SHERWOOD CUTTING TOOLS

HSS 90° Straight Shank Spotting DrillsSeries C520Special drill for accurate and fast spotting on NC machines, jig drills and other capital-intensive boring machines. For countersinking and...

Metric1/2" parallel shank. General purpose drills for light duty work, for drilling steels, cast iron, nickel brass and graphite. Reduced parallel shank 1/2". Point angle: 118°, helix angle:...

Bright Finish - TiN TippedGeneral purpose drills for light duty work, for drilling steels, cast iron, nickel brass and graphite. Reduced parallel shank 1/2".Point angle: 118°, helix angle:...

MetricManufactured to BS 328 : Part 2 : 1986, DIN 333, ISO 2540. • Countersink Angle 60°• Trade Size 14• Radius 8.5mm• Cutting...

Series J100 - MetricGeneral purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium alloy and graphite. Point angle: 118°, helix angle: normal, web...

Series J100 - MetricGeneral purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium alloy and graphite. Point angle: 118°, helix angle: normal, web...

Left hand spiral flute, right hand cutting. Manufactured to BS 328-4.METRIC TOLERANCES (to H7):Diameter: ~ up to 3.00. Tolerance: High +0.008, Low -0.004.Diameter: Over 3.00 ~ up to 6.00. Tolerance:...

Used to produce a close tolerance surface finish in taper holes to allow the fitting of hardened and ground taper pins in the building of jigs, fixtures and dies. Manufactured to BS 328 : Part 4 :...

Series S100 HSS Straight Shank Stub DrillsMetric SizesGeneral purpose drills for use on automatics and turret lathes. Suitable for drilling steels, cast iron, alloy steel and malleable cast iron...

Metric.Used to produce a close tolerance surface finish by hand in almost any environment i.e. on site or in a workshop. Manufactured to BS 328 : Part 4 : 1990 and DIN 206B.METRIC...

Series T100 HSS Taper Shank Drills - MetricTo drill steels with a tensile strength up to 1.000 N/mm2, cast steel, grey cast iron, malleable cast iron, nickel brass and graphite. Point angle:...

Used to produce a close tolerance surface finish by enlarging pre-drilled holes to a finished size. Manufactured from HSS with a 45 bevelled head. Manufactured to BS 328-4.TOLERANCES (to...

HSS-Co Taper Shank Drills - MetricHigh heat resistant drill for drilling alloyed and unalloyed steels and castings with a tensile strength over 800N/mm2. Especially suitable for hot and cold rolled...

Regular Series For Optimum Performance And Maximum Swarf Removal When Plunging, Slotting And Routing In Light Alloys, Brass, Aluminium, Non-Ferrous And Other Soft Materials. Manufactured To Uscti...

Regular Series\nFor optimum performance and maximum swarf removal when plunging, slotting and routing in light alloys, brass, aluminium, non-ferrous and other soft materials. Manufactured to USCTi...

Regular Series For Optimum Performance And Maximum Swarf Removal When Plunging, Slotting And Routing In Light Alloys, Brass, Aluminium, Non-Ferrous And Other Soft Materials. Manufactured To Uscti...

Series T100 HSS Taper Shank Drills - MetricTo drill steels with a tensile strength up to 1.000 N/mm2, cast steel, grey cast iron, malleable cast iron, nickel brass and graphite. Point angle:...

Series J100 - MetricGeneral purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium alloy and graphite. Point angle: 118°, helix angle: normal, web...

Metric1/2" parallel shank. General purpose drills for light duty work, for drilling steels, cast iron, nickel brass and graphite. Reduced parallel shank 1/2". Point angle: 118°, helix angle:...

Series J100 - MetricGeneral purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium alloy and graphite. Point angle: 118°, helix angle: normal, web...

Series J100 - MetricGeneral purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium alloy and graphite. Point angle: 118°, helix angle: normal, web...

Series T100 HSS Taper Shank Drills - MetricTo drill steels with a tensile strength up to 1.000 N/mm2, cast steel, grey cast iron, malleable cast iron, nickel brass and graphite. Point angle:...

HSS-Co Taper Shank Drills - MetricHigh heat resistant drill for drilling alloyed and unalloyed steels and castings with a tensile strength over 800N/mm2. Especially suitable for hot and cold rolled...

Series J100 - MetricGeneral purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium alloy and graphite. Point angle: 118°, helix angle: normal, web...

Series T100 HSS Taper Shank Drills - MetricTo drill steels with a tensile strength up to 1.000 N/mm2, cast steel, grey cast iron, malleable cast iron, nickel brass and graphite. Point angle:...

Long Series E430T.Used for profile milling and producing open slots. Bright finish. Flute type: 30° helix. Manufactured to BS 122 : Part 4 : 1980.Metric Tolerances:Diameter: up to 38.00...

Long Series 5230T.Used for milling keyways and slots. Bright finish. Flute type: 30° helix. Manufactured to BS 122: Part 4: 1980.METRIC TOLERANCES:Diameter: ~ up to 3.00. Tolerance: +0.013 -0...

Short Series E410T.Used for profile milling and producing open slots. Bright finish. Flute type : 30° helix.Manufactured to BS 122 : Part 4 : 1980.METRIC TOLERANCES:Diameter: up to 38.00mm...

Short Series S210T - Metric.Used for milling keyways and slots. Bright finish. Flute type: 30° helix. Manufactured to BS 122: Part 4: 1980.METRIC TOLERANCES:Diameter: ~ up to 3.00. Tolerance: +0...

Regular Series Type 5321T.Bright finish. Flute type: 30° helix. Manufactured to BS 122: Part 4: 1980.Metric Tolerances:Diameter: up to 38.00mm. Tolerance: +0.0630, -0.0130.Diameter: Over 38.00mm...

Long Series Type E431T.Used for profile milling and producing open slots. Bright finish. Flute type: 30° helix.Manufactured to BS 122 : Part 4 : 1980.METRIC TOLERANCES:Diameter: up to 38.00mm...

Long Series Type S231T - MetricBright finish. Flute type: 30° helix. Manufactured to BS 122: Part 4: 1980.Metric TolerancesDiameter: ~ up to 3.00. Tolerance: +0.013 -0.033Diameter: Over 3.00 ~ up...

Regular Series Type E411T.Used for profile milling and producing open slots. Bright finish. Flute type : 30° helix.Manufactured to BS 122 : Part 4 : 1980.Metric Tolerances:Diameter: up to 38.00mm...

Short Series - Metric.Bright finish. Flute type: 30° helix. Manufactured to BS 122: Part 4: 1980.METRIC TOLERANCES:Diameter: ~ up to 3.00. Tolerance: +0.013 -0.033.Diameter: Over 3.00 ~ up to 6...

IS0 529 - Straight Flute Individual Sizes - Plug.Thread Forms are Class 2 medium fit tolerance. (1) Diameter and pitch not mentioned in ISO.Sherwood HSS Taps are the general purpose option for thread...

IS0 529Straight Flute Individual Sizes.Sets of Three: 1 each, taper, second and plug lead. • Tap Type Straight Flute• Thread Standard Metric...

IS0 529Straight Flute Individual Sizes.(1) Diameter and pitch not mentioned in ISO. • Material Grade M2• Thread Size M14• Overall...

BS 1127.For use in diestocks to produce external screw threads. • Thread Standard Metric Coarse• Thread Size M14 X 1• Thread Direction Right...

BS 1127.For use with spanners to clean and repair existing external screw threads. • Thickness 5/8in.• Thread Direction Right Hand• Hex Width 1.30in...

IS0 529 - Straight Flute Individual Sizes - Plug.Thread Forms are Class 2 medium fit tolerance. (1) Diameter and pitch not mentioned in ISO.Sherwood HSS Taps are the general purpose option for thread...

IS0 529 - Straight Flute Individual Sizes - Second.Thread Forms are Class 2 medium fit tolerance. (1) Diameter and pitch not mentioned in ISO.Sherwood HSS Taps are the general purpose option for...

IS0 529Straight Flute Individual Sizes.Sets of Three: 1 each, taper, second and plug lead. • Tap Type Straight Flute• Thread Standard Metric...

BS 1127.For use in diestocks to produce external screw threads. • Material High Speed Steel• Thickness 7/16in.• Thread Size M14 x 1.25• Thread...

BS 1127.For use with spanners to clean and repair existing external screw threads. • Thickness 5/8in.• Thread Direction Right Hand• Hex Width 1.30in...

IS0 529 - Spiral Flute.Sherwood HSS Taps are the general purpose option for thread cutting in most materials including steel, some stainless steels, cast irons and non-ferrous materials such as...

IS0 529 - Spiral Point/Gun Nose • Material Grade M2• Thread Size M14• Overall Length 95mm• Class of Fit 6H• Tap Type Spiral...

IS0 529 - Straight Flute Individual Sizes - Plug.Thread Forms are Class 2 medium fit tolerance. (1) Diameter and pitch not mentioned in ISO.Sherwood HSS Taps are the general purpose option for thread...

IS0 529 - Straight Flute Individual Sizes - Second.Thread Forms are Class 2 medium fit tolerance. (1) Diameter and pitch not mentioned in ISO.Sherwood HSS Taps are the general purpose option for...

IS0 529Straight Flute Individual Sizes.Sets of Three: 1 each, taper, second and plug lead. • Tap Type Straight Flute• Thread Standard Metric...

IS0 529Straight Flute Individual Sizes.(1) Diameter and pitch not mentioned in ISO. • Material Grade M2• Thread Size M14• Overall...

BS 1127.For use in diestocks to produce external screw threads. • Material High Speed Steel• Thickness 7/16in.• Thread Size M14 x 1.5• Thread...

BS 1127.For use with spanners to clean and repair existing external screw threads. • Thread Direction Right Hand• Thickness 5/8in.• Material High Speed...

HSS Ground Thread TapsMetric CoarseSpiral FluteDimensions to ISO 529 • Finish/Coating Steam Tempered• Overall Length 95mm• Helix...

HSS Ground Thread TapsMetric CoarseSpiral Point/Gun NoseDimensions to ISO 529 • Finish/Coating Steam Tempered• Overall Length 95mm• Dimensions...

Sherwood HSS Taps are the general purpose option for thread cutting in most materials including steel, some stainless steels, cast irons and non-ferrous materials such as Aluminium, Brass and many...

1 each, taper, second and plug lead.IS0 529.(1) Diameter and pitch not mentioned in ISO. • Tap Type Straight Flute• Thread Standard Metric...

Sherwood HSS Taps are the general purpose option for thread cutting in most materials including steel, some stainless steels, cast irons and non-ferrous materials such as Aluminium, Brass and many...

BS 1127.For use with spanners to clean and repair existing external screw threads. • Thread Standard Metric Coarse• Thread Size M14 x 2• Thread...

BS 1127.For use in diestocks to produce external screw threads. • Thread Standard Metric Coarse• Thread Size M14 X 2• Thread Direction Right...

BS 1127.For use with spanners to clean and repair existing external screw threads. • Thread Standard Metric Coarse• Thread Size M14 x 2• Thread...

HSS-E 90° Straight Shank Single Hole Countersink• Metric• HSSE-Co• 90°• Manufactured to BS 328 : Part 5:1983• For deburring and chamfering • Standards...

For all ferrous and non-ferrous metals as well as for hard plastics. General purpose chamfering/deburring and countersinking tool. bright finish, 3 flute, ground all over.Made to DIN 335...

Carbide Straight Shank Stub DrillsMetricFor drilling into steel, cast steel, cast iron, chilled cast iron, malleable cast iron, non-ferrous materials and abrasive plastic.Point angle: 118°, helix...

Metric1/2" parallel shank. General purpose drills for light duty work, for drilling steels, cast iron, nickel brass and graphite. Reduced parallel shank 1/2". Point angle: 118°, helix angle:...

Bright Finish - TiN TippedGeneral purpose drills for light duty work, for drilling steels, cast iron, nickel brass and graphite. Reduced parallel shank 1/2".Point angle: 118°, helix angle:...

Series J100 - MetricGeneral purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium alloy and graphite. Point angle: 118°, helix angle: normal, web...

Series J100 - MetricGeneral purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium alloy and graphite. Point angle: 118°, helix angle: normal, web...

Series S100 HSS Straight Shank Stub DrillsMetric SizesGeneral purpose drills for use on automatics and turret lathes. Suitable for drilling steels, cast iron, alloy steel and malleable cast iron...

Metric.Used to produce a close tolerance surface finish by hand in almost any environment i.e. on site or in a workshop. Manufactured to BS 328 : Part 4 : 1990 and DIN 206B.METRIC...

Series T100 HSS Taper Shank Drills - MetricTo drill steels with a tensile strength up to 1.000 N/mm2, cast steel, grey cast iron, malleable cast iron, nickel brass and graphite. Point angle:...

Used to produce a close tolerance surface finish by enlarging pre-drilled holes to a finished size. Manufactured from HSS with a 45 bevelled head. Manufactured to BS 328-4.TOLERANCES (to...

Manufactured to DIN 212.Tolerances (to H7)Diameter: ~ up to 5.50. Tolerance: +0.004, -0.000.Diameter: Over 5.50 ~. Tolerance: +0.005, -0.000. • Shank Type Straight• Number of...

HSS-Co Taper Shank Drills - MetricHigh heat resistant drill for drilling alloyed and unalloyed steels and castings with a tensile strength over 800N/mm2. Especially suitable for hot and cold rolled...

Series J100 - MetricGeneral purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium alloy and graphite. Point angle: 118°, helix angle: normal, web...

Series T100 HSS Taper Shank Drills - MetricTo drill steels with a tensile strength up to 1.000 N/mm2, cast steel, grey cast iron, malleable cast iron, nickel brass and graphite. Point angle:...

Metric1/2" parallel shank. General purpose drills for light duty work, for drilling steels, cast iron, nickel brass and graphite. Reduced parallel shank 1/2". Point angle: 118°, helix angle:...

Series J100 - MetricGeneral purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium alloy and graphite. Point angle: 118°, helix angle: normal, web...

Series T100 HSS Taper Shank Drills - MetricTo drill steels with a tensile strength up to 1.000 N/mm2, cast steel, grey cast iron, malleable cast iron, nickel brass and graphite. Point angle:...

HSS-Co Taper Shank Drills - MetricHigh heat resistant drill for drilling alloyed and unalloyed steels and castings with a tensile strength over 800N/mm2. Especially suitable for hot and cold rolled...

Series J100Suitable for drilling steel, cast steel, alloyed and unalloyed, grey cast iron, spheroidal iron, sintered powder metal, German silver and graphite. Manufactured to BS 328/DIN338RN.Black...

Long Series E430T.Used for profile milling and producing open slots. Bright finish. Flute type: 30° helix. Manufactured to BS 122 : Part 4 : 1980.Metric Tolerances:Diameter: up to 38.00...

Long Series 5230T.Used for milling keyways and slots. Bright finish. Flute type: 30° helix. Manufactured to BS 122: Part 4: 1980.METRIC TOLERANCES:Diameter: ~ up to 3.00. Tolerance: +0.013 -0...

Short Series Type B210T.Used for die sinking, slot milling and profile milling. Bright finish. Flute type: 30° helix.Manufactured to BS 122 : Part 4 : 1980.Metric Tolerances:Diameter: ~ up to 3...

Short Series E410T.Used for profile milling and producing open slots. Bright finish. Flute type : 30° helix.Manufactured to BS 122 : Part 4 : 1980.METRIC TOLERANCES:Diameter: up to 38.00mm...

Short Series S210T - Metric.Used for milling keyways and slots. Bright finish. Flute type: 30° helix. Manufactured to BS 122: Part 4: 1980.METRIC TOLERANCES:Diameter: ~ up to 3.00. Tolerance: +0...