EZB002

InchCan be used at angles of up to 25° from the screw head, making them ideal for awkward access areas. Manufactured from hardened carbon steel, available with fluted driver handles, L-wrench pattern or T-handle. • Tip...

Screwdriver BitsManufactured from high quality chrome vanadium, fully polished finish. Conform to DIN.Overall length: 37mm.Bit length: 19mm.Ideal for assembly and servicing of small precision mechanisms associated with electrical, electronic, ignition...

AFManufactured from chrome vanadium steel with a chrome satin finish body and highly polished heads. 15 open jaw angle to shank and ring end offset. Chrome plated finish to pevent from corosion.Ring head angle - 13°Conform to: 1/4" - 1" AF - DIN 3113...

2 Flute: Regular Series - InchFor optimum performance and maximum swarf removal when plunging, slotting and routing in light alloys, brass, aluminium, non-ferrous and other soft materials. Manufactured to Works Standards.Inch TolerancesDiameter: Over...

Two part cutting Nozzles suitable for Propane. Fits all NM style torches and cutting attachments. Plate thickness refers to mild steel.Please note images of products are for representation purposes only. Whilst every care is taken to provide accurate...

Industrial aluminium oxide sanding paper is "glue" bonded and suitable for use with hand sanding blocks and orbital sanders. • Overall Width 93mm• Abrasive Material Aluminium Oxide• Overall...

Industrial aluminium oxide sanding paper is "glue" bonded and suitable for use with hand sanding blocks and orbital sanders. • Overall Width 93mm• Abrasive Material Aluminium Oxide• Overall...

Hardened and precision ground. Conform with DIN 6325.Inch: Sizes 1/16” and 1/8” are manufactured from non-hardened silver steel, 3/16” and above are high quality case hardened mild steel.Tolerances:All sizes = +0.001” +0...

Hardened and precision ground. Conform with DIN 6325.Inch: Sizes 1/16” and 1/8” are manufactured from non-hardened silver steel, 3/16” and above are high quality case hardened mild steel.Tolerances:All sizes = +0.001” +0...

Hardened and precision ground. Conform with DIN 6325.Inch: Sizes 1/16” and 1/8” are manufactured from non-hardened silver steel, 3/16” and above are high quality case hardened mild steel.Tolerances:All sizes = +0.001” +0...

Hardened and precision ground. Conform with DIN 6325.Inch: Sizes 1/16” and 1/8” are manufactured from non-hardened silver steel, 3/16” and above are high quality case hardened mild steel.Tolerances:All sizes = +0.001” +0...

Hardened and precision ground. Conform with DIN 6325.Inch: Sizes 1/16” and 1/8” are manufactured from non-hardened silver steel, 3/16” and above are high quality case hardened mild steel.Tolerances:All sizes = +0.001” +0...

Hardened and precision ground. Conform with DIN 6325.Inch: Sizes 1/16” and 1/8” are manufactured from non-hardened silver steel, 3/16” and above are high quality case hardened mild steel.Tolerances:All sizes = +0.001” +0...

Hardened and precision ground. Conform with DIN 6325.Inch: Sizes 1/16” and 1/8” are manufactured from non-hardened silver steel, 3/16” and above are high quality case hardened mild steel.Tolerances:All sizes = +0.001” +0...

Hardened and precision ground. Conform with DIN 6325.Inch: Sizes 1/16” and 1/8” are manufactured from non-hardened silver steel, 3/16” and above are high quality case hardened mild steel.Tolerances:All sizes = +0.001” +0...

Hardened and precision ground. Conform with DIN 6325.Inch: Sizes 1/16” and 1/8” are manufactured from non-hardened silver steel, 3/16” and above are high quality case hardened mild steel.Tolerances:All sizes = +0.001” +0...

Hardened and precision ground. Conform with DIN 6325.Inch: Sizes 1/16” and 1/8” are manufactured from non-hardened silver steel, 3/16” and above are high quality case hardened mild steel.Tolerances:All sizes = +0.001” +0...

hemical and oil-resistant polyethylene liquid measures. Integral dispensing spout resistant to extreme weather conditions. Can be used in conjunction with dispensing spouts listed below.Graduations:1/2ltr - 1/4 and 1/2ltr,1ltr - 1/4, 1/2, 3/4ltr,2ltr -...

Ball Pein HammersFor use with cold chisels, punches, rivets and for shaping metal. Fine grain hardwood shaft.Spark-resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive environments...

With textured slip resistant rubber grip. Shaft and grip combine to dampen the impact transmitted through to the user's hand and wrist. Reduces operator fatigue and the risk of RSI (Repetitive Strain Injury). • Shaft...

With fine grain, forged steel head, hardened and tempered with polished faces. • Shaft Length 305mm• Head Weight 1/2lb• Shaft Material Hickory• Face Diameter 25mm• Special...

Ball pein hammers are manufactured from high-grade drop forged steel fully heat-treated. Ideal for use with cold chisels, punches, rivets and for the shaping of metal. With fine grain, forged steel head, hardened and tempered with polished faces...

Tested to the requirements of BS 876: 1995 (head stamped BS 876). Crack tested and heat treated handles. • Shaft Length 265mm• Head Weight 1/2lb• Shaft Material Hickory• Face...

Conform to: ASME B107.4 & ANSI B107.6. Made from chrome vanadium steel with a highly polished mirror finish. Made to American Federal Standards, giving higher torque therefore improved performance. The wrench will fit over the pipe to give a positive...

Mechanical drop forged, hardened and tempered plated steel. Ideal for releasing seized/damaged nuts • MFR Part No. NS16• Overall Length 110mm• Pressure Application Mechanical• Maximum Nut...

For use where access is limited. With a built-in ratchet mechanism to provide speed and a reversible action which can be achieved by depressing the reversing lever or by simply turning the wrench over. All ratcheting ring wrenches are manufactured from...

For use where access is limited. With a built-in ratchet mechanism to provide speed and a reversible action which can be achieved by depressing the reversing lever or by simply turning the wrench over. All ratcheting ring wrenches are manufactured from...

Heavy duty steel. Used to produce 1/2” and 5/8” concave joints between bricks. • Overall Length 580mm• Overall Width 12 x 16mm• Tool Material Cast Steel• Type Brick Jointer

Range includes 1xD, 1.5xD and 2xD lengths (ISO Metric threads). Our quality inserts are now supplied in packs of 10 or 50. Other sizes and lengths are available on request, please ask for further information. • Thread Form UNF• Insert...

Range includes 1xD, 1.5xD and 2xD lengths (ISO Metric threads). Our quality inserts are now supplied in packs of 10 or 50. Other sizes and lengths are available on request, please ask for further information. • Thread...

Suitable for repairing damaged and worn threads, also ideal for new applications. Ideal for use with alloys and other light materials. Can also be used for converting from metric to inch and vice versa. Insert lengths are 1.5D and other lengths are...

Chrome vanadium steel with a satin finish body and highly polished heads, with a 15° offset.DIN 3110 & BS192:1982.   • Overall Length 266mm• Type Open Ended...

Conform to ASME B107.4 & ANSI B107.9. Made from high quality chrome vanadium steel. Satin finish body with highly polished heads. Offset ends. The wrench will fit over the pipe to give a positive location on the nut. Can be used on hydraulic pipes,...

Chrome vanadium steel* with a satin finish body and highly polished heads, with a 15° offset.DIN 3110: 1/4" x 5/16" to 1 5/16" x 1 5/8" AF.ASME B107.39: 1 7/16" x 1 5/8" to 1 13/16" x 2" AF.*1 7/16" x 1 5/8", 1 1/2" x 1 5/8", 1 11/16" x 1 7/8", 1...

Rectangular - InchHigh grade mild steel. Available in square or rectangular sections.Inch manufactured from: BS46 PART 7 1958 grade steel.Length: 12".Other sizes available on request. • Shape Rectangular• Standards Met BS46...

Bi-Hexagon Sockets12 point – side drive design gives a higher torque than normal sockets, grip worn nuts and will not round off existing nuts. All have a ball-retaining groove on each face of the square drive, which ensures a positive fit with...

Manufactured from chrome vanadium steel with a chrome satin finish body and highly polished heads. 15° open jaw angle to shank and ring end offset.Chrome plated finish to pevent from corosion.Ring head angle - 13°Conform to:1/8" - 1/2" Whitworth...

Square - InchHigh grade mild steel Self colour. Available in square or rectangular sections. Inch manufactured from: BS46 PART 1 1958 grade steel.Length: 12".Other sizes available on request. • Shape Square• Standards...

Chrome vanadium. For using a combination of square drive sockets in the same application.   • Product Type Female/Male Converter • Overall Length 41mm • No. of Teeth N/A • Drive Size 3/8in...

Chrome vanadium. For using a combination of square drive socketry in the same application. • Weight Each 55kg• Product Type Female/Male Converter• Drive Size 3/4in.