Drill Chuck Arbors & Sleeves

Bridgeport Drive to Jacobs TaperPrecision machined, fully hardened and ground to give maximum surface contact. • Length 135mm• Weight 450g• Product Type Drill Chuck Arbors• Shank...

Bridgeport Drive to Jacobs TaperPrecision machined, fully hardened and ground to give maximum surface contact. • Length 145mm• Weight 510g• Product Type Drill Chuck Arbors• Shank...

Bridgeport Drive to Jacobs TaperPrecision machined, fully hardened and ground to give maximum surface contact. • Length 135mm• Weight 460g• Product Type Drill Chuck Arbors• Shank...

Bridgeport Drive to Jacobs TaperPrecision machined, fully hardened and ground to give maximum surface contact. • Length 135mm• Weight 440g• Product Type Drill Chuck Arbors• Shank...

Bridgeport Drive to Jacobs TaperPrecision machined, fully hardened and ground to give maximum surface contact. • Length 130mm• Weight 420g• Product Type Drill Chuck Arbors• Shank...

Drill SleevesA range of quality traditional workholding equipment. Manufactured from high quality steel and case hardened all over. All sleeves and sockets are fully hardened and ground internally and externally. ISO 238 BS 1660 : 2. • Outside...

Drill SleevesA range of quality traditional workholding equipment. Manufactured from high quality steel and case hardened all over. All sleeves and sockets are fully hardened and ground internally and externally. ISO 238 BS 1660 : 2. • Outside...

Drill SleevesA range of quality traditional workholding equipment. Manufactured from high quality steel and case hardened all over. All sleeves and sockets are fully hardened and ground internally and externally. ISO 238 BS 1660 : 2. • Outside...

Drill SleevesA range of quality traditional workholding equipment. Manufactured from high quality steel and case hardened all over. All sleeves and sockets are fully hardened and ground internally and externally. ISO 238 BS 1660 : 2. • Outside...

Drill SleevesA range of quality traditional workholding equipment. Manufactured from high quality steel and case hardened all over. All sleeves and sockets are fully hardened and ground internally and externally. ISO 238 BS 1660 : 2. • Outside...

Drill SleevesA range of quality traditional workholding equipment. Manufactured from high quality steel and case hardened all over. All sleeves and sockets are fully hardened and ground internally and externally. ISO 238 BS 1660 : 2. • Outside...

A range of quality traditional workholding equipment. Manufactured from high quality steel and case hardened all over. All sleeves and sockets are fully hardened and ground internally and externally.ISO 238 BS 1660 : 2.Drill DriftsTo release Morse Taper...

A range of quality traditional workholding equipment. Manufactured from high quality steel and case hardened all over. All sleeves and sockets are fully hardened and ground internally and externally.ISO 238 BS 1660 : 2.Drill DriftsTo release Morse Taper...

A range of quality traditional workholding equipment. Manufactured from high quality steel and case hardened all over. All sleeves and sockets are fully hardened and ground internally and externally.ISO 238 BS 1660 : 2.Drill DriftsTo release Morse Taper...

A range of quality traditional workholding equipment. Manufactured from high quality steel and case hardened all over. All sleeves and sockets are fully hardened and ground internally and externally.ISO 238 BS 1660 : 2.Drill DriftsTo release Morse Taper...

A range of quality traditional workholding equipment. Manufactured from high quality steel and case hardened all over. All sleeves and sockets are fully hardened and ground internally and externally.ISO 238 BS 1660 : 2.Drill DriftsTo release Morse Taper...

KD Type - Morse Taper Shank to Din Taper ArborsPrecision machined, fully hardened and ground to give maximum surface contact.Fully hardened and ground Morse Taper to DIN 228. Chuck taper to DIN 238. • Length 176mm• Product...

KD Type - Morse Taper Shank to Din Taper ArborsPrecision machined, fully hardened and ground to give maximum surface contact.Fully hardened and ground Morse Taper to DIN 228. Chuck taper to DIN 238. • Length 159mm• Product...

KD Type - Morse Taper Shank to Din Taper ArborsPrecision machined, fully hardened and ground to give maximum surface contact.Fully hardened and ground Morse Taper to DIN 228. Chuck taper to DIN 238. • Length 134mm• Product...

KD Type - Morse Taper Shank to Din Taper ArborsPrecision machined, fully hardened and ground to give maximum surface contact.Fully hardened and ground Morse Taper to DIN 228. Chuck taper to DIN 238. • Length 111.5mm• Product...

KD Type - Morse Taper Shank to Din Taper ArborsPrecision machined, fully hardened and ground to give maximum surface contact.Fully hardened and ground Morse Taper to DIN 228. Chuck taper to DIN 238. • Length 125mm• Product...

KD Type - Morse Taper Shank to Din Taper ArborsPrecision machined, fully hardened and ground to give maximum surface contact.Fully hardened and ground Morse Taper to DIN 228. Chuck taper to DIN 238. • Length 106.5mm• Product...

Morse Taper Drive to Jacobs TaperPrecision machined, fully hardened and ground to give maximum surface contact. • Length 155mm• Weight 690g• Product Type Drill Chuck Arbors• Shank Type No.4...

Morse Taper Drive to Jacobs TaperPrecision machined, fully hardened and ground to give maximum surface contact. • Length 175mm• Weight 1000g• Product Type Drill Chuck Arbors• Shank Type No.4...

Morse Taper Drive to Jacobs TaperPrecision machined, fully hardened and ground to give maximum surface contact. • Length 170mm• Weight 860g• Product Type Drill Chuck Arbors• Shank Type No.4...

Morse Taper Drive to Jacobs TaperPrecision machined, fully hardened and ground to give maximum surface contact. • Length 160mm• Weight 730g• Product Type Drill Chuck Arbors• Shank Type No.4...

Morse Taper Drive to Jacobs TaperPrecision machined, fully hardened and ground to give maximum surface contact. • Length 155mm• Weight 680g• Product Type Drill Chuck Arbors• Shank Type No.4...

Morse Taper Drive to Jacobs TaperPrecision machined, fully hardened and ground to give maximum surface contact. • Length 135mm• Weight 700g• Product Type Drill Chuck Arbors• Shank Type No.4...

Morse Taper Drive to Jacobs TaperPrecision machined, fully hardened and ground to give maximum surface contact. • Length 145mm• Weight 520g• Product Type Drill Chuck Arbors• Shank Type No.3...

Morse Taper Drive to Jacobs TaperPrecision machined, fully hardened and ground to give maximum surface contact. • Length 135mm• Weight 380g• Product Type Drill Chuck Arbors• Shank Type No.3...

Morse Taper Drive to Jacobs TaperPrecision machined, fully hardened and ground to give maximum surface contact. • Length 125mm• Weight 340g• Product Type Drill Chuck Arbors• Shank Type No.3...

Morse Taper Drive to Jacobs TaperPrecision machined, fully hardened and ground to give maximum surface contact. • Length 125mm• Weight 330g• Product Type Drill Chuck Arbors• Shank Type No.3...

Morse Taper Drive to Jacobs TaperPrecision machined, fully hardened and ground to give maximum surface contact. • Length 120mm• Weight 310g• Product Type Drill Chuck Arbors• Shank Type No.3...

Morse Taper Drive to Threaded MountPrecision machined, fully hardened and ground to give maximum surface contact. • Length 125mm• Weight 370g• Product Type Drill Chuck Arbors• Shank Type No.3...

Morse Taper Drive to Threaded MountPrecision machined, fully hardened and ground to give maximum surface contact. • Length 125mm• Weight 360g• Product Type Drill Chuck Arbors• Shank Type No.3...

Morse Taper Drive to Jacobs TaperPrecision machined, fully hardened and ground to give maximum surface contact. • Length 110mm• Weight 180g• Product Type Drill Chuck Arbors• Shank Type No.2...

Morse Taper Drive to Jacobs TaperPrecision machined, fully hardened and ground to give maximum surface contact. • Length 115mm• Weight 220g• Product Type Drill Chuck Arbors• Shank Type No.2...

Morse Taper Drive to Jacobs TaperPrecision machined, fully hardened and ground to give maximum surface contact. • Length 110mm• Weight 180g• Product Type Drill Chuck Arbors• Shank Type No.2...

Morse Taper Drive to Jacobs TaperPrecision machined, fully hardened and ground to give maximum surface contact. • Length 105mm• Weight 160g• Product Type Drill Chuck Arbors• Shank Type No.2...

Morse Taper Drive to Jacobs TaperPrecision machined, fully hardened and ground to give maximum surface contact. • Length 100mm• Weight 150g• Product Type Drill Chuck Arbors• Shank Type No.2...