EZB002

Double Ended LugChrome vanadium. For connecting two female square drives • Drive Type Square• No. of Teeth N/A• Overall Length 25mm• Number of Pieces 1• Includes Tool only

Bi-Hexagon Sockets12 point - side drive design gives a higher torque than normal sockets, grip worn nuts and will not round off existing nuts. All have a ball-retaining groove on each face of the square drive, which ensures a positive fit with...

AFManufactured from chrome vanadium steel with a chrome satin finish body and highly polished heads. 15 open jaw angle to shank and ring end offset.Chrome plated finish to pevent from corosion.Ring head angle - 13°Conform to:1/4" - 1" AF - DIN 3113...

Industrial aluminium oxide sanding paper is "glue" bonded and suitable for use with hand sanding blocks and orbital sanders. • Overall Width 115mm• Abrasive Material Aluminium Oxide• Overall...

Hardened and precision ground. Conform with DIN 6325.Inch: Sizes 1/16” and 1/8” are manufactured from non-hardened silver steel, 3/16” and above are high quality case hardened mild steel.Tolerances:All sizes = +0.001” +0...

Inch 10 Piece Long Arm SetManufactured from fully hardened carbon steel in accordance with DIN 911 ensuring a quality ductile key with precision square cut ends and accurate AF dimensions to ensure full socket contact. Black finish.Contents: 1/16”...

Metric - 9 PieceSet Contents:1.5 x 45, 2 x 50, 2.5 x 56, 3 x 63, 4 x 70, 5 x 79, 6 x 90, 8 x 100 and 10 x 112mm.Inch - 10 PieceSet Contents:1/16" x 1 3/4", 5/64" x 1 7/8", 3/32" x 2", 1/8" x 2 1/4", 5/32" x 2 1/2", 3/16" x 2 3/4", 7/32" x 3", 1/4" x 3...

With all steel, hardened and tempered bodies, solid construction, hardened ground jaws and knurled adjustable handles for extra grip. Straight handle design provides greater leverage, especially when using larger diameter taps. Tap sizes to ISO 529.Tap...

With all steel, hardened and tempered bodies, solid construction, hardened ground jaws and knurled adjustable handles for extra grip. Straight handle design provides greater leverage, especially when using larger diameter taps. Tap sizes to ISO 529...

Metric - 8 Piece Set Contents: 1.5, 2, 2.5, 3, 4, 5, 5.5 and 6mm.Inch - 8 Piece Set Contents: 1/16”, 5/64”, 3/32”, 1/8”, 5/32”,3/16”, 7/32” and 1/4”.  Handle Material Chrome Vanadium...

Manufactured from hardened steel with a satin finish. An ideal way to quickly measure the diameter of drills and steel wire. • Type Drill Gauge• Surface Finish Satin

Inch - Long ArmManufactured from fully hardened carbon steel in accordance with DIN 911 ensuring a quality ductile key with precision square cut ends and accurate AF dimensions to ensure full socket contact. Black finish. • Short Arm...

Inch - Standard LengthManufactured from fully hardened carbon steel in accordance with DIN 911 ensuring a quality ductile key with precision square cut ends and accurate AF dimensions to ensure full socket contact. Black finish. • Short Arm...

InchManufactured from fully hardened carbon steel in accordance with DIN 911. A quality ductile key with precision cut ends and accurate AF dimensional to ensure maximum socket contact. Ball end allows up to 30° work offset. Long arm end is ball...

InchCan be used at angles of up to 25° from the screw head, making them ideal for awkward access areas. Manufactured from hardened carbon steel, available with fluted driver handles, L-wrench pattern or T-handle.   • Tip...

Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners. Manufactured to DIN 7444...

ParallelHave nickel chrome molybdenum steel blades, hardened and tempered. Chrome plated, with swivel tops which resist oil and acid. Supplied in plastic cases. Ideal for jewellers and watchmakers.   • Tip...

HSS-Co Heavy Duty Straight Shank Jobber DrillsMetricHeavy duty drill made of 5% cobalt material with excellent heat resistance. To drill steels with tensile strength up to 1,400 N/mm², very hard bronze, stainless steels as well as heat and acid...

Model TCC 008Coaxial crimp tool with full cycle ratcheting crimp frame and adjustable crimp pressure. Carbon steel jaws with a chemically blacked finish and PVC handles.Suitable for RG cable: 6, 58, 59 and 62.Hexagonal crimp of 1.72, 2.5, 5.4, 6.48 and 8...

AFA heavy duty range designed to cope with the demands of industrial agricultural machinery and heavy plant, static or mobile. All Kennedy Professional sockets have a unique double knurl to give a high grip essential for a quick tool change when hands...

Forged and hardened steel. Flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners. To DIN 133. • Standards Met DIN 133• Overall Length 225mm• Material Hardened Steel

AFManufactured from chrome vanadium steel with a chrome satin finish body and highly polished heads. 15 open jaw angle to shank and ring end offset.Chrome plated finish to pevent from corosion.Ring head angle - 13°Conform to:1/4" - 1" AF - DIN 3113...

Chrome vanadium steel* with a satin finish body and highly polished heads, with a 15° offset.DIN 3110: 1/4" x 5/16" to 1 5/16" x 1 5/8" AF.ASME B107.39: 1 7/16" x 1 5/8" to 1 13/16" x 2" AF.*1 7/16" x 1 5/8", 1 1/2" x 1 5/8", 1 11/16" x 1 7/8", 1...

AFA heavy duty range designed to cope with the demands of industrial agricultural machinery and heavy plant, static or mobile. All Kennedy Professional sockets have a unique double knurl to give a high grip essential for a quick tool change when hands...

Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners. Manufactured to DIN 7444...

Forged and hardened steel. Flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners. To DIN 133. • Standards Met DIN 133• Overall Length 215mm• Material Hardened Steel

AFManufactured from chrome vanadium steel with a chrome satin finish body and highly polished heads. 15 open jaw angle to shank and ring end offset.Chrome plated finish to pevent from corosion.Ring head angle - 13°Conform to:1/4" - 1" AF - DIN 3113...

HSS-Co Heavy Duty Straight Shank Jobber DrillsMetricHeavy duty drill made of 5% cobalt material with excellent heat resistance. To drill steels with tensile strength up to 1,400 N/mm², very hard bronze, stainless steels as well as heat and acid...

HexagonAll Kennedy screwdriver bits have a hardness of 58 - 62HRC. High alloy chrome molybdenum steel for use on hand and power tools. • Tip Size 1.5• Bit Material Chrome Molybdenum Steel• For Use With Hand...

Short Series - Metric - TiCN CoatedKennedy KC3 throwaway 3* flute endmills are manufactured HSS-Co 5% making them much tougher than HSS. This means that Kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity...

Metric - Long ArmManufactured from fully hardened carbon steel in accordance with DIN 911 ensuring a quality ductile key with precision square cut ends and accurate AF dimensions to ensure full socket contact. Black finish. • Short Arm...

Short Series - MetricKennedy KC3 throwaway 3* flute endmills are manufactured HSS-Co 5% making them much tougher than HSS. This means that Kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity.Suitable for slot...

Metric - Standard LengthManufactured from fully hardened carbon steel in accordance with DIN 911 ensuring a quality ductile key with precision square cut ends and accurate AF dimensions to ensure full socket contact. Black finish. • Short Arm...

MetricManufactured from fully hardened carbon steel in accordance with DIN 911. A quality ductile key with precision cut ends and accurate AF dimensional to ensure maximum socket contact. Ball end allows up to 30° work offset. Long arm end is ball...

Manufactured from chrome vanadium steel with a nickel plating. Manufactured to ISO2936 (formerly DIN 911L). Set supplied in an indexed plastic holder. Individual hexagon key slots help to instantly identify missing drivers.   • Tip...

MetricCan be used at angles of up to 25° from the screw head, making them ideal for awkward access areas. Manufactured from hardened carbon steel, available with fluted driver handles, L-wrench pattern or T-handle. • Tip...

Spark Resistant HEX Key WrenchAluminium BronzeMetric**Image for illustration purpose only • Material Aluminium Bronze• Overall Length 59mm• Standards Met ISO2936• Diameter 1.5mm

Chrome vanadium steel with a nickel plating. Manufactured to ISO2936 (formerly DIN 911L). Supplied in an indexed plastic holder. • Short Arm Length 14mm• Handle Material Chrome Vanadium Steel• Tip...

4 Flute: Regular Series - MetricCentre cutting as standard. For maximum strength when milling harder materials where rapid swarf removal is not needed. 4 flute milling cutters have one of the strongest tooth structures available in solid cutters...

3 Flute: Regular Series - MetricCentre cutting as standard. Offer a combination of advantages achieved with two and four flutes giving profile and peripheral milling capability in addition to slotting and plunging. Manufactured to Works Standards.Metric...