Hand Tools

With fine grain, forged steel head, hardened and tempered with polished faces. For light applications. • Shaft Length 310mm• Shaft Material Hickory• Face Diameter 13mm• Special Features Polished...

HexagonAll Kennedy screwdriver bits have a hardness of 58 - 62HRC. High alloy chrome molybdenum steel for use on hand and power tools. • Tip Size 4.0• Bit Material Chrome Molybdenum Steel• For Use With Hand...

HexagonAll Kennedy screwdriver bits have a hardness of 58 - 62HRC. High alloy chrome molybdenum steel for use on hand and power tools.   • Tip Size 4.0 • Bit Material Chrome Molybdenum Steel • For Use...

Chrome vanadium steel (except * which are made from drop forged carbon steel) with a satin finish body and highly polished heads, with a 15° offset.DIN 3110: 4 x 5mm to 32 x 36mm.ASME B107.39: 36 x 41mm to 46 x 50mm* 36 x 41, 41 x 46, 46 x 50mm Made...

For insertion and removal of fasteners and fixings using 1/2" square drive tooling. Made from chrome vanadium steel, fully chrome plated with a mirror finish and aluminium-free. All have ball retaining groove on each face of the square drive. Conform to...

Manufactured from chrome vanadium steel. Used for punching out pins and dowels. • Handle Material Chrome Vanadium• Compatible Cutting Material Mild Steel• Tip Material Chrome Vanadium

Ideal for assembly and servicing of small precision mechanisms associated with electrical, electronic, ignition and refrigeration work. All bi-hexagon unless stated.Double knurl feature gives a high grip which is essential for a quick tool change when...

Screwdriver BitsManufactured from high quality chrome vanadium, fully polished finish. Conform to DIN.Overall length: 37mm.Bit length: 19mm.Ideal for assembly and servicing of small precision mechanisms associated with electrical, electronic, ignition...

Manufactured from chrome vanadium steel. Used for aligning holes in jigs and fixtures etc. • Handle Material Chrome Vanadium• Compatible Cutting Material Mild Steel• Tip Material Chrome Vanadium

1/4" Square DriveConform to DIN3124.The Ken-Grip® socket offers a new standard of performance with the ability to grip up to 95% of a rounded fastener. It has a unique patented design that grips even worn and rusted fasteners without damaging them...

Often used in the automotive and aerospace industries. The weight to strength ratio ensures the reliability and accessibility that is important in this type of environment. Made from chrome vanadium steel, fully chrome plated with a mirror finish and...

Screwdriver BitsManufactured from high quality chrome vanadium, fully polished finish. Conform to DIN.Overall length: 37mm.Bit length: 19mm.Ideal for assembly and servicing of small precision mechanisms associated with electrical, electronic, ignition...

Spark Resistant Hex Key WrenchBeryllium CopperMetric**Image for illustration purpose only • Overall Length 65mm• Material Beryllium Copper• Size 4mm• Standards Met ISO2936

Spark Resistant HEX Key WrenchAluminium BronzeMetric**Image for illustration purpose only • Material Aluminium Bronze• Overall Length 65mm• Standards Met ISO2936• Diameter 4mm

Available in a range of variations and specifications. Crafted from high quality Chrome Molybdenum with a square drive and 6 points. Also features laser etched markings. Finished with a black oxide coat.Features and Benefits• Made from chrome...

Manufactured from chrome vanadium steel. Used for punching out pins and dowels. • Handle Material Chrome Vanadium• Compatible Cutting Material Aluminium• Tip Material Chrome Vanadium

Ideal for driving tight fitting pins out of mechanical assemblies or realigning holes to fit dowel pins. Manufactured from hardened and tempered steel. Fitted with an air grip handle that absorbs vibration as well as deflecting wayward hammer blows...

Ideal for assembly and servicing of small precision mechanisms associated with electrical, electronic, ignition and refrigeration work. All bi-hexagon unless stated.Double knurl feature gives a high grip which is essential for a quick tool change when...

Double faced sledge hammers are fully forged and heat-treated. Ideal for use on spikes, stakes, cold chisels and hardened nails. They are available with a hickory or fibreglass shaft.Hickory ShaftWith fine grain, forged steel head, hardened and tempered...

Double faced sledge hammers are fully forged and heat-treated. Ideal for use on spikes, stakes, cold chisels and hardened nails. They are available with a hickory or fibre glass shaft.Fibre glass Shaft (BS 876 Sledge Hammers)Dampens the impact...

Club (or lump) hammers are fully forged and heat treated with flat face and chamfered edge for use with cold chisels, brick bolsters, star drills and masonry nails.Hickory ShaftWith fine grain, forged steel head, hardened and tempered with polished faces...

Club (or lump) hammers are fully forged and heat treated with flat face and chamfered edge for use with cold chisels, brick bolsters, star drills and masonry nails.Fibreglass ShaftWith textured slip resistant rubber grip. Shaft and grip combine to dampen...

Club (or lump) hammers are fully forged and heat treated with flat face and chamfered edge for use with cold chisels, brick bolsters, star drills and masonry nails.Hickory Shaft Club Hammers BS 876Tested to the requirements of BS 876 : 1981 (head stamped...

BA. Conform to BS 1842 : 1952.15° Head Angle   • Overall Length 63mm • Type Open Ended Spanner • Finish/Coating Satin • Single or Double End Double End

1" drive impact socket that's made from chrome molybdenum alloy steel with a black oxidised finish. The socket is clearly marked making it easy to identify for a quicker selection. Used for turning nuts onto bolts. • Socket...

Manufactured from heavy gauge steel, painted finish with impact resistant transparent polypropylene drawers, allowing contents to be viewed when the drawer is closed. The lip on the rear of the drawer allows it to be opened fully without falling out. The...

SG ductile cast iron heads and slides, bars are manufactured from bright drawn steel. Main screw and handles are made from high grade steel. • Clamp Height 60mm• Head Material Cast Iron• Bar...

Heavy-Duty - For more industrial applications.Jaws are serrated in the opposite direction to ensure a secure grip. Cast iron frame, drop forged handles and jaws. All moving parts are heat treated. Used mainly in the plumbing industry for gripping pipes...

Lightweight aluminium. As robust as cast iron wrenches but 40% lighter. I-beam handle design. • Protection Features 40% Lighter• Capacity 140mm• Type Pipe Wrench• Standards...

3/4" drive impact socket that's made from chrome molybdenum alloy steel with a black oxidised finish. The socket is clearly marked making it easy to identify for a quicker selection. Used for turning nuts onto bolts. • Socket Type Hex...

Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings. • Socket Size 47mm• Material Chrome Molybdenum Steel• Drive Type Square• Drive End...

  Manufactured from high quality chrome molybdenum steel with a black oxidized finish and permanent laser etched markings. Available in a range of metric sizes each 3/4in. square drive socket has six points on the hex end. Features and...

Kennedy Professional Dual Action Quick Clamps are designed for use one handed for speed and convenience. The pistol grip handle houses a ratchet clamping mechanism that incrementally applies clamping force when you pull the trigger. To release or...

Manufactured from ceramic ferrite material set in a mild steel shell. Suitable for holding machine tool accessories with M6 threads or building into jigs. Supplied with J bolt for easy release. • Overall Height 10...

Standard Sockets with Screwdriver BitsSockets: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14mm.AF Sockets: 3/16”, 7/32”, 1/4”, 5/16”, 11/32”, 3/8”, 7/16”, 1/2”.Screwdriver Bits: Slotted 4, 5.5mm...

Standard & Deep Sockets with Screwdriver BitsSockets: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14mm.Deep Sockets: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14mm.Screwdriver Bits: Slotted 4, 5.5, 7mm. Crosspoint No.1, No.2, No.3. Hex 3, 4, 5, 6,...

Double-EndedMade from chrome vanadium steel with a black oxidised finish. Conform to DIN 895. • Overall Length 420mm• Type Open Ended Spanner• Finish/Coating Black Oxide• Single or Double...

MetricChrome vanadium steel (except * which are made from drop forged carbon steel) with a satin finish body and highly polished heads, with a 15° offset.DIN 3110: 4 x 5mm to 32 x 36mm.ASME B107.39: 36 x 41mm to 46 x 50mm* 36 x 41, 41 x 46, 46 x 50mm...