EZB001

American pattern with solid single twist. Spur point and hexagon shank for use with hand and power tools. Cutting Diameter 22mm Compatible Materials Wood Shank Diameter 9mm Centre Type Solid Overall Length 230mm

1” Drive Inch Size, Standard Length, 6-PointConform to: SAE, USA Federal Standard GGG-W-660A.Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings. • Material Chrome...

Bi-Hexagon Sockets12 point – side drive design gives a higher torque than normal sockets, grip worn nuts and will not round off existing nuts. All have a ball-retaining groove on each face of the square drive, which ensures a positive fit with...

1/2” Drive Inch Size, Standard Length, 6-PointConform to: SAE, USA Federal Standard GGG-W-660A.Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings. • Size...

Long Series - Inch\nKennedy KC3 throwaway 3* flute endmills are manufactured HSS-Co 5% making them much tougher than HSS. This means that Kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. \n*Except: 1mm...

4 Flute: Regular Series - InchCentre cutting as standard. For maximum strength when milling harder materials where rapid swarf removal is not needed. 4 flute milling cutters have one of the strongest tooth structures available in solid cutters...

Chrome vanadium steel* with a satin finish body and highly polished heads, with a 15° offset.DIN 3110: 1/4" x 5/16" to 1 5/16" x 1 5/8" AF.ASME B107.39: 1 7/16" x 1 5/8" to 1 13/16" x 2" AF.*1 7/16" x 1 5/8", 1 1/2" x 1 5/8", 1 11/16" x 1 7/8", 1...

1/2” Drive BSW Size, Deep Length, 6-PointConform to: SAE, USA Federal Standard GGG-W-660A.Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings. • Size...

Bi-Hexagon Sockets12 point – side drive design gives a higher torque than normal sockets, grip worn nuts and will not round off existing nuts. All have a ball-retaining groove on each face of the square drive, which ensures a positive fit with...

Ideal for assembly and servicing of small precision mechanisms associated with electrical, electronic, ignition and refrigeration work. All bi-hexagon unless stated.Double knurl feature gives a high grip which is essential for a quick tool change when...

Manufactured from chrome vanadium steel with highly polished mirror finish.Mirror finish prevents oil and dirt from adhering to the spannermaking for easier cleaning and preventing rust.Long reach, wall drive. Conform with ANSE B107.6. Chrome plated...

3/8” Drive Inch Size, Deep Length, 6-PointConform to: SAE, USA Federal Standard GGG-W-660A.Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings. • Number of...

4 Flute: Regular Series - Metric Centre Cutting As Standard. For Maximum Strength When Milling Harder Materials Where Rapid Swarf Removal Is Not Needed. 4 Flute Milling Cutters Have One Of The Strongest Tooth Structures Available In Solid Cutters...

London pattern, a smooth rounded end wooden handle with integral tang.

Edges taper towards point. For filing and sharpening saws. Points are left uncut. Instead of having a tang, both ends are tapered. They are used for sharpening saws having a 60° angle. The teeth are cut from each end towards the centre. Manufactured...

These straight and bent nose pliers are reversible for both internal (DIN472) and external (DIN471) circlip insertion and removal, made from heat treated chrome molybdenum steel with comfortable insulated vinyl handles.The benefits of having properly...

These straight and bent nose pliers are reversible for both internal (DIN472) and external (DIN471) circlip insertion and removal, made from heat treated chrome molybdenum steel with comfortable insulated vinyl handles.The benefits of having properly...

MetricChrome vanadium steel. 15° cranked open end. Offset ring end. Up to 25% longer than conventional DIN 3113 combination spanners. Conform to DIN 3113B.Chrome plated finish to pevent from corosion.Ring head angle - 50°Open end head angle -...

Deep impact sockets 1/2in. drive that are made from chrome molybdenum alloy steel with a black oxidised finish. Used for turning nuts onto bolts.Features and Benefits• Clearly marked for a quick and easy selection • Socket...

Available in a range of variations and specifications. Crafted from high quality Chrome Molybdenum with a square drive and 6 points. Also features laser etched markings. Finished with a black oxide coat.Features and Benefits• Made from chrome...

Manufactured from hardened and tempered chrome vanadium steel, with satin chrome finish. Oil and acid resistant high impact plastic handles. 6” (150mm) combined socket and blade length. Overall length: 230mm. • Number of...

1" drive impact socket that's made from chrome molybdenum alloy steel with a black oxidised finish. The socket is clearly marked making it easy to identify for a quicker selection. Used for turning nuts onto bolts. • Socket...

1" drive deep impact socket that's made from chrome molybdenum alloy steel with a black oxidised finish. The socket is clearly marked making it easy to identify for a quicker selection. Used for turning nuts onto bolts. • Drive End...

* For scraping paint and varnish off wood * High carbon steel four edged blade * Convex edges to reduce surface damage * Bi-material handle comfort grip * 38mm (1 ½") or 64mm (2 ½") blade...

1" drive impact socket that's made from chrome molybdenum alloy steel with a black oxidised finish. The socket is clearly marked making it easy to identify for a quicker selection. Used for turning nuts onto bolts. • Socket...

Kennedy Carbide Tipped Holesaws Last Up To 10 Times Longer Than Standard Holesaws And Resist Wear And Heat Caused By Friction Much Better Than Traditional Holesaws, Making Them The Best Choice For Cutting Tough Material Such As Tile, Stainless Steel. Use...

MetricFor drilling steels, cast steels, cast iron, chilled cast iron, malleable cast iron, non-ferrous heavy and light metal and abrasive plastic. Point angle 118°. Tolerance of diameter: h7. Tolerance of shank: h6.Supply unit. All diameters - 1 pce...

Long Series

TiN-Coated to allow elevated cutting speeds and help to extend tool life.\n\nShort Series\n\nLong Series

Long Series

4 Flute: Regular Series - Metric Centre Cutting As Standard. For Maximum Strength When Milling Harder Materials Where Rapid Swarf Removal Is Not Needed. 4 Flute Milling Cutters Have One Of The Strongest Tooth Structures Available In Solid Cutters...

3 Flute: Regular Series - Metric Centre Cutting As Standard. Offer A Combination Of Advantages Achieved With Two And Four Flutes Giving Profile And Peripheral Milling Capability In Addition To Slotting And Plunging. Manufactured To Works Standards...

2 Flute: Regular Series - Metric For Optimum Performance And Maximum Swarf Removal When Plunging, Slotting And Routing In Light Alloys, Brass, Aluminium, Non-Ferrous And Other Soft Materials. Manufactured To Works Standards. Metric...

Positive Indent (Standard)\nDrawn carbon steel nickel-plated hand stamps with chamfered edges to prevent accidental damage to workpiece.

Positive Indent (Standard)\nDrawn carbon steel nickel-plated hand stamps with chamfered edges to prevent accidental damage to workpiece.

Fork Connector TerminalsPack quantity: 100.Durable low cost copper or brass connectors. Manufactured as single piece connectors. Electro tinned to protect from corrosion. Insulated with flared entry, colour coded vinyl sleeves. All disconnect terminals...

Chrome Vanadium Steel Blades With Magnetic Tips. Fitted With A Unique Dual Grip Triangular Handle Which Has Been Designed For Improved User Comfort, Allowing More Torque To Be Applied. Manufactured With Convenient Hanging Hole In The Handle For Storage...

Kennedy combination spanners are manufactured from chrome vanadium steel with a satin finish body and highly polished heads. 15 open jaw angle to shank and ring end offset.Conform to:6mm - 25mm - DIN 3113.26mm - 32mm - ASME B107.6.Contents6, 7, 8, 9, 10,...

Chrome vanadium steel with a satin finish body and highly polished heads, with a 15° offset.DIN 3110.Contents6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17 and 18 x 19mm.   • Material Chrome Vanadium...

Kennedy combination spanners are manufactured from chrome vanadium steel with a satin finish body and highly polished heads. 15 open jaw angle to shank and ring end offset.Conforms to: DIN 3113.Contents6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18 and...