Reamers

Metric.Used to produce a close tolerance surface finish by hand in almost any environment i.e. on site or in a workshop. Manufactured to BS 328 : Part 4 : 1990 and DIN 206B.METRIC TOLERANCES:Diameter: ~ up to 3.00. Tolerance: +0.008, -0.007.Diameter:...

Used to produce a close tolerance surface finish in taper holes to allow the fitting of hardened and ground taper pins in the building of jigs, fixtures and dies. Manufactured to BS 328 : Part 4 : 199 and DIN 9A.\n\nMetric Tolerances\nDiameter: Over 1.5...

Left hand spiral flute, right hand cutting. Manufactured to BS 328-4.METRIC TOLERANCES (to H7):Diameter: ~ up to 3.00. Tolerance: High +0.008, Low -0.004.Diameter: Over 3.00 ~ up to 6.00. Tolerance: High +0.010, Low -0.005.Diameter: Over 6.00 ~ up to 10...

For all dimensional specifications please refer to our catalogue.

Sherwood Taper Pin hand reamers are used to produce a close tolerance surface finish in taper holes to allow the fitting of hardened and ground taper pins in the building of jigs, fixtures and dies. Manufactured to BS 328 : Part 4 : 199 and DIN 9A...

Sherwood machine reamers are used to produce a close tolerance surface finish by enlarging pre-drilled holes to a finished size. Manufactured from HSS with a 45 bevelled head. Conform to BS 122 : Part 2 and BS 328 Part 4.\n\nInch Tolerances\nDiameter: ~...

For all dimensional specifications please refer to our catalogue.

Manufactured to DIN 212.Tolerances (to H7)Diameter: ~ up to 5.50. Tolerance: +0.004, -0.000.Diameter: Over 5.50 ~. Tolerance: +0.005, -0.000. • Shank Type Straight• Number of Flutes 6• Cutting Direction Right...

Metric.Used to produce a close tolerance surface finish by hand in almost any environment i.e. on site or in a workshop. Manufactured to BS 328 : Part 4 : 1990 and DIN 206B.METRIC TOLERANCES:Diameter: ~ up to 3.00. Tolerance: +0.008, -0.007.Diameter:...

Used to produce a close tolerance surface finish in taper holes to allow the fitting of hardened and ground taper pins in the building of jigs, fixtures and dies. Manufactured to BS 328 : Part 4 : 199 and DIN 9A.\n\nMetric Tolerances\nDiameter: Over 1.5...

Left hand spiral flute, right hand cutting. Manufactured to BS 328-4.METRIC TOLERANCES (to H7):Diameter: ~ up to 3.00. Tolerance: High +0.008, Low -0.004.Diameter: Over 3.00 ~ up to 6.00. Tolerance: High +0.010, Low -0.005.Diameter: Over 6.00 ~ up to 10...

Used to produce a close tolerance surface finish by enlarging pre-drilled holes to a finished size to allow the fitting of hardened and ground taper pins in the building of jigs, fixtures and dies. \nManufactured to BS 328-4

Manufactured to DIN 212.Tolerances (to H7)Diameter: ~ up to 5.50. Tolerance: +0.004, -0.000.Diameter: Over 5.50 ~. Tolerance: +0.005, -0.000. • Shank Type Straight• Number of Flutes 6• Cutting Direction Right...

The European version of machine reamers ideally suited for use on high performance CNC machines. They are also available, to special order, with a higher cobalt content or made from solid carbide for the machining of tougher more exotic materials...

Metric.Used to produce a close tolerance surface finish by hand in almost any environment i.e. on site or in a workshop. Manufactured to BS 328 : Part 4 : 1990 and DIN 206B.METRIC TOLERANCES:Diameter: ~ up to 3.00. Tolerance: +0.008, -0.007.Diameter:...

Left hand spiral flute, right hand cutting. Manufactured to BS 328-4.METRIC TOLERANCES (to H7):Diameter: ~ up to 3.00. Tolerance: High +0.008, Low -0.004.Diameter: Over 3.00 ~ up to 6.00. Tolerance: High +0.010, Low -0.005.Diameter: Over 6.00 ~ up to 10...

Sherwood machine reamers are used to produce a close tolerance surface finish by enlarging pre-drilled holes to a finished size. Manufactured from HSS with a 45 bevelled head. Conform to BS 122 : Part 2 and BS 328 Part 4.\n\nInch Tolerances\nDiameter: ~...

Inch.Used to produce a close tolerance surface finish by hand in almost any environment i.e. on site or in a workshop. Manufactured to BS 328-4 and DIN 206B.INCH TOLERANCES:Diameter: ~ up to 0.1181. Tolerance: +0.0005, -0.0013.Diameter: Over 0.1181 ~ up...

For all dimensional specifications please refer to our catalogue.

For all dimensional specifications please refer to our catalogue.

Manufactured to DIN 212.\n\nTolerances (to H7)\nDiameter: ~ up to 5.5. Tolerance: +.4, -..\nDiameter: Over 5.5 ~. Tolerance: +.5, -..

Metric.Used to produce a close tolerance surface finish by hand in almost any environment i.e. on site or in a workshop. Manufactured to BS 328 : Part 4 : 1990 and DIN 206B.METRIC TOLERANCES:Diameter: ~ up to 3.00. Tolerance: +0.008, -0.007.Diameter:...

Left hand spiral flute, right hand cutting. Manufactured to BS 328-4.METRIC TOLERANCES (to H7):Diameter: ~ up to 3.00. Tolerance: High +0.008, Low -0.004.Diameter: Over 3.00 ~ up to 6.00. Tolerance: High +0.010, Low -0.005.Diameter: Over 6.00 ~ up to 10...

Metric.Used to produce a close tolerance surface finish by hand in almost any environment i.e. on site or in a workshop. Manufactured to BS 328 : Part 4 : 1990 and DIN 206B.METRIC TOLERANCES:Diameter: ~ up to 3.00. Tolerance: +0.008, -0.007.Diameter:...

Manufactured to DIN 212.Tolerances (to H7)Diameter: ~ up to 5.50. Tolerance: +0.004, -0.000.Diameter: Over 5.50 ~. Tolerance: +0.005, -0.000. • Shank Type Straight• Number of Flutes 6• Cutting Direction Right...

Metric.Used to produce a close tolerance surface finish by hand in almost any environment i.e. on site or in a workshop. Manufactured to BS 328 : Part 4 : 1990 and DIN 206B.METRIC TOLERANCES:Diameter: ~ up to 3.00. Tolerance: +0.008, -0.007.Diameter:...

Left hand spiral flute, right hand cutting. Manufactured to BS 328-4.METRIC TOLERANCES (to H7):Diameter: ~ up to 3.00. Tolerance: High +0.008, Low -0.004.Diameter: Over 3.00 ~ up to 6.00. Tolerance: High +0.010, Low -0.005.Diameter: Over 6.00 ~ up to 10...

The European version of machine reamers ideally suited for use on high performance CNC machines. They are also available, to special order, with a higher cobalt content or made from solid carbide for the machining of tougher more exotic materials...

Inch.Used to produce a close tolerance surface finish by hand in almost any environment i.e. on site or in a workshop. Manufactured to BS 328-4 and DIN 206B.INCH TOLERANCES:Diameter: ~ up to 0.1181. Tolerance: +0.0005, -0.0013.Diameter: Over 0.1181 ~ up...

Left hand spiral flute, right hand cutting. Manufactured to BS 122.INCH TOLERANCES:Diameter: ~ up to 1/8". Tolerance: High +0.0003, Low -0.0001.Diameter: Over 1/8" ~ up to 15/64". Tolerance: High +0.0004, Low -0.0002.Diameter: Over 15/64" ~ up to 3/8"...

The European version of machine reamers ideally suited for use on high performance CNC machines. They are also available, to special order, with a higher cobalt content or made from solid carbide for the machining of tougher more exotic materials...

Inch.Used to produce a close tolerance surface finish by hand in almost any environment i.e. on site or in a workshop. Manufactured to BS 328-4 and DIN 206B.INCH TOLERANCES:Diameter: ~ up to 0.1181. Tolerance: +0.0005, -0.0013.Diameter: Over 0.1181 ~ up...

Left hand spiral flute, right hand cutting. Manufactured to BS 122.INCH TOLERANCES:Diameter: ~ up to 1/8". Tolerance: High +0.0003, Low -0.0001.Diameter: Over 1/8" ~ up to 15/64". Tolerance: High +0.0004, Low -0.0002.Diameter: Over 15/64" ~ up to 3/8"...

Inch.Used to produce a close tolerance surface finish by hand in almost any environment i.e. on site or in a workshop. Manufactured to BS 328-4 and DIN 206B.INCH TOLERANCES:Diameter: ~ up to 0.1181. Tolerance: +0.0005, -0.0013.Diameter: Over 0.1181 ~ up...

For all dimensional specifications please refer to our catalogue.

Sherwood Taper Pin hand reamers are used to produce a close tolerance surface finish in taper holes to allow the fitting of hardened and ground taper pins in the building of jigs, fixtures and dies. Manufactured to BS 328 : Part 4 : 199 and DIN 9A...

Metric.Used to produce a close tolerance surface finish by hand in almost any environment i.e. on site or in a workshop. Manufactured to BS 328 : Part 4 : 1990 and DIN 206B.METRIC TOLERANCES:Diameter: ~ up to 3.00. Tolerance: +0.008, -0.007.Diameter:...

Used to produce a close tolerance surface finish in taper holes to allow the fitting of hardened and ground taper pins in the building of jigs, fixtures and dies. Manufactured to BS 328 : Part 4 : 199 and DIN 9A.\n\nMetric Tolerances\nDiameter: Over 1.5...

Left hand spiral flute, right hand cutting. Manufactured to BS 328-4.METRIC TOLERANCES (to H7):Diameter: ~ up to 3.00. Tolerance: High +0.008, Low -0.004.Diameter: Over 3.00 ~ up to 6.00. Tolerance: High +0.010, Low -0.005.Diameter: Over 6.00 ~ up to 10...

Long Series\nSuitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change.