Taps & Dies

Recommended for simple, low cost removal of broken screws, bolts etc, without damaging the threads of the component. • Maximum Screw Capacity 7/8in.• Type Screw Extractor• Minimum Screw Capacity 5/8in...

Recommended for simple, low cost removal of broken screws, bolts etc, without damaging the threads of the component. • Maximum Screw Capacity 5/8in.• Type Screw Extractor• Minimum Screw Capacity 3/8in...

Recommended for simple, low cost removal of broken screws, bolts etc, without damaging the threads of the component. • Maximum Screw Capacity 3/8in.• Type Screw Extractor• Minimum Screw Capacity 9/32in...

Recommended for simple, low cost removal of broken screws, bolts etc, without damaging the threads of the component. • Maximum Screw Capacity 9/32in.• Type Screw Extractor• Minimum Screw Capacity 7/32in...

Recommended for simple, low cost removal of broken screws, bolts etc, without damaging the threads of the component. • Maximum Screw Capacity 7/32in.• Type Screw Extractor• Minimum Screw Capacity 5/32in...

Recommended for simple, low cost removal of broken screws, bolts etc, without damaging the threads of the component. • Maximum Screw Capacity 5/32in.• Type Screw Extractor• Minimum Screw Capacity 3/32in...

With straight flutes and short fluted helix at point. Ideal for tapping through holes as swarf is directed ahead of the tap. Flutes are narrower than those of taps required to pull swarf towards the shank and act as lubricant channels, giving greater tap...

With straight flutes and short fluted helix at point. Ideal for tapping through holes as swarf is directed ahead of the tap. Flutes are narrower than those of taps required to pull swarf towards the shank and act as lubricant channels, giving greater tap...

With high helix (45), right hand spiral flutes, designed to pull swarf towards the shank of the tap. Most suitable for blind-hole tapping. Manufactured to BS 949 : Part 4 : 199 and ISO 529 : 1975. Tolerance 6H.\r\nOxidised finish (black): special heat...

With high helix (45), right hand spiral flutes, designed to pull swarf towards the shank of the tap. Most suitable for blind-hole tapping. Manufactured to BS 949 : Part 4 : 199 and ISO 529 : 1975. Tolerance 6H.\r\nBright finish: standard finish for...

HSS - EV. Oxide Finish. Tolerance 6H. Manufactured to DIN 371.

With straight flutes and short fluted helix at point. Ideal for tapping through holes as swarf is directed ahead of the tap. Flutes are narrower than those of taps required to pull swarf towards the shank and act as lubricant channels, giving greater tap...

With straight flutes and short fluted helix at point. Ideal for tapping through holes as swarf is directed ahead of the tap. Flutes are narrower than those of taps required to pull swarf towards the shank and act as lubricant channels, giving greater tap...

With high helix (45), right hand spiral flutes, designed to pull swarf towards the shank of the tap. Most suitable for blind-hole tapping. Manufactured to BS 949 : Part 4 : 199 and ISO 529 : 1975. Tolerance 6H.\r\nOxidised finish (black): special heat...

With high helix (45), right hand spiral flutes, designed to pull swarf towards the shank of the tap. Most suitable for blind-hole tapping. Manufactured to BS 949 : Part 4 : 199 and ISO 529 : 1975. Tolerance 6H.\r\nBright finish: standard finish for...

HSS - EV. Oxide Finish. Tolerance 6H. Manufactured to DIN 371.

With straight flutes and short fluted helix at point. Ideal for tapping through holes as swarf is directed ahead of the tap. Flutes are narrower than those of taps required to pull swarf towards the shank and act as lubricant channels, giving greater tap...

With high helix (45), right hand spiral flutes, designed to pull swarf towards the shank of the tap. Most suitable for blind-hole tapping. Manufactured to BS 949 : Part 4 : 199 and ISO 529 : 1975. Tolerance 6H.\r\nOxidised finish (black): special heat...

HSS - EV. Oxide Finish. Tolerance 6H. Manufactured to DIN 371.

With straight flutes and short fluted helix at point. Ideal for tapping through holes as swarf is directed ahead of the tap. Flutes are narrower than those of taps required to pull swarf towards the shank and act as lubricant channels, giving greater tap...

With high helix (45), right hand spiral flutes, designed to pull swarf towards the shank of the tap. Most suitable for blind-hole tapping. Manufactured to BS 949 : Part 4 : 199 and ISO 529 : 1975. Tolerance 6H.\r\nOxidised finish (black): special heat...

HSS - EV. Oxide Finish. Tolerance 6H. Manufactured to DIN 371.

With straight flutes and short fluted helix at point. Ideal for tapping through holes as swarf is directed ahead of the tap. Flutes are narrower than those of taps required to pull swarf towards the shank and act as lubricant channels, giving greater tap...

With high helix (45), right hand spiral flutes, designed to pull swarf towards the shank of the tap. Most suitable for blind-hole tapping. Manufactured to BS 949 : Part 4 : 199 and ISO 529 : 1975. Tolerance 6H.\r\nOxidised finish (black): special heat...

With high helix (45), right hand spiral flutes, designed to pull swarf towards the shank of the tap. Most suitable for blind-hole tapping. Manufactured to BS 949 : Part 4 : 199 and ISO 529 : 1975. Tolerance 6H.\r\nBright finish: standard finish for...

HSS - EV. Oxide Finish. Tolerance 6H. Manufactured to DIN 371.

With high helix (45), right hand spiral flutes, designed to pull swarf towards the shank of the tap. Most suitable for blind-hole tapping. Manufactured to BS 949 : Part 4 : 199 and ISO 529 : 1975. Tolerance 6H.\r\nOxidised finish (black): special heat...

With straight flutes and short fluted helix at point. Ideal for tapping through holes as swarf is directed ahead of the tap. Flutes are narrower than those of taps required to pull swarf towards the shank and act as lubricant channels, giving greater tap...

With straight flutes and short fluted helix at point. Ideal for tapping through holes as swarf is directed ahead of the tap. Flutes are narrower than those of taps required to pull swarf towards the shank and act as lubricant channels, giving greater tap...

With high helix (45), right hand spiral flutes, designed to pull swarf towards the shank of the tap. Most suitable for blind-hole tapping. Manufactured to BS 949 : Part 4 : 199 and ISO 529 : 1975. Tolerance 6H.\r\nOxidised finish (black): special heat...

With high helix (45), right hand spiral flutes, designed to pull swarf towards the shank of the tap. Most suitable for blind-hole tapping. Manufactured to BS 949 : Part 4 : 199 and ISO 529 : 1975. Tolerance 6H.\r\nBright finish: standard finish for...

With straight flutes and short fluted helix at point. Ideal for tapping through holes as swarf is directed ahead of the tap. Flutes are narrower than those of taps required to pull swarf towards the shank and act as lubricant channels, giving greater tap...

HSS - EV. Oxide Finish. Tolerance 6H. Manufactured to DIN 371.

With straight flutes and short fluted helix at point. Ideal for tapping through holes as swarf is directed ahead of the tap. Flutes are narrower than those of taps required to pull swarf towards the shank and act as lubricant channels, giving greater tap...

With straight flutes and short fluted helix at point. Ideal for tapping through holes as swarf is directed ahead of the tap. Flutes are narrower than those of taps required to pull swarf towards the shank and act as lubricant channels, giving greater tap...

With straight flutes and short fluted helix at point. Ideal for tapping through holes as swarf is directed ahead of the tap. Flutes are narrower than those of taps required to pull swarf towards the shank and act as lubricant channels, giving greater tap...

With high helix (45), right hand spiral flutes, designed to pull swarf towards the shank of the tap. Most suitable for blind-hole tapping. Manufactured to BS 949 : Part 4 : 199 and ISO 529 : 1975. Tolerance 6H.\r\nOxidised finish (black): special heat...

With straight flutes and short fluted helix at point. Ideal for tapping through holes as swarf is directed ahead of the tap. Flutes are narrower than those of taps required to pull swarf towards the shank and act as lubricant channels, giving greater tap...

With high helix (45), right hand spiral flutes, designed to pull swarf towards the shank of the tap. Most suitable for blind-hole tapping. Manufactured to BS 949 : Part 4 : 199 and ISO 529 : 1975. Tolerance 6H.\r\nOxidised finish (black): special heat...

With high helix (45), right hand spiral flutes, designed to pull swarf towards the shank of the tap. Most suitable for blind-hole tapping. Manufactured to BS 949 : Part 4 : 199 and ISO 529 : 1975. Tolerance 6H.\r\nBright finish: standard finish for...