EZB002

Ideal for assembly and servicing of small precision mechanisms associated with electrical, electronic, ignition and refrigeration work. All bi-hexagon unless stated.Double knurl feature gives a high grip which is essential for a quick tool change when...

Chrome vanadium steel with mirror polish finish, preventing oil and dirt from adhering to the spanner, making for easier cleaning and preventing rust. 72-teeth ratcheting system which needs only 5° movement to operate ratchet. Thin wall design for...

1/2” Drive Inch Size, Standard Length, 6-PointConform to: SAE, USA Federal Standard GGG-W-660A.Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings. • Socket End...

Inch - Standard LengthManufactured from fully hardened carbon steel in accordance with DIN 911 ensuring a quality ductile key with precision square cut ends and accurate AF dimensions to ensure full socket contact. Black finish. • Short Arm...

Bi-Hexagon Sockets12 point - side drive design gives a higher torque than normal sockets, grip worn nuts and will not round off existing nuts.All have a ball-retaining groove on each face of the square drive, which ensures a positive fit with accessories...

1/2" Drive Inch Size, Deep Length, 6-PointConform to: SAE, USA Federal Standard GGG-W-660A.Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings.   • Size...

AFManufactured from chrome vanadium steel with a chrome satin finish body and highly polished heads. 15 open jaw angle to shank and ring end offset.Chrome plated finish to pevent from corosion.Ring head angle - 13°Conform to:1/4" - 1" AF - DIN 3113...

Open End16mm Bore AF (Inch) • End Type Open Ended• Spigot Size 16mm

Manufactured to BS EN ISO 3650.Available in two grades:Grade 2: For workshop use.Grade 1: For inspection use.Many intermediate sizes to .001mm increments are also available from stock.Inch sizes available on request - many sizes from stock...

HSS-Co Heavy Duty Straight Shank Jobber DrillsMetricHeavy duty drill made of 5% cobalt material with excellent heat resistance. To drill steels with tensile strength up to 1,400 N/mm², very hard bronze, stainless steels as well as heat and acid...

Beechwood handle, V-cut.   • Overall Length 195mm • Diameter 3/4in. • Tool Features V-cut • Handle Material Beechwood • Type Tacklifter

Used in hand tapping operations and provide the reach and leverage needed for accurate tapping in tight spaces. Heavy duty ductile steel body with knurled chuck, four equalising jaws to hold the tap true and sliding T-bar which can be used when tapping...

For cutting cardboard, leather, rope, cord, wire, paper & many other materials. Precision ground & hardened stainless steel blades - HRC 50-54 - with one serrated cutting edge to reduce slipping. Lightweight polypropylene handles with spring...

Used for marking regular and irregular angles. The 9” sliding steel blade can be locked into any position using the brass thumbscrew. Rosewood stock with brass tips for greater wear resistance. • Graduation Type 9in...

The asymmetrical Bi-material comfort handle design with hardened and ground steel blades allows the scissors to be used comfortably just above the work surface when cutting cloth in a straight line. The straight and curved blade tips are suitable for...

HexagonAll Kennedy screwdriver bits have a hardness of 58 - 62HRC. High alloy chrome molybdenum steel for use on hand and power tools.  • Tip Size 7.0• Bit Material Chrome Molybdenum Steel• For Use...

Metric - Standard LengthManufactured from fully hardened carbon steel in accordance with DIN 911 ensuring a quality ductile key with precision square cut ends and accurate AF dimensions to ensure full socket contact. Black finish. • Short Arm...

MetricManufactured from fully hardened carbon steel in accordance with DIN 911. A quality ductile key with precision cut ends and accurate AF dimensional to ensure maximum socket contact. Ball end allows up to 30° work offset. Long arm end is ball...

Manufactured to BS EN ISO 3650.Available in two grades:Grade 2: For workshop use.Grade 1: For inspection use.Many intermediate sizes to .001mm increments are also available from stock.Inch sizes available on request - many sizes from stock...

Manufactured to BS EN ISO 3650.Available in two grades:Grade 2: For workshop use.Grade 1: For inspection use.Many intermediate sizes to .001mm increments are also available from stock.Inch sizes available on request - many sizes from stock...

Spare Bits for Kennedy Spiral Ratchet Screwdriver (572-816)(picture for ilustration purpose only) • Bit Type Slotted• Tip Size 7.0mm

Used in hand tapping operations and provide the reach and leverage needed for accurate tapping in tight spaces. Heavy duty ductile steel body with knurled chuck, four equalising jaws to hold the tap true and sliding T-bar which can be used when tapping...

Tungsten carbide tipped SDS masonry drills are suitable for all SDS direct fitting hammer drills. High performance drill bits that withstand extreme heat generation ensuring maximum performance coupled with wear resistance. Manufactured to DIN 8035...

Tungsten carbide tipped SDS masonry drills are suitable for all SDS direct fitting hammer drills. High performance drill bits that withstand extreme heat generation ensuring maximum performance coupled with wear resistance. Manufactured to DIN 8035...

SetsManufactured from high quality steel tube. Zinc plated for corrosion resistance, each supplied with tommy bar.7 Piece Metric: 6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17 and 18 x 19mm. • Spanner Size 12mm x...

Scale TangHeavy duty blade and quality wooden handle. For removing paint from flat, concave and convex mouldings. • Tang Type Scale Tang• Overall Length 180mm• Blade Dimensions 60x45• Number of...

Straight Cutting/Curved CuttingShort bladed tinsnip giving precise control on intricate workpieces, ideal for jeweller’s, silversmith’s and model maker’s.   Blade Material Hardened Carbon Steel Type Jeweller’s...

Linesman PliersSerrated jaws for gripping nuts, bolts, studs etc. with side cutter and slip guardsafety handles.Spark-resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive environments...

Linesman PliersSerrated jaws for gripping nuts, bolts, studs etc. with side cutter and slip guard safety handles.Spark-resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive...

Non-twist blades manufactured from the finest quality stainless steel with plastic handles.Available in 160mm and 180mm lengths. • End Shape Pointed• Blade Material Stainless Steel• Hand Preference Right...

Asymmetrical handles with offset hardened and ground steel blades. Suitable for precise snipping or running along the edge of a cutting board. • End Shape Pointed• Blade Material Stainless Steel• Hand...

High strength reinforced offset steel blades with serrated cutting edge. Suitable for moderate to heavy cutting applications. • End Shape Rounded• Blade Material Stainless Steel• Hand Preference Right...

Used for the marking out of fine lines on metals. Manufactured from hardened and tempered high grade steel with knurled bodies for high grip and precision ground points for accurate marking. Available with a chisel point, pocket type, machinist's...

Straight Cutting/Curved CuttingShort bladed tinsnip giving precise control on intricate workpieces, ideal for jeweller’s, silversmith’s and model maker’s.   • Blade Material Hardened Carbon...

Sidebent ShearsStainless steel blades, large loop comfortable handles. For trimming. • End Shape Pointed• Blade Material Stainless Steel• Hand Preference Right Hand• Handle Material Stainless...

Inverted Cone.All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank.Cut Numbers:Cut 9 - ChipbreakerChipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC,...

Ball ShapeAll sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank.Cut Numbers:Cut 3 - Rapid CutFor use on softer non-ferrous and plastic materials, i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy.Cut 9 -...

Conical 60° Inc. Angle.All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank.Cut Numbers:Cut 9 - ChipbreakerChipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy...

FlatTiN Coated bits improve wear resistance, protect gripping points from the rigors of repetitive use. For use with hand and power tools.   • Tip Size 6.0• Bit Material Titanium• For Use With Hand and...

Round TreeAll sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank.Cut Numbers:Cut 3 - Rapid CutFor use on softer non-ferrous and plastic materials, i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy.Cut 9 -...