EZB002

Edges taper towards front. Applications as for hand files. Preferred where taper allows access into tight corners and angles. For general work on iron, steel, etc.Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b. • Overall...

Fitted with ergonomically designed handles for a comfortable improved grip. Files manufactured from T12 CH-Moly alloy tool steel, hardened and tempered. Supplied in a woven wallet for easy storage.Manufactured to BS498:1990 and American Federal Standard...

Edges taper towards front. Applications as for hand files. Preferred where taper allows access into tight corners and angles. For general work on iron, steel, etc.Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b. • Overall...

Edges taper towards point. For filing and sharpening saws. Points are left uncut. Instead of having a tang, both ends are tapered. They are used for sharpening saws having a 60° angle. The teeth are cut from each end towards the centre. Manufactured...

Designed for general use and best suited to softer materials such as wood, plastics, fillers, leather and lead. • Handle Material No handle included• Type of Cut Bastard• Overall...

Replacement club or lump hammer shaft. Also suitable for hammers with a similar eye such as: Scutch, Walling, Brick and Masons. Made from grade A hickory with a waxed finish. Manufactured to BS 3823. • Shaft...

Rectangular - MetricHigh grade mild steel Self colour. Available in square or rectangular sections. Metric manufactured from: BS4235 Part 1 1972 grade steel equivalent to DIN 6885.Length: 300mm.Other sizes available on request. • Width...

Conform to ASME B107.4. & ANSI B107.9M. Made from high quality chrome vanadium steel. Satin finish body with highly polished heads. Offset ends. The wrench will fit over the pipe to give a positive location on the nut. Can be used on hydraulic pipes,...

Conform to ASME B107.4. & ANSI B107.9M. Made from high quality chrome vanadium steel. Satin finish body with highly polished heads. Offset ends. The wrench will fit over the pipe to give a positive location on the nut. Can be used on hydraulic pipes,...

Hardened and precision ground. Conform with DIN 6325.Inch: Sizes 1/16” and 1/8” are manufactured from non-hardened silver steel, 3/16” and above are high quality case hardened mild steel.Tolerances:All sizes = +0.001” +0...

Hardened and precision ground. Conform with DIN 6325.Inch: Sizes 1/16” and 1/8” are manufactured from non-hardened silver steel, 3/16” and above are high quality case hardened mild steel.Tolerances:All sizes = +0.001” +0...

Hardened and precision ground. Conform with DIN 6325.Inch: Sizes 1/16” and 1/8” are manufactured from non-hardened silver steel, 3/16” and above are high quality case hardened mild steel.Tolerances:All sizes = +0.001” +0...

FlatAll Kennedy screwdriver bits have a hardness of 58 - 62HRC. High alloy chrome molybdenum steel for use on hand and power tools.   • Tip Size 3.0• Bit Material Chrome Molybdenum Steel• For Use...

Chrome vanadium steel with a satin finish body and highly polished heads, with a 15° offset.DIN 3110 & BS192:1982.Contents1/8" x 3/16", 3/16" x 1/4", 1/4" x 5/16", 5/16" x 3/8", 3/8" x 7/16", 7/16" x 1/2", 1/2" x 9/16" and 9/16" x 5/8"...

Kennedy combination spanners are manufactured from chrome vanadium steel with a satin finish body and highly polished heads. 15 open jaw angle to shank and ring end offset.Conform to:1/8" - 1/2" - DIN 3113 & BS192:1982.Contents1/8", 3/16", 1/4",...

5% Cobalt Parting-Off Inch.Cut faster, 'stand up' longer and reduce costs. Square and rectangular toolbits supplied with 15° bevelled ends. Parting-off blades supplied with 2° side taper, 10° bevel (top and bottom). • Overall...

InchManufactured from fully hardened carbon steel. Ergonomically designed handle to provide high grip and torque with user comfort. • Handle Material Chrome Vanadium Steel• Tip Material Chrome Vanadium Steel• Tip...

£6.23   Inc VAT (20%) Trade prices available. Apply Here Qty Delivery: 1-2 days Add to Favourites Description Manufactured from chrome vanadium steel with a chrome satin finish body and highly polished heads. 15°...

For internal and external edges. • Special Features Internal Deburrer• Compatible Pipe Edge External• Maximum Pipe Capacity 40mm• Type Pipe Deburrer• Minimum Pipe Capacity 3mm

Bi-Hexagon Sockets12 point – side drive design gives a higher torque than normal sockets, grip worn nuts and will not round off existing nuts. All have a ball-retaining groove on each face of the square drive, which ensures a positive fit with...

Bi-Hexagon Sockets12 point - side drive design gives a higher torque than normal sockets, grip worn nuts and will not round off existing nuts. All have a ball-retaining groove on each face of the square drive, which ensures a positive fit with...

InchManufactured from fully hardened carbon steel. Ergonomically designed handle to provide high grip and torque with user comfort.   Tip Material Steel Number of Pieces 1 Tip Type Hex Ball Tip Size 1/8"

Suitable for the precise & accurate punching of holes in Steel, Aluminium, Brass, Plastic and Leather.Manufactured from hardened steel delivering 1.2 tons of punch providing smooth piercing with minimum effort resulting in perfect clean cut holes...

Often used in the automotive and aerospace industries.The weight to strength ratio ensures the reliability and accessibility that is important in this type of environment.Made from chrome vanadium steel, fully chrome plated with a mirror finish and...

Spark Resistant HEX Key WrenchAluminium BronzeInch • Material Aluminium Bronze• Overall Length 59mm• Standards Met ISO2936

Suitable for the precise & accurate punching of holes in Steel, Aluminium, Brass, Plastic and Leather.Manufactured from hardened steel delivering 1.2 tons of punch providing smooth piercing with minimum effort resulting in perfect clean cut holes...

5% Cobalt Round Inch.Cut faster, 'stand up' longer and reduce costs. Square and rectangular toolbits supplied with 15° bevelled ends. Parting-off blades supplied with 2° side taper, 10° bevel (top and bottom). • Overall Width 1/8in...

For use with Kennedy grease guns and all other hydraulic grease equipment. • Hydraulic Tool Type Hydraulic Nipple• Material Steel• Thread Size 1/8"x28 BSP(T)

For use with Kennedy grease guns and all other hydraulic grease equipment. • Hydraulic Tool Type Hydraulic Nipple• Material Steel• Overall Length 16mm• Overall Width 17.25mm• Thread...

For use with Kennedy grease guns and all other hydraulic grease equipment. • Hydraulic Tool Type Hydraulic Nipple• Material Steel• Overall Length 19.5mm• Overall Width 18mm• Thread...

For use with Kennedy grease guns and all other hydraulic grease equipment. • Hydraulic Tool Type Hydraulic Nipple• Material Steel• Overall Length 25mm• Overall Width 10mm• Thread...

Inch - Long ArmManufactured from fully hardened carbon steel in accordance with DIN 911 ensuring a quality ductile key with precision square cut ends and accurate AF dimensions to ensure full socket contact. Black finish. • Short Arm...

Inch - Standard LengthManufactured from fully hardened carbon steel in accordance with DIN 911 ensuring a quality ductile key with precision square cut ends and accurate AF dimensions to ensure full socket contact. Black finish. • Short Arm...

InchManufactured from fully hardened carbon steel in accordance with DIN 911. A quality ductile key with precision cut ends and accurate AF dimensional to ensure maximum socket contact. Ball end allows up to 30° work offset. Long arm end is ball...

InchCan be used at angles of up to 25° from the screw head, making them ideal for awkward access areas. Manufactured from hardened carbon steel, available with fluted driver handles, L-wrench pattern or T-handle.   • Tip...

Screwdriver BitsManufactured from high quality chrome vanadium, fully polished finish. Conform to DIN.Overall length: 37mm.Bit length: 19mm.Ideal for assembly and servicing of small precision mechanisms associated with electrical, electronic, ignition...

All Main columns are threaded M8 x 1.25mm and are interchangeable with Kennedy, Oxford, Mitutoyo etc. base units except mini-mag (M6 x 1mm) also suitable for incorporating into special fixtures or threaded pot magnets.Crossbar Assemblies with lug adaptor...

Chrome vanadium steel with a satin finish body and highly polished heads, with a 15° offset.DIN 3110 & BS192:1982.   • Overall Length 156mm • Type Open Ended...

Hardened and precision ground. Conform with DIN 6325.Inch: Sizes 1/16” and 1/8” are manufactured from non-hardened silver steel, 3/16” and above are high quality case hardened mild steel.Tolerances:All sizes = +0.001” +0...

Hardened and precision ground. Conform with DIN 6325.Inch: Sizes 1/16” and 1/8” are manufactured from non-hardened silver steel, 3/16” and above are high quality case hardened mild steel.Tolerances:All sizes = +0.001” +0...