Hand Tools

InchCan be used at angles of up to 25° from the screw head, making them ideal for awkward access areas. Manufactured from hardened carbon steel, available with fluted driver handles, L-wrench pattern or T-handle.   • Tip...

Screwdriver BitsManufactured from high quality chrome vanadium, fully polished finish. Conform to DIN.Overall length: 37mm.Bit length: 19mm.Ideal for assembly and servicing of small precision mechanisms associated with electrical, electronic, ignition...

With fine grain, forged steel head, hardened and tempered with polished faces. • Shaft Length 250mm• Head Weight 1/4lb• Shaft Material Hickory• Face Diameter 13mm• Special...

Ball pein hammers are manufactured from high-grade drop forged steel fully heat-treated. Ideal for use with cold chisels, punches, rivets and for the shaping of metal. With fine grain, forged steel head, hardened and tempered with polished faces...

Tested to the requirements of BS 876: 1995 (head stamped BS 876). Crack tested and heat treated handles. • Shaft Length 255mm• Head Weight 1/4lb• Shaft Material Hickory• Face...

Made from chrome vanadium steel with a satin finish body and highly polished heads, with double ended closed jaw bi-hexagon offset. Conform to DIN 838.Sets1/4" x 5/16", 3/8" x 7/16", 1/2" x 9/16", 5/8" x 11/16" and 3/4" x 7/8"...

Chrome vanadium steel with a satin finish body and highly polished heads, with a 15° offset.DIN 3110.Contents1/4" x 5/16", 3/8" x 7/16", 1/2" x 9/16", 5/8" x 11/16" and 3/4" x 7/8".   • Material Chrome Vanadium...

Made from chrome vanadium steel with a satin finish body and highly polished heads, with double ended closed jaw bi-hexagon offset. Conform to DIN 838.Contents1/4" x 5/16", 5/16" x 3/8", 3/8" x 7/16", 7/16" x 1/2", 1/2" x 9/16", 9/16" x 5/8", 5/8" x...

Chrome vanadium steel with a satin finish body and highly polished heads, with a 15° offset.DIN 3110.Contents1/4" x 5/16", 5/16" x 3/8", 3/8" x 7/16", 7/16" x 1/2", 1/2" x 9/16", 9/16" x 5/8", 5/8" x 11/16", 11/16" x 3/4", 3/4" x 7/8" and 15/16" x 1"...

Kennedy Combination Spanners Are Manufactured From Chrome Vanadium Steel With A Satin Finish Body And Highly Polished Heads. 15 Open Jaw Angle To Shank And Ring End Offset. Conform To: 1/4 Inch - 1 Inch, Af - Din 3113. 11/16 Inch - 2 Inch, Af -...

Manufactured from chrome vanadium steel with highly polished mirror finish. Mirror finish prevents oil and dirt from adhering to the spannermaking for easier cleaning and preventing rust. Long reach, wall drive. Conform with ANSI B107.6.Contents1/4",...

For use where access is limited. With a built-in ratchet mechanism to provide speed and a reversible action which can be achieved by depressing the reversing lever or by simply turning the wrench over. All ratcheting ring wrenches are manufactured from...

For use where access is limited. With a built-in ratchet mechanism to provide speed and a reversible action which can be achieved by depressing the reversing lever or by simply turning the wrench over. All ratcheting ring wrenches are manufactured from...

AFManufactured from high quality steel tube. Zinc plated for corrosion resistance, each supplied with tommy bar. • Spanner Size 1/4in. x 5/16in.• Type Box Spanner• Number of...

InchManufactured from fully hardened carbon steel. Ergonomically designed handle to provide high grip and torque with user comfort. • Handle Material Chrome Vanadium Steel• Tip Material Chrome Vanadium Steel• Tip...

5/16" hexagon shank with Desoutter style ball locator. For use with insert bits. • For Use With Insert Bits• Overall Length 46mm• Shank Shape Hex

Conform to ASME B107.4. Made from high quality chrome vanadium steel. Satin finish body with highly polished heads. Offset ends. The wrench will fit over the pipe to give a positive location on the nut. Can be used on hydraulic pipes, brake pipes etc...

With all steel, hardened and tempered bodies, solid construction, hardened ground jaws and knurled adjustable handles for extra grip. Straight handle design provides greater leverage, especially when using larger diameter taps. Tap sizes to ISO 529...

Made from chrome vanadium steel with a satin finish body and highly polished heads, with double ended closed jaw bi-hexagon offset. Conform to BS 3555 : 1998.   • Material Chrome Vanadium Steel • Number of...

Chrome vanadium steel with a satin finish body and highly polished heads, with a 15° offset.DIN 3110 & BS192:1982.   • Overall Length 188mm • Type Open Ended...

Chrome vanadium steel* with a satin finish body and highly polished heads, with a 15° offset.DIN 3110: 1/4" x 5/16" to 1 5/16" x 1 5/8" AF.ASME B107.39: 1 7/16" x 1 5/8" to 1 13/16" x 2" AF.*1 7/16" x 1 5/8", 1 1/2" x 1 5/8", 1 11/16" x 1 7/8", 1...

Bi-Hexagon Sockets12 point - side drive design gives a higher torque than normal sockets, grip worn nuts and will not round off existing nuts. All have a ball-retaining groove on each face of the square drive, which ensures a positive fit with...

Manufactured from chrome vanadium steel with a chrome satin finish body and highly polished heads. 15° open jaw angle to shank and ring end offset.Chrome plated finish to pevent from corosion.Ring head angle - 13°Conform to:1/8" - 1/2" Whitworth...

InchManufactured from fully hardened carbon steel. Ergonomically designed handle to provide high grip and torque with user comfort.   Tip Material Steel Number of Pieces 1 Tip Type Hex Ball Tip Size 1/4"

Chrome vanadium. For using a combination of square drive sockets in the same application.   • Product Type Female/Male Converter • Overall Length 37mm • No. of Teeth N/A • Drive Size 3/8in...

Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings. • Overall Length 50mm• Material Chrome Molybdenum• Drive Size 1/4in...

Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings. • Overall Length 100mm• Material Chrome Molybdenum• Drive Size 1/4in...

Hex Bit AdaptorChrome vanadium. Converts square drive tooling to use hexagon bits.   • Drive Type Square • Socket Type Bit Adaptor • Bit Length 25mm • Number of...

Made from steel, bright chrome plated and can be fixed or loose in a toolbox, or fitted to a bench or wall. Can be used with any size square drive socket.   • Drive Type Square • Number of...

Double Ended LugChrome vanadium. For connecting two female square drives • Drive Type Square• No. of Teeth N/A• Overall Length 25mm• Number of Pieces 1• Includes Tool only

Often used in the automotive and aerospace industries.The weight to strength ratio ensures the reliability and accessibility that is important in this type of environment.Made from chrome vanadium steel, fully chrome plated with a mirror finish and...

Socket rails and socket clips combined together. • Drive Type Square• No. of Teeth N/A• Overall Length 220mm• Number of Pieces 1• Includes 1 x Socket Rail

Socket rails and socket clips combined together. • Drive Type Square• No. of Teeth N/A• Overall Length 420mm• Number of Pieces 1• Includes 1 x Socket Rail

Ideal for glue, paste and paint. Plastic handle. • Brush Width 1/4in.• Bristle Shape Flat

Often used in the automotive and aerospace industries.The weight to strength ratio ensures the reliability and accessibility that is important in this type of environment.Made from chrome vanadium steel, fully chrome plated with a mirror finish and...

Contoured grip plastic grip handle for improved comfort, control and higher torque. In-handle storage of up to six bits. Magnetic bit retention.RatchetSwitchable forward, reverse and fixed positive industrial quality ratchet action. Bright finish chrome...

11 piece 1/4" hexagon bits. Chrome vanadium steel blade with moulded dual grip handle designed for improved user comfort allowing more torque to be applied.Switchable forward, reverse and fixed positive industrial quality ratchet action. Bright finish...

Chrome vanadium with polished finish. Easy to operate with thumb-lever reverse switch. 1/4" hex. direct drive for use with standard insert bits.Included in the Kennedy 39 piece Socket and Screwdiver Bit Set (582-791)   • Additional...

Contoured grip plastic grip handle for improved comfort, control and higher torque. In-handle storage of up to six bits. Magnetic bit retention.RatchetSwitchable forward, reverse and fixed positive industrial quality ratchet action. Bright finish chrome...

Square section mechanics' pattern handle. Suitable for use with 1/4" hexagon driver bits etc. Hexagonal blade also allows the application of a spanner for high torque.   • Handle Length 100mm• Bit Type...