EZB002

Diameter tapers towards point. Suitable for internal and external concave surfaces. Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b. • Overall Length 250mm• Standards Met Manufactured to American...

Available with one or two round edges. Parallel edges, both edges cut for filing and sharpening saws. Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b. • MFR Part No. KB100102• Overall...

Fitted with ergonomically designed handles for a comfortable improved grip. Files manufactured from T12 CH-Moly alloy tool steel, hardened and tempered. Supplied in a woven wallet for easy storage.Manufactured to BS498:1990 and American Federal Standard...

Parallel edges, one edge uncut. For flat filing, corner filing and deburring. Multi-purpose and for other work where a 'safe' or uncut edge is needed. Double cut. Available in a comprehensive range of shapes and sizes.Manufactured to BS 498 : 1990 and...

Fitted with ergonomically designed handles for a comfortable improved grip. Files manufactured from T12 CH-Moly alloy tool steel, hardened and tempered. Supplied in a woven wallet for easy storage.Manufactured to BS498:1990 and American Federal Standard...

Parallel edges, one edge uncut. For flat filing, corner filing and deburring. Multi-purpose and for other work where a 'safe' or uncut edge is needed. Double cut. Available in a comprehensive range of shapes and sizes.Manufactured to BS 498 : 1990 and...

Fitted with ergonomically designed handles for a comfortable improved grip. Files manufactured from T12 CH-Moly alloy tool steel, hardened and tempered. Supplied in a woven wallet for easy storage.Manufactured to BS498:1990 and American Federal Standard...

Parallel edges, one edge uncut. For flat filing, corner filing and deburring. Multi-purpose and for other work where a 'safe' or uncut edge is needed. Double cut. Available in a comprehensive range of shapes and sizes.Manufactured to BS 498 : 1990 and...

Edges and surfaces taper towards point. Dual application; suitable for concave surfaces and flat filing. For rapid removal of metal. Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b. • MFR Part No...

Edges and surfaces taper towards point. Dual application; suitable for concave surfaces and flat filing. For rapid removal of metal. Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b. • MFR Part No...

Edges and surfaces taper towards point. Dual application; suitable for concave surfaces and flat filing. For rapid removal of metal. Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b. • MFR Part No...

Fitted with ergonomically designed handles for a comfortable improved grip. Files manufactured from T12 CH-Moly alloy tool steel, hardened and tempered. Supplied in a woven wallet for easy storage.Manufactured to BS498:1990 and American Federal Standard...

Fitted with ergonomically designed handles for a comfortable improved grip. Files manufactured from T12 CH-Moly alloy tool steel, hardened and tempered. Supplied in a woven wallet for easy storage.Manufactured to BS498:1990 and American Federal Standard...

Fitted with ergonomically designed handles for a comfortable improved grip. Files manufactured from T12 CH-Moly alloy tool steel, hardened and tempered. Supplied in a woven wallet for easy storage.Manufactured to BS498:1990 and American Federal Standard...

Fitted with ergonomically designed handles for a comfortable improved grip. Files manufactured from T12 CH-Moly alloy tool steel, hardened and tempered. Supplied in a woven wallet for easy storage.Manufactured to BS498:1990 and American Federal Standard...

Edges taper towards front. Applications as for hand files. Preferred where taper allows access into tight corners and angles. For general work on iron, steel, etc.Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b. • Overall...

Fitted with ergonomically designed handles for a comfortable improved grip. Files manufactured from T12 CH-Moly alloy tool steel, hardened and tempered. Supplied in a woven wallet for easy storage.Manufactured to BS498:1990 and American Federal Standard...

Edges taper towards front. Applications as for hand files. Preferred where taper allows access into tight corners and angles. For general work on iron, steel, etc.Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b. • Overall...

Fitted with ergonomically designed handles for a comfortable improved grip. Files manufactured from T12 CH-Moly alloy tool steel, hardened and tempered. Supplied in a woven wallet for easy storage.Manufactured to BS498:1990 and American Federal Standard...

Edges taper towards front. Applications as for hand files. Preferred where taper allows access into tight corners and angles. For general work on iron, steel, etc.Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b. • Overall...

Edges taper towards point. For filing and sharpening saws. Points are left uncut. Instead of having a tang, both ends are tapered. They are used for sharpening saws having a 60° angle. The teeth are cut from each end towards the centre. Manufactured...

Designed for general use and best suited to softer materials such as wood, plastics, fillers, leather and lead. • Handle Material No handle included• Type of Cut Bastard• Overall...

Replacement club or lump hammer shaft. Also suitable for hammers with a similar eye such as: Scutch, Walling, Brick and Masons. Made from grade A hickory with a waxed finish. Manufactured to BS 3823. • Shaft...

Rectangular - MetricHigh grade mild steel Self colour. Available in square or rectangular sections. Metric manufactured from: BS4235 Part 1 1972 grade steel equivalent to DIN 6885.Length: 300mm.Other sizes available on request. • Width...

Conform to ASME B107.4. & ANSI B107.9M. Made from high quality chrome vanadium steel. Satin finish body with highly polished heads. Offset ends. The wrench will fit over the pipe to give a positive location on the nut. Can be used on hydraulic pipes,...

Conform to ASME B107.4. & ANSI B107.9M. Made from high quality chrome vanadium steel. Satin finish body with highly polished heads. Offset ends. The wrench will fit over the pipe to give a positive location on the nut. Can be used on hydraulic pipes,...

Hardened and precision ground. Conform with DIN 6325.Inch: Sizes 1/16” and 1/8” are manufactured from non-hardened silver steel, 3/16” and above are high quality case hardened mild steel.Tolerances:All sizes = +0.001” +0...

Hardened and precision ground. Conform with DIN 6325.Inch: Sizes 1/16” and 1/8” are manufactured from non-hardened silver steel, 3/16” and above are high quality case hardened mild steel.Tolerances:All sizes = +0.001” +0...

Hardened and precision ground. Conform with DIN 6325.Inch: Sizes 1/16” and 1/8” are manufactured from non-hardened silver steel, 3/16” and above are high quality case hardened mild steel.Tolerances:All sizes = +0.001” +0...

FlatAll Kennedy screwdriver bits have a hardness of 58 - 62HRC. High alloy chrome molybdenum steel for use on hand and power tools.   • Tip Size 3.0• Bit Material Chrome Molybdenum Steel• For Use...

Chrome vanadium steel with a satin finish body and highly polished heads, with a 15° offset.DIN 3110 & BS192:1982.Contents1/8" x 3/16", 3/16" x 1/4", 1/4" x 5/16", 5/16" x 3/8", 3/8" x 7/16", 7/16" x 1/2", 1/2" x 9/16" and 9/16" x 5/8"...

Kennedy combination spanners are manufactured from chrome vanadium steel with a satin finish body and highly polished heads. 15 open jaw angle to shank and ring end offset.Conform to:1/8" - 1/2" - DIN 3113 & BS192:1982.Contents1/8", 3/16", 1/4",...

5% Cobalt Parting-Off Inch.Cut faster, 'stand up' longer and reduce costs. Square and rectangular toolbits supplied with 15° bevelled ends. Parting-off blades supplied with 2° side taper, 10° bevel (top and bottom). • Overall...

InchManufactured from fully hardened carbon steel. Ergonomically designed handle to provide high grip and torque with user comfort. • Handle Material Chrome Vanadium Steel• Tip Material Chrome Vanadium Steel• Tip...

£6.23   Inc VAT (20%) Trade prices available. Apply Here Qty Delivery: 1-2 days Add to Favourites Description Manufactured from chrome vanadium steel with a chrome satin finish body and highly polished heads. 15°...

Range includes 1xD, 1.5xD and 2xD lengths (ISO Metric threads). Our quality inserts are now supplied in packs of 10 or 50. Other sizes and lengths are available on request, please ask for further information. • Thread Form BSP• Insert...

For internal and external edges. • Special Features Internal Deburrer• Compatible Pipe Edge External• Maximum Pipe Capacity 40mm• Type Pipe Deburrer• Minimum Pipe Capacity 3mm

Bi-Hexagon Sockets12 point – side drive design gives a higher torque than normal sockets, grip worn nuts and will not round off existing nuts. All have a ball-retaining groove on each face of the square drive, which ensures a positive fit with...

Bi-Hexagon Sockets12 point - side drive design gives a higher torque than normal sockets, grip worn nuts and will not round off existing nuts. All have a ball-retaining groove on each face of the square drive, which ensures a positive fit with...

InchManufactured from fully hardened carbon steel. Ergonomically designed handle to provide high grip and torque with user comfort.   Tip Material Steel Number of Pieces 1 Tip Type Hex Ball Tip Size 1/8"