Hand Tools

StandardManufactured from high quality chrome vanadium with a fully polished finish. All with knurled ‘finger grip’. • Additional Features Knurled 'finger grip'• Drive Type Square• No. of...

Steel blade and cushioned handle, used for stripping cable and wire.Overall length: 150mm. • Overall Length 150mm• Type Wire Stripper• Includes N/A• Compatible Wire Type Electricity...

Bi-hexagon. (12 point). This range of 1" (25mm) series sockets is the ultimate for high torque hand applications. The Bi-hexagon design gives strength and reliability under heavy loads. Used extensively in heavy plant, rail, shipyard and oil rig...

Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners. Manufactured to DIN 7444...

1” Drive Inch Size, Standard Length, 6-PointConform to: SAE, USA Federal Standard GGG-W-660A.Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings. • Material Chrome...

1” Drive Inch Size, Deep Length, 6-PointConform to: SAE, USA Federal Standard GGG-W-660A.Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings.   • Drive End...

AFManufactured from chrome vanadium steel with a chrome satin finish body and highly polished heads. 15 open jaw angle to shank and ring end offset.Chrome plated finish to pevent from corosion.Ring head angle - 13°Conform to:1/4" - 1" AF - DIN 3113...

CrosspointSpark-resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive environments. They resist the sparks that a standard tool could potentially create when striking hard surfaces...

Spark Resistant ScrewdriverPozidriveAluminium Bronze**Image for illustration purpose only • Material Aluminium Bronze• Blade Length 50mm• Tip Size No.0mm• Tip Type Pozi

A robust measuring tool manufactured from hard rolled brass with permanent black figures and graduations.Flexible and rustless, it has a 19mm wide blade and countersunk fixing holes. • MFR Part No. MI-1600• Hook Type No...

hemical and oil-resistant polyethylene liquid measures. Integral dispensing spout resistant to extreme weather conditions. Can be used in conjunction with dispensing spouts listed below.Graduations:1/2ltr - 1/4 and 1/2ltr,1ltr - 1/4, 1/2, 3/4ltr,2ltr -...

Chemical and oil resistant polyethylene liquid measures.Graduations:1/4 ltr - 10ml,1/2 ltr - 10ml,1ltr - 10ml,2ltr - 20ml,3ltr - 50ml,5ltr - 100ml. • Capacity 1L• Graduations 1l - 10mlml• Tool/Supply...

Ball Pein HammersFor use with cold chisels, punches, rivets and for shaping metal. Fine grain hardwood shaft.Spark-resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive environments...

Ball Pein HammersFor use with cold chisels, punches, rivets and for shaping metal. Fine grain hardwood shaft.Spark-resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive environments...

With textured slip resistant rubber grip. Dampens the impact transmitted through to the user's hand and wrist. • Shaft Length 275mm• Head Weight 1lb• Shaft Material Steel• Face...

With fine grain, forged steel head, hardened and tempered with polished faces. • Shaft Length 310mm• Head Weight 1lb• Shaft Material Hickory• Face Diameter 25mm• Special...

Ball pein hammers are manufactured from high-grade drop forged steel fully heat-treated. Ideal for use with cold chisels, punches, rivets and for the shaping of metal. With fine grain, forged steel head, hardened and tempered with polished faces...

With textured slip resistant rubber grip. Shaft and grip combine to dampen the impact transmitted through to the user's hand and wrist. Reduces operator fatigue and the risk of RSI (Repetitive Strain Injury). • Shaft...

Tested to the requirements of BS 876: 1995 (head stamped BS 876). Crack tested and heat treated handles. • Shaft Length 310mm• Head Weight 1lb• Shaft Material Hickory• Face...

Spark Resistant Sledge HammerAluminium Bronze**Image for illustration purpose only • Head Material Aluminium Bronze• Overall Length 400mm• Hammer Type Sledge Hammer

Machinists hammers suitable for use on metal. Manufactured to European DIN 1041 standard. • Overall Length 360mm• Shaft Material Wood• Head Material Drop Forged Steel• Face...

BA. Conform to BS 1842 : 1952.15° Head Angle   • Overall Length 67mm • Type Open Ended Spanner • Finish/Coating Satin • Single or Double End Double End

• Grips nuts and bolts which are up to 95% rounded off.• Will not damage new, worn or rusted nuts and bolts.• Fits a wide range Metric, UNC, UNF, BSW, BSF and E-Torx® sizes.• Unique 'Double-Knurl' for high grip.• Chrome...

• Grips nuts and bolts which are up to 95% rounded off.• Will not damage new, worn or rusted nuts and bolts.• Fits a wide range Metric, UNC, UNF, BSW, BSF and E-Torx® sizes.• Unique 'Double-Knurl' for high grip.• Chrome...

Double-EndedMade from chrome vanadium steel with a black oxidised finish. Conform to DIN 895. • Overall Length 205mm• Type Open Ended Spanner• Finish/Coating Black Oxide• Single or Double...

Chrome vanadium steel. Suitable for heavy-duty construction applications. Ratchet action for use in confined spaces. Reversible head has two internal bi-hexagon sizes. Podger wrenches have tapered handle for alignment of fixing holes on jigs and...

Double-EndedMade from chrome vanadium steel with a black oxidised finish. Conform to DIN 895. • Overall Length 195mm• Type Open Ended Spanner• Finish/Coating Black Oxide• Single or Double...

For insertion and removal of fasteners and fixings using 1/2" square drive tooling. Made from chrome vanadium steel, fully chrome plated with a mirror finish and aluminium-free. All have ball retaining groove on each face of the square drive. Conform to...

MetricChrome vanadium steel (except * which are made from drop forged carbon steel) with a satin finish body and highly polished heads, with a 15° offset.DIN 3110: 4 x 5mm to 32 x 36mm.ASME B107.39: 36 x 41mm to 46 x 50mm* 36 x 41, 41 x 46, 46 x 50mm...

MetricChrome vanadium steel (except * which are made from drop forged carbon steel) with a satin finish body and highly polished heads, with a 15° offset.DIN 3110: 4 x 5mm to 32 x 36mm.ASME B107.39: 36 x 41mm to 46 x 50mm* 36 x 41, 41 x 46, 46 x 50mm...

Made from chrome vanadium steel with a satin finish body and highly polished heads, with double ended closed jaw bi-hexagon offset. Conform to DIN 838.   • Material Chrome Vanadium Steel • Number of...

MetricChrome vanadium steel (except * which are made from drop forged carbon steel) with a satin finish body and highly polished heads, with a 15° offset.DIN 3110: 4 x 5mm to 32 x 36mm.ASME B107.39: 36 x 41mm to 46 x 50mm* 36 x 41, 41 x 46, 46 x 50mm...

Single-EndedMade from chrome vanadium steel with a black oxidised finish. Conform to DIN 894. • Overall Length 170mm• Type Open Ended Spanner• Finish/Coating Black Oxide• Single or Double...

Socket sizes: 17 and 19mm.Colour coded for easy identification. Can be used with retainer rings or pins. • Socket End Diameter 27mm• Socket Size 19mm• Socket Depth Standard• Bit...

Sockets12 point bi-hexagon.Spark-resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive environments. They resist the sparks that a standard tool could potentially create when striking...

1/2" Sq. Dr. Spark Resistant SocketBeryllium Copper**Image for illustration purpose only • Material Beryllium Copper• Standards Met DIN3120• Square Drive 1/2in.• Diameter 19mm• Number...

Sockets12 point bi-hexagon.Spark-resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive environments. They resist the sparks that a standard tool could potentially create when striking...

Single Open End SpannersSpark-resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive environments. They resist the sparks that a standard tool could potentially create when striking...

Ring End Slogging WrenchWith flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.Spark-resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive...

Combination SpannersSpark-resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive environments. They resist the sparks that a standard tool could potentially create when striking hard...