DIN 206B.METRIC TOLERANCES:Diameter: ~ up to 3.00. Tolerance: +0.008, -0.007.Diameter:...

Used to produce a close tolerance surface finish by enlarging pre-drilled holes to a finished size. Manufactured from HSS with a 45 bevelled head. Manufactured to BS 328-4.TOLERANCES (to H7):Diameter: ~ up to 3.00. Tolerance: +0.008, -0.007.Diameter:...