Reamers

Inch.Used to produce a close tolerance surface finish by hand in almost any environment i.e. on site or in a workshop. Manufactured to BS 328-4 and DIN 206B.INCH TOLERANCES:Diameter: ~ up to 0.1181. Tolerance: +0.0005, -0.0013.Diameter: Over 0.1181 ~ up...

Inch.Sherwood Taper Pin hand reamers are used to produce a close tolerance surface finish in taper holes to allow the fitting of hardened and ground taper pins in the building of jigs, fixtures and dies. Manufactured to BS 328 : Part 4 : 1990 and DIN 9A...

Left hand spiral flute, right hand cutting. Manufactured to BS 122.INCH TOLERANCES:Diameter: ~ up to 1/8". Tolerance: High +0.0003, Low -0.0001.Diameter: Over 1/8" ~ up to 15/64". Tolerance: High +0.0004, Low -0.0002.Diameter: Over 15/64" ~ up to 3/8"...

Sherwood machine reamers are used to produce a close tolerance surface finish by enlarging pre-drilled holes to a finished size. Manufactured from HSS with a 45 bevelled head. Conform to BS 122 : Part 2 and BS 328 Part 4.INCH TOLERANCES:Diameter: ~ up to...

Inch.Used to produce a close tolerance surface finish by hand in almost any environment i.e. on site or in a workshop. Manufactured to BS 328-4 and DIN 206B.INCH TOLERANCES:Diameter: ~ up to 0.1181. Tolerance: +0.0005, -0.0013.Diameter: Over 0.1181 ~ up...

Inch.Sherwood Taper Pin hand reamers are used to produce a close tolerance surface finish in taper holes to allow the fitting of hardened and ground taper pins in the building of jigs, fixtures and dies. Manufactured to BS 328 : Part 4 : 1990 and DIN 9A...

Left hand spiral flute, right hand cutting. Manufactured to BS 122.INCH TOLERANCES:Diameter: ~ up to 1/8". Tolerance: High +0.0003, Low -0.0001.Diameter: Over 1/8" ~ up to 15/64". Tolerance: High +0.0004, Low -0.0002.Diameter: Over 15/64" ~ up to 3/8"...

Sherwood machine reamers are used to produce a close tolerance surface finish by enlarging pre-drilled holes to a finished size. Manufactured from HSS with a 45 bevelled head. Conform to BS 122 : Part 2 and BS 328 Part 4.INCH TOLERANCES:Diameter: ~ up to...

Inch.Used to produce a close tolerance surface finish by hand in almost any environment i.e. on site or in a workshop. Manufactured to BS 328-4 and DIN 206B.INCH TOLERANCES:Diameter: ~ up to 0.1181. Tolerance: +0.0005, -0.0013.Diameter: Over 0.1181 ~ up...

Metric.Used to produce a close tolerance surface finish by hand in almost any environment i.e. on site or in a workshop. Manufactured to BS 328 : Part 4 : 1990 and DIN 206B.METRIC TOLERANCES:Diameter: ~ up to 3.00. Tolerance: +0.008, -0.007.Diameter:...

Used to produce a close tolerance surface finish in taper holes to allow the fitting of hardened and ground taper pins in the building of jigs, fixtures and dies. Manufactured to BS 328 : Part 4 : 199 and DIN 9A.\n\nMetric Tolerances\nDiameter: Over 1.5...

Left hand spiral flute, right hand cutting. Manufactured to BS 328-4.METRIC TOLERANCES (to H7):Diameter: ~ up to 3.00. Tolerance: High +0.008, Low -0.004.Diameter: Over 3.00 ~ up to 6.00. Tolerance: High +0.010, Low -0.005.Diameter: Over 6.00 ~ up to 10...

Metric.Used to produce a close tolerance surface finish by hand in almost any environment i.e. on site or in a workshop. Manufactured to BS 328 : Part 4 : 1990 and DIN 206B.METRIC TOLERANCES:Diameter: ~ up to 3.00. Tolerance: +0.008, -0.007.Diameter:...

Long Series - Inch\nKennedy KC3 throwaway 3* flute endmills are manufactured HSS-Co 5% making them much tougher than HSS. This means that Kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. \n*Except: 1mm...

Long Series

TiN-Coated to allow elevated cutting speeds and help to extend tool life.\n\nShort Series\n\nLong Series

Long Series

Long Series

Long Series\nSuitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change.

Long Series

TiN-Coated to allow elevated cutting speeds and help to extend tool life.\n\nShort Series\n\nLong Series

Long Series

Long Series

Long Series\nSuitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change.

Long Series

TiN-Coated to allow elevated cutting speeds and help to extend tool life.\n\nShort Series\n\nLong Series

Long Series

Long Series - Inch\nKennedy KC3 throwaway 3* flute endmills are manufactured HSS-Co 5% making them much tougher than HSS. This means that Kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. \n*Except: 1mm...

Short Series - Inch\nKennedy KC3 throwaway 3* flute endmills are manufactured HSS-Co 5% making them much tougher than HSS. This means that Kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. \n*Except: 1mm...

Short Series - Inch\nKennedy KC3 throwaway 3* flute endmills are manufactured HSS-Co 5% making them much tougher than HSS. This means that Kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. \n*Except: 1mm...

Long Series

TiN-Coated to allow elevated cutting speeds and help to extend tool life.\n\nShort Series\n\nLong Series

Long Series

Ball Nose - Metric\nLong Series - Metric\n \nSuitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change.\n\n*Except: 1mm cutters, 2mm...

Long Series

Long Series

Long Series\nSuitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change.

Ball Nose - Metric\nLong Series - Metric\n \nSuitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change.\n\n*Except: 1mm cutters, 2mm...

Long Series

TiN-Coated to allow elevated cutting speeds and help to extend tool life.\n\nShort Series\n\nLong Series