Precision & Laboratory Equipment

Available in a range of sizes, this digital caliper is coolant, water and dust proof to IP67 level. It has a large LCD display, fast response speed, dual readout (mm/inch) and can be used for inside, outside, depth and step measuring. Also enables...

Manufactured to BS EN ISO 3650.Available in two grades:Grade 2: For workshop use.Grade 1: For inspection use.Many intermediate sizes to .001mm increments are also available from stock.Inch sizes available on request - many sizes from stock...

Manufactured to BS EN ISO 3650.Available in two grades:Grade 2: For workshop use.Grade 1: For inspection use.Many intermediate sizes to .001mm increments are also available from stock.Inch sizes available on request - many sizes from stock...

Fitted as standard to KEN- 333-2030K, - 2050K and - 2110K two magnetic faces, bottom and back face. Large vee for curved surfaces.Threaded: M8 x 1.25mm.Base dimensions: 60 x 50 x 55mm.Magnetic pull: 50kg...

Enamelled Frame And Tungsten Carbide Tipped Anvils. Manufactured To Bs 870. Supplied In A Durable Plastic Case. Flatness: 0.6mm. Parallelism: (2 + L/100) µm (Fraction Rounded Down). Instrumental Error: ±(1 + L/75) µm (Fraction Rounded Up). L =...

Manufactured to BS EN ISO 3650.Available in two grades:Grade 2: For workshop use.Grade 1: For inspection use.Many intermediate sizes to .001mm increments are also available from stock.Inch sizes available on request - many sizes from stock...

Manufactured to BS EN ISO 3650.Available in two grades:Grade 2: For workshop use.Grade 1: For inspection use.Many intermediate sizes to .001mm increments are also available from stock.Inch sizes available on request - many sizes from stock...

Manufactured to BS EN ISO 3650.Available in two grades:Grade 2: For workshop use.Grade 1: For inspection use.Many intermediate sizes to .001mm increments are also available from stock.Inch sizes available on request - many sizes from stock...

Manufactured to BS EN ISO 3650.Available in two grades:Grade 2: For workshop use.Grade 1: For inspection use.Many intermediate sizes to .001mm increments are also available from stock.Inch sizes available on request - many sizes from stock...

Manufactured to BS EN ISO 3650.Available in two grades:Grade 2: For workshop use.Grade 1: For inspection use.Many intermediate sizes to .001mm increments are also available from stock.Inch sizes available on request - many sizes from stock...

Manufactured to BS EN ISO 3650.Available in two grades:Grade 2: For workshop use.Grade 1: For inspection use.Many intermediate sizes to .001mm increments are also available from stock.Inch sizes available on request - many sizes from stock...

Manufactured to BS EN ISO 3650.Available in two grades:Grade 2: For workshop use.Grade 1: For inspection use.Many intermediate sizes to .001mm increments are also available from stock.Inch sizes available on request - many sizes from stock...

Manufactured to BS EN ISO 3650.Available in two grades:Grade 2: For workshop use.Grade 1: For inspection use.Many intermediate sizes to .001mm increments are also available from stock.Inch sizes available on request - many sizes from stock...

With four magnetic faces, one at 45°. Heavy duty with universal clamp.Mounts: 1/4" I/D lug, stem/spigot diameter: 1/8", 5/16" and 3/8".Base dimensions: 48 x 44 x 51mm.Column height x diameter: 175 x 12mm.Crossbar length x diameter: 165 x 10.0mm.Clamp...

With four magnetic faces, one at 45°. Heavy duty with universal clamp.Mounts: 1/4” I/D lug, stem/spigot diameter: 1/4”, 5/16”.Base dimensions: 64 x 64 x 76mm.Column height x diameter: 266 x 20mm.Crossbar length x diameter: 200 x 14...

With four magnetic faces, one at 45°. Heavy duty with universal clamp and fine adjustment.Mounts: 1/4” I/D lug, stem/spigot diameter: 1/8”, 1/4”.Base dimensions: 64 x 64 x 76mm.Column height x diameter: 175 x 12mm.Crossbar length x...

With four magnetic faces, one at 45°. Heavy duty with universal clamp.Mounts: 1/4" I/D lug, stem/spigot diameter: 1/8", 5/16" and 3/8".Base dimensions: 48 x 44 x 51mm.Column height x diameter: 175 x 12mm.Crossbar length x diameter: 165 x 10.0mm.Clamp...

Manufactured from hardened and tempered stainless steel. The edges are ground parallel to give the square an exact right angle on both the inside and outside of the stock and blade.Squareness tolerance:75, 100 and 150mm = ±0.030mm.225 and 300mm =...

Manufactured to BS EN ISO 3650.Available in two grades:Grade 2: For workshop use.Grade 1: For inspection use.Many intermediate sizes to .001mm increments are also available from stock.Inch sizes available on request - many sizes from stock...

Manufactured to BS EN ISO 3650.Available in two grades:Grade 2: For workshop use.Grade 1: For inspection use.Many intermediate sizes to .001mm increments are also available from stock.Inch sizes available on request - many sizes from stock...

Manufactured to BS EN ISO 3650.Available in two grades:Grade 2: For workshop use.Grade 1: For inspection use.Many intermediate sizes to .001mm increments are also available from stock.Inch sizes available on request - many sizes from stock...

Manufactured to BS EN ISO 3650.Available in two grades:Grade 2: For workshop use.Grade 1: For inspection use.Many intermediate sizes to .001mm increments are also available from stock.Inch sizes available on request - many sizes from stock...

All main columns are threaded M8 x 1.25mm and are interchangeable with Kennedy, Oxford, Mitutoyo etc. base units except mini-mag (M6 x 1mm) also suitable for incorporating into special fixtures or threaded pot magnets.Medium Duty Fitment - 3 PointFitted...

Replacement styli for Kennedy lever type dial test indicators. Carbide Steel.301-963 - Stylus to suit old style metric types only.301-986 - Stylus to suit new style metric types only.301-986 - Stylus to suit old style imperial types only...

Manufactured to BS EN ISO 3650.Available in two grades:Grade 2: For workshop use.Grade 1: For inspection use.Many intermediate sizes to .001mm increments are also available from stock.Inch sizes available on request - many sizes from stock...

Manufactured to BS EN ISO 3650.Available in two grades:Grade 2: For workshop use.Grade 1: For inspection use.Many intermediate sizes to .001mm increments are also available from stock.Inch sizes available on request - many sizes from stock...

Enamelled Frame And Tungsten Carbide Tipped Anvils. Manufactured To Bs 870. Supplied In A Durable Plastic Case. Flatness: 0.6mm. Parallelism: (2 + L/100) µm (Fraction Rounded Down). Instrumental Error: ±(1 + L/75) µm (Fraction Rounded Up). L =...

Manufactured from hardened and tempered stainless steel. The edges are ground parallel to give the square an exact right angle on both the inside and outside of the stock and blade.Squareness tolerance:75, 100 and 150mm = ±0.030mm.225 and 300mm =...

Manufactured to BS EN ISO 3650.Available in two grades:Grade 2: For workshop use.Grade 1: For inspection use.Many intermediate sizes to .001mm increments are also available from stock.Inch sizes available on request - many sizes from stock...

Manufactured to BS EN ISO 3650.Available in two grades:Grade 2: For workshop use.Grade 1: For inspection use.Many intermediate sizes to .001mm increments are also available from stock.Inch sizes available on request - many sizes from stock...

Manufactured to BS EN ISO 3650.Available in two grades:Grade 2: For workshop use.Grade 1: For inspection use.Many intermediate sizes to .001mm increments are also available from stock.Inch sizes available on request - many sizes from stock...

Manufactured to BS EN ISO 3650.Available in two grades:Grade 2: For workshop use.Grade 1: For inspection use.Many intermediate sizes to .001mm increments are also available from stock.Inch sizes available on request - many sizes from stock...

Manufactured to BS EN ISO 3650.Available in two grades:Grade 2: For workshop use.Grade 1: For inspection use.Many intermediate sizes to .001mm increments are also available from stock.Inch sizes available on request - many sizes from stock...

Manufactured to BS EN ISO 3650.Available in two grades:Grade 2: For workshop use.Grade 1: For inspection use.Many intermediate sizes to .001mm increments are also available from stock.Inch sizes available on request - many sizes from stock...

With two magnetic faces and large vee. Heavy duty with universal clamp.Mounts: 1/4" I/D lug, stem/spigot diameter: 1/4" and 1/8".Column height x dia.:175 x 12mm.Crossbar length x dia.: 165 x 10mm.Clamp ring: 6.35mm.Magnetic pull: 50kg.Base dimensions: 60...

Compact in design, this stand still has a magnetic pull of 30kg with positive switching, fully adjustable joints and slotted 'V' groove. • MFR Part No. NH-HP• Additional Features slotted 'V' groove• Magnetic...

Large stand with two powerful magnetic faces producing a magnetic pull of 80kg.Positive switching, fully adjustable joints and slotted 'V' groove for versatility. • MFR Part No. WCE-8CD• Additional Features adjustable...

With two magnetic faces and large vee. Heavy duty with universal clamp and fine adjustment.Mounts: 1/4" I/D lug, stem/spigot diameter: 4mm, 8mm, 3/8" without bush.Base dimensions: 60 x 50 x 55mm.Column height x dia.: 175 x 12mm.Crossbar length x dia.:...

With two magnetic faces and large vee. Medium duty special clamp with fine adjustment.Mounts: 1/4" I/D lug, dovetail stem/spigotdiameter: 5/16".Base dimensions: 60 x 50 x 55mm.Column height x diameter: Up to 280 x 15mm.Clamp ring: 6.35mm.Magnetic pull:...

Manufactured to BS EN ISO 3650.Available in two grades:Grade 2: For workshop use.Grade 1: For inspection use.Many intermediate sizes to .001mm increments are also available from stock.Inch sizes available on request - many sizes from stock...